zephyr/drivers/clock_control/clock_stm32_ll_common.h
Pierre-Emmanuel Novac 7ac8dd87e4 drivers/clock_control: stm32: Configure MCO1 on STM32F1
MCO1 is also available on STM32F1 series (on top of STM32F4), allow
selection of MCO1 source with CLOCK_STM32_MCO1_SRC_* Kconfig parameters.
Available MCO1 sources are slightly different between STM32F4
(LSE, HSE, HSI, PLLCLK) and STM32F103 (HSE, HSI, PLLCLK/2, SYSCLK), and
STM32F105/F107 have a few more (EXT_HSE, PLL2CLK, PLLI2SCLK, PLLI2SCLK/2).
MCO1 on STM32F1 does not have a configurable divider (unlike STM32F4),
HAL call only configures source.
STM32F1 do not have MCO2.

Signed-off-by: Pierre-Emmanuel Novac <piernov@piernov.org>
2022-09-06 09:57:35 +02:00

71 lines
2.2 KiB
C

/*
*
* Copyright (c) 2017 Linaro Limited.
*
* SPDX-License-Identifier: Apache-2.0
*/
#ifndef ZEPHYR_DRIVERS_CLOCK_CONTROL_STM32_LL_CLOCK_H_
#define ZEPHYR_DRIVERS_CLOCK_CONTROL_STM32_LL_CLOCK_H_
#include <stm32_ll_utils.h>
#if CONFIG_CLOCK_STM32_MCO1_SRC_NOCLOCK
#define MCO1_SOURCE LL_RCC_MCO1SOURCE_NOCLOCK
#elif CONFIG_CLOCK_STM32_MCO1_SRC_EXT_HSE
#define MCO1_SOURCE LL_RCC_MCO1SOURCE_EXT_HSE
#elif CONFIG_CLOCK_STM32_MCO1_SRC_LSE
#define MCO1_SOURCE LL_RCC_MCO1SOURCE_LSE
#elif CONFIG_CLOCK_STM32_MCO1_SRC_HSE
#define MCO1_SOURCE LL_RCC_MCO1SOURCE_HSE
#elif CONFIG_CLOCK_STM32_MCO1_SRC_HSI
#define MCO1_SOURCE LL_RCC_MCO1SOURCE_HSI
#elif CONFIG_CLOCK_STM32_MCO1_SRC_PLLCLK
#define MCO1_SOURCE LL_RCC_MCO1SOURCE_PLLCLK
#elif CONFIG_CLOCK_STM32_MCO1_SRC_PLLCLK_DIV2
#define MCO1_SOURCE LL_RCC_MCO1SOURCE_PLLCLK_DIV_2
#elif CONFIG_CLOCK_STM32_MCO1_SRC_PLL2CLK
#define MCO1_SOURCE LL_RCC_MCO1SOURCE_PLL2CLK
#elif CONFIG_CLOCK_STM32_MCO1_SRC_PLLI2SCLK
#define MCO1_SOURCE LL_RCC_MCO1SOURCE_PLLI2SCLK
#elif CONFIG_CLOCK_STM32_MCO1_SRC_PLLI2SCLK_DIV2
#define MCO1_SOURCE LL_RCC_MCO1SOURCE_PLLI2SCLK_DIV2
#elif CONFIG_CLOCK_STM32_MCO1_SRC_SYSCLK
#define MCO1_SOURCE LL_RCC_MCO1SOURCE_SYSCLK
#endif
#if CONFIG_CLOCK_STM32_MCO2_SRC_SYSCLK
#define MCO2_SOURCE LL_RCC_MCO2SOURCE_SYSCLK
#elif CONFIG_CLOCK_STM32_MCO2_SRC_PLLI2S
#define MCO2_SOURCE LL_RCC_MCO2SOURCE_PLLI2S
#elif CONFIG_CLOCK_STM32_MCO2_SRC_HSE
#define MCO2_SOURCE LL_RCC_MCO2SOURCE_HSE
#elif CONFIG_CLOCK_STM32_MCO2_SRC_PLLCLK
#define MCO2_SOURCE LL_RCC_MCO2SOURCE_PLLCLK
#endif
/* Macros to fill up multiplication and division factors values */
#define z_pllm(v) LL_RCC_PLLM_DIV_ ## v
#define pllm(v) z_pllm(v)
#define z_pllp(v) LL_RCC_PLLP_DIV_ ## v
#define pllp(v) z_pllp(v)
#define z_pllq(v) LL_RCC_PLLQ_DIV_ ## v
#define pllq(v) z_pllq(v)
#define z_pllr(v) LL_RCC_PLLR_DIV_ ## v
#define pllr(v) z_pllr(v)
#if defined(STM32_PLL_ENABLED)
void config_pll_sysclock(void);
uint32_t get_pllout_frequency(void);
uint32_t get_pllsrc_frequency(void);
#endif
void config_enable_default_clocks(void);
/* function exported to the soc power.c */
int stm32_clock_control_init(const struct device *dev);
#endif /* ZEPHYR_DRIVERS_CLOCK_CONTROL_STM32_LL_CLOCK_H_ */