zephyr

History

Jukka Rissanen 86689030e8 net: Clarify logging in networking code Remove network specific default and max log level setting and start to use the zephyr logging values for those. Remove LOG_MODULE_REGISTER() from net_core.h and place the calls into .c files. This is done in order to avoid weird compiler errors in some cases and to make the code look similar as other subsystems. Fixes #11343 Fixes #11659 Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>		2018-12-07 12:00:04 +02:00
..
src	net: Clarify logging in networking code	2018-12-07 12:00:04 +02:00
CMakeLists.txt	samples, tests: Use semi-accurate project names	2018-10-27 21:31:25 -04:00
prj.conf	samples: net: wpan_serial: Convert to new logging system	2018-10-04 14:13:57 +03:00
README	wpan_serial: Update README	2016-12-02 12:41:03 +02:00
sample.yaml	usb: Remove USB VID / PID for sanity check builds	2018-04-03 15:58:33 -04:00

README

Application implementing 802.15.4 "serial-radio" protocol.

How to use:

1. Build and flash Zephyr application to Quark board with 802.15.4 radio,
   at the moment CC2520 radio is supported.
2. Connect board to Linux PC, /dev/ttyACM[number] should appear
3. Run Contiki-based native border router (6lbr, native-router, etc)
     Example for Contiki:
     $ cd examples/ipv6/native-border-router
     $ make
     $ sudo ./border-router.native -v5 -s ttyACM0 fd01::1/64

Now you have Contiki native border router, simple web server should show some
802.15.4 devices. Web server address is printed in the border-router output
screen:
...
Server IPv6 addresses:
 0x62c5c0: =>fd01::212:4b00:531f:113a
...
Go to http://[fd01::212:4b00:531f:113a]/

It shall show you Neighbors and Routes.

PS: Make sure your disto ModemManager is disabled, otherwise it sends AT commands
to our device ;)

$ sudo systemctl disable ModemManager.service