patrick/zephyr
1
0
Fork 0
Code Issues Pull requests Actions 8 Packages Projects Releases Wiki Activity
zephyr/samples/sensor/tmp108
History
Kumar Gala 5d36157c7c sensors: Remove unnecessary Kconfig setting of sensors 
Sensor Kconfig sybmols should be enabled if CONFIG_SENSOR=y
and the devicetree node for the sensor is enabled.  We can
remove explicitly enabling specific sensor drivers in .conf
files.

Signed-off-by: Kumar Gala <galak@kernel.org>
2022-07-25 15:18:56 +02:00
..
src samples: migrate includes to contain <zephyr/...> prefix 2022-05-06 11:29:59 +02:00
CMakeLists.txt sample: sensor: tmp108: Add ti tmp108 sample 2021-12-17 21:15:25 +01:00
Kconfig everywhere: fix typos 2022-03-18 13:24:08 -04:00
prj.conf sensors: Remove unnecessary Kconfig setting of sensors 2022-07-25 15:18:56 +02:00
README.rst sample: sensor: tmp108: Add ti tmp108 sample 2021-12-17 21:15:25 +01:00
sample.yaml sample: sensor: tmp108: Add ti tmp108 sample 2021-12-17 21:15:25 +01:00

README.rst 

.. _tmp108_sample:

TMP108 sample
#############

Description
***********

This sample writes the temperature to the console once every 3 seconds. There are
macro definitions included for turning off and on alerts if that is set up, and
also using low power one shot mode.

Requirements
************

A board with the :dtcompatible:`ti,tmp108` built in to its :ref:`devicetree <dt-guide>`,
or a devicetree overlay with such a node added.

Sample Output
=============

.. code-block:: console

	** Booting Zephyr OS build zephyr-v2.6.0-1923-g72bb75a360ce  ***
	TI TMP108 Example, arm
	Temperature is 22.875C
	Temperature is 22.875C
	Temperature is 22.875C
	Temperature is 22.875C
	Temperature is 22.875C
	Temperature is 22.875C