zephyr

History

Sebastian Bøe 55ee53ce91 cmake: Prepend 'cmake_minimum_required()' into 'app' build scripts Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the application and test build scripts. Modern versions of CMake will spam users with a deprecation warning when the toplevel CMakeLists.txt does not specify a CMake version. This is documented in bug #8355. To resolve this we include a cmake_minimum_required() line into the toplevel build scripts. Additionally, cmake_minimum_required is invoked from within boilerplate.cmake. The highest version will be enforced. This patch allows us to afterwards change CMake policy CMP000 from OLD to NEW which in turn finally rids us of the verbose warning. The extra boilerplate is considered more acceptable than the verbosity of the CMP0000 policy. Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>		2018-08-15 04:06:50 -07:00
..
boards	samples: drivers: Add sample application for LP3943	2018-04-27 10:46:53 -05:00
src	samples: drivers: Add sample application for LP3943	2018-04-27 10:46:53 -05:00
CMakeLists.txt	cmake: Prepend 'cmake_minimum_required()' into 'app' build scripts	2018-08-15 04:06:50 -07:00
prj.conf	samples: drivers: Add sample application for LP3943	2018-04-27 10:46:53 -05:00
README.rst	samples: drivers: Add sample application for LP3943	2018-04-27 10:46:53 -05:00
sample.yaml	samples: drivers: Add sample application for LP3943	2018-04-27 10:46:53 -05:00

README.rst

.. _lp3943:

LP3943: 16-Channel RGB, White-LED Driver
########################################

Overview
********

This sample controls 16 LEDs connected to an LP3943 driver, in
a continuous pattern of turning them on one at a time (at a one
second interval) until they're all on, and then turning them off in
reverse order.

Requirements
************

The :ref:`96b_neonkey` board has an LP3943 driver and 16 LEDs on board,
so we'll use this board for our example.

Building and Running
********************

Build the application for the :ref:`96b_neonkey` board, which has an
LP3943 driver included.

.. zephyr-app-commands::
   :zephyr-app: samples/drivers/led_lp3943
   :board: 96b_neonkey
   :goals: build
   :compact:

For flashing the application, refer to the Flashing section of the
:ref:`96b_neonkey` board documentation.

When you connect to the board's serial console, you should see the
following output in addition to the LED pattern:

.. code-block:: none

   ***** BOOTING ZEPHYR OS v1.11.99 *****
   [general] [INF] main: Found LED device LP3943
   [general] [INF] main: Displaying the pattern

References
**********

- LP3943: http://www.ti.com/lit/ds/snvs256d/snvs256d.pdf