Alexandre Bourdiol 877379fba4 boards: arm: stm32: move "st,prescaler" to timers instead of pwm ... Prescaler was misplaced in pwm binding, instead of timers binding. For example, TIM6/TIM7 doesn't have PWM capability, but have a prescaler. This change also prepares the introduction of timer based counter (which requires prescaler at timer level) Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>		2021-11-16 09:55:30 -06:00
..
doc	boards: arm: nucleo_h743zi: full Arduino SPI support	2021-06-29 11:32:15 -04:00
support	boards: nucleo_h743zi: Fix openocd configuration	2020-12-03 11:33:20 -05:00
arduino_r3_connector.dtsi	boards: nucleo_h743zi: Add SPI support	2020-11-19 12:35:12 +01:00
board.cmake	boards: arm: nucleo_h743zi: add support for stm32cubeprogrammer runner	2020-11-04 14:47:35 -06:00
Kconfig.board	boards: arm: initial suport for NUCLEO-H743ZI	2020-03-11 17:10:58 +01:00
Kconfig.defconfig	boards: nucleo_h743zi: enable ethernet support	2020-11-05 08:30:06 -06:00
nucleo_h743zi.dts	boards: arm: stm32: move "st,prescaler" to timers instead of pwm	2021-11-16 09:55:30 -06:00
nucleo_h743zi.yaml	boards: arm: Add usbotg_fs to nucleo_h743 and nucleo_h753.	2021-03-29 13:42:46 -04:00
nucleo_h743zi_defconfig	boards: nucleo_h743zi: Use dts for clocks configuration	2021-05-04 13:57:41 -05:00