634416bc49
Introduce hwinfo driver for Texas Instruments SimpleLink CC13xx/CC26xx
SOC series, with support for retrieving device's ID and cause of reset.
By default, the pre-programmed, 8-bytes length IEEE MAC address is used
for device's ID, with option ('HWINFO_CC13XX_CC26XX_USE_BLE_MAC') for
use 6-bytes length BLE MAC instead. By default, read-only values stored
in FCFG (Factory Configuration) are used but additional Kconfig option
('HWINFO_CC13XX_CC26XX_ALWAYS_USE_FACTORY_DEFAULT') is also provided,
which allows to use values from writable CCFG (Customer Configuration)
area. In all cases, device ID value is provided in big-endian which
matches what TI's UniFlash tool returns.
For reset cause, 'SysCtrlResetSourceGet()' function from TI's driver
library is used and its value is mapped to Zephyr's implementation.
Importantly, only root cause of reset is available on CC13xx/CC26xx
platform as described in MCU Technical Reference Manual ('RESET_SRC'
field in 'RESETCTL' register):
"Shows the root cause of the last system reset. More than the
reported reset source can have been active during the last
system reset but only the root cause is reported."
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
99 lines
2.2 KiB
C
99 lines
2.2 KiB
C
/*
|
|
* Copyright (c) 2023 Piotr Dymacz
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include <errno.h>
|
|
#include <string.h>
|
|
#include <zephyr/drivers/hwinfo.h>
|
|
#include <zephyr/sys/byteorder.h>
|
|
|
|
#include <driverlib/sys_ctrl.h>
|
|
#include <inc/hw_ccfg.h>
|
|
#include <inc/hw_fcfg1.h>
|
|
#include <inc/hw_memmap.h>
|
|
|
|
#ifdef CONFIG_HWINFO_CC13XX_CC26XX_USE_BLE_MAC
|
|
#define CC13XX_CC26XX_DEVID_SIZE 6
|
|
#else
|
|
#define CC13XX_CC26XX_DEVID_SIZE 8
|
|
#endif
|
|
|
|
ssize_t z_impl_hwinfo_get_device_id(uint8_t *buffer, size_t length)
|
|
{
|
|
uint8_t *mac;
|
|
|
|
if (IS_ENABLED(CONFIG_HWINFO_CC13XX_CC26XX_USE_BLE_MAC)) {
|
|
if (IS_ENABLED(CONFIG_HWINFO_CC13XX_CC26XX_ALWAYS_USE_FACTORY_DEFAULT) ||
|
|
sys_read32(CCFG_BASE + CCFG_O_IEEE_BLE_0) == 0xFFFFFFFF ||
|
|
sys_read32(CCFG_BASE + CCFG_O_IEEE_BLE_1) == 0xFFFFFFFF) {
|
|
mac = (uint8_t *)(FCFG1_BASE + FCFG1_O_MAC_BLE_0);
|
|
} else {
|
|
mac = (uint8_t *)(CCFG_BASE + CCFG_O_IEEE_BLE_0);
|
|
}
|
|
} else if (IS_ENABLED(CONFIG_HWINFO_CC13XX_CC26XX_USE_IEEE_MAC)) {
|
|
if (IS_ENABLED(CONFIG_HWINFO_CC13XX_CC26XX_ALWAYS_USE_FACTORY_DEFAULT) ||
|
|
sys_read32(CCFG_BASE + CCFG_O_IEEE_MAC_0) == 0xFFFFFFFF ||
|
|
sys_read32(CCFG_BASE + CCFG_O_IEEE_MAC_1) == 0xFFFFFFFF) {
|
|
mac = (uint8_t *)(FCFG1_BASE + FCFG1_O_MAC_15_4_0);
|
|
} else {
|
|
mac = (uint8_t *)(CCFG_BASE + CCFG_O_IEEE_MAC_0);
|
|
}
|
|
}
|
|
|
|
if (length > CC13XX_CC26XX_DEVID_SIZE) {
|
|
length = CC13XX_CC26XX_DEVID_SIZE;
|
|
}
|
|
|
|
/* Provide device ID (MAC) in big endian */
|
|
sys_memcpy_swap(buffer, mac, length);
|
|
|
|
return length;
|
|
}
|
|
|
|
int z_impl_hwinfo_get_reset_cause(uint32_t *cause)
|
|
{
|
|
uint32_t reset_src;
|
|
|
|
reset_src = SysCtrlResetSourceGet();
|
|
|
|
switch (reset_src) {
|
|
case RSTSRC_PWR_ON:
|
|
*cause = RESET_POR;
|
|
break;
|
|
case RSTSRC_PIN_RESET:
|
|
*cause = RESET_PIN;
|
|
break;
|
|
case RSTSRC_VDDS_LOSS:
|
|
__fallthrough;
|
|
case RSTSRC_VDDR_LOSS:
|
|
*cause = RESET_BROWNOUT;
|
|
break;
|
|
case RSTSRC_CLK_LOSS:
|
|
*cause = RESET_CLOCK;
|
|
break;
|
|
case RSTSRC_SYSRESET:
|
|
*cause = RESET_SOFTWARE;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int z_impl_hwinfo_clear_reset_cause(void)
|
|
{
|
|
return -ENOSYS;
|
|
}
|
|
|
|
int z_impl_hwinfo_get_supported_reset_cause(uint32_t *supported)
|
|
{
|
|
*supported = (RESET_PIN
|
|
| RESET_SOFTWARE
|
|
| RESET_BROWNOUT
|
|
| RESET_POR
|
|
| RESET_CLOCK);
|
|
|
|
return 0;
|
|
}
|