Gerard Marull-Paretas 800e31ae76 boards: arm: hexiwear_k64: use regulator driver for 1V8 and 3V3 ... The LDO line (1V8) used by MAX30101 can be enabled using a regulator device instead of custom code in the board pinmux.c. The same applies for the 3V3 line used by multiple sensors. NOTE: also enabled gpioa, required by LDO_EN. Spotted thanks to build-time issue (current code did not work...). Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>		2022-03-22 23:24:44 -05:00
..
doc	boards: arm: hexiwear_k64: use regulator driver for 1V8 and 3V3	2022-03-22 23:24:44 -05:00
board.cmake	boards: arm: Remove OPENSDA_FW cmake variables from nxp boards	2020-07-09 07:58:50 -05:00
hexiwear_k64-pinctrl.dtsi	boards: hexiwear_k64: add pinctrl groups for hexiwear_k64	2022-03-03 13:00:20 -06:00
hexiwear_k64.dts	boards: arm: hexiwear_k64: use regulator driver for 1V8 and 3V3	2022-03-22 23:24:44 -05:00
hexiwear_k64.yaml	boards: hexiwear_k64: Drop SPI as supported board feature	2021-05-05 11:08:33 -05:00
hexiwear_k64_defconfig	boards: remove pinmux usage for all kinetis boards	2022-03-22 12:36:04 +01:00
Kconfig.board	kconfig: Clean up header comments and make them consistent	2019-11-04 17:31:27 -05:00
Kconfig.defconfig	boards: arm: hexiwear_k64: use regulator driver for 1V8 and 3V3	2022-03-22 23:24:44 -05:00