patrick/zephyr
1
0
Fork 0
Code Issues Pull requests Actions 7 Packages Projects Releases Wiki Activity
zephyr/drivers
History
Michael Scott 44e977c467 drivers: modem: cmd_handler: save 1 char for NUL in match_buf 
For parsing purposes we need to add a NUL to the end of match_buf.

When there is no CR/LF in the incoming rx bufs then we fill match_buf
to its max size.  This ended up with an off by one error which was
overflowing match_buf into the following data.

To account for this, let's fill the buffer to size - 1 so that we
leave room for the NUL at the end and stop corrupting data.

Signed-off-by: Michael Scott <mike@foundries.io>
2020-02-10 12:29:41 +02:00
..
adc adc: common: handle gain of 128 in adc_gain_invert() 2020-02-05 14:28:09 -06:00
audio drivers: audio: tlv320dac310x: Convert to the new GPIO API 2020-02-05 12:00:36 +01:00
bluetooth kernel: overhaul unused stack measurement 2020-02-08 10:02:35 +02:00
can drivers: can: mcp2515: Switch to new GPIO API 2020-02-05 12:00:36 +01:00
clock_control kconfig: Replace some single-symbol 'if's with 'depends on' 2020-02-08 08:32:42 -05:00
console console: uart: Ifdef an include 2020-01-28 14:02:54 -05:00
counter kconfig: Replace some single-symbol 'if's with 'depends on' 2020-02-08 08:32:42 -05:00
crypto kconfig: Replace some single-symbol 'if's with 'depends on' 2020-02-08 08:32:42 -05:00
debug tracing: cleanup and split segger/rtt configuration options 2020-02-07 15:58:05 -05:00
display kconfig: Replace some single-symbol 'if's with 'depends on' 2020-02-08 08:32:42 -05:00
dma drivers: dma: stm32: Fix compiler warning 2020-02-04 15:49:48 -06:00
eeprom kconfig: Replace some single-symbol 'if's with 'depends on' 2020-02-08 08:32:42 -05:00
entropy global: Fix up leading/trailing blank lines in files 2020-01-27 17:41:55 -06:00
espi kconfig: Replace some single-symbol 'if's with 'depends on' 2020-02-08 08:32:42 -05:00
ethernet gpio: rename typedef for devicetree flags 2020-02-05 12:00:36 +01:00
flash kconfig: Replace some single-symbol 'if's with 'depends on' 2020-02-08 08:32:42 -05:00
gpio drivers: gpio: Add sam4e defines 2020-02-05 08:18:02 -06:00
hwinfo drivers: hwinfo: Use HAL for reading deviceID. 2019-12-17 09:11:37 +01:00
i2c drivers: i2c_slave: eeprom: fixes incorrect declaration 2020-02-05 18:46:35 -05:00
i2s treewide: use full path to clock_control/stm32_clock_control.h header 2020-01-26 17:52:12 +01:00
ieee802154 drivers/ieee802154: Adapt cc1200 driver to new GPIO API 2020-02-05 12:00:36 +01:00
interrupt_controller drivers/interrup_controller: stm32: stm32_exti_enable could be void 2020-02-05 12:00:36 +01:00
ipm treewide: use full path to ipm.h header 2020-01-26 17:52:12 +01:00
kscan kconfig: Replace some single-symbol 'if's with 'depends on' 2020-02-08 08:32:42 -05:00
led drivers: led: ht16k33: reorder pin interrupt configuration 2020-02-05 12:00:36 +01:00
led_strip kconfig: Replace some single-symbol 'if's with 'depends on' 2020-02-08 08:32:42 -05:00
lora drivers: lora: build with newlib 2020-02-07 16:00:47 -06:00
modem drivers: modem: cmd_handler: save 1 char for NUL in match_buf 2020-02-10 12:29:41 +02:00
net drivers: modem: Implement uart_pipe interface for GSM modem 2020-01-28 12:44:17 +02:00
neural_net kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
pcie global: Remove leading/trailing blank lines in files 2019-12-11 19:17:27 +01:00
pinmux kconfig: Replace some single-symbol 'if's with 'depends on' 2020-02-08 08:32:42 -05:00
ps2 drivers: ps2: Compile out PS/2 in terms of an eSPI peripheral 2019-11-20 15:02:08 -05:00
ptp_clock kconfig: Clean up header comments and make them consistent 2019-11-04 17:31:27 -05:00
pwm drivers: gpio_esp32: update to use new GPIO API 2020-02-05 12:00:36 +01:00
sensor kconfig: Replace some single-symbol 'if's with 'depends on' 2020-02-08 08:32:42 -05:00
serial uart_stm32: Fix flow misspelling 2020-02-07 08:08:25 -06:00
spi drivers: spi: spi_mcux_dspi: fix missing context unlock on busy bus 2020-02-08 11:41:21 +02:00
timer native_posix: timer: Improve arch_busy_wait() doc 2020-02-07 11:48:41 +01:00
usb usb_dc_stm32: Convert usb disconnect gpio to new gpio api 2020-02-05 12:00:36 +01:00
video video: mt9m114: Fix integer handling issues 2019-11-15 10:11:05 +01:00
watchdog kconfig: Replace some single-symbol 'if's with 'depends on' 2020-02-08 08:32:42 -05:00
wifi gpio: replace gpio pin write/read with set/get 2020-02-05 12:00:36 +01:00
CMakeLists.txt drivers: Add basic LoRa driver support 2019-12-21 12:20:24 +01:00
Kconfig tracing: cleanup and split segger/rtt configuration options 2020-02-07 15:58:05 -05:00