.. |
acsip
|
dts: arm: s76s: add AcSIP S76S SiP support
|
2021-03-18 08:48:30 -05:00 |
atmel
|
drivers: serial: uart_sam0: Add pinctrl support
|
2021-07-30 14:37:20 -05:00 |
broadcom
|
dts: arm: broadcom: viper-a72: paxdma: Add interrupt property
|
2021-03-08 20:24:04 -06:00 |
cypress
|
dts: psoc6: Use valid IRQ prio levels for CM4
|
2021-08-11 10:06:13 -05:00 |
infineon
|
soc: arm: add infineon_xmc series support
|
2020-05-09 14:21:44 +02:00 |
microchip
|
Microchip: MEC172x: I2C driver
|
2021-08-25 13:07:45 -04:00 |
nordic
|
dts: nrf52840: add some missing nodes
|
2021-08-17 17:52:43 -04:00 |
nuvoton
|
soc: arm: rename soc/arm/nuvoton as soc/arm/nuvoton_numicro
|
2021-08-07 20:37:24 -04:00 |
nxp
|
drivers: adc: add LPADC driver support to mimxrt685 platform
|
2021-08-25 18:02:00 -04:00 |
quicklogic
|
dts: add EOS S3 GPIO definitions
|
2021-03-11 08:58:20 -05:00 |
renesas/gen3
|
dts: arm: rcar_gen3_cr7: Add I2C support to DTS
|
2021-07-14 20:58:50 -04:00 |
seeed
|
dts/arm/seeed: lora-e5: Update hse clock configuration
|
2021-08-24 07:19:12 -04:00 |
silabs
|
gecko pwm: pwm description to efr32fg1 and brd4250b
|
2021-04-02 18:45:33 -04:00 |
st
|
dts: arm: st: wb: no HSE bypass capability
|
2021-08-24 22:14:20 -04:00 |
ti
|
linker: cc13x2_cc26x2: CCFG registers as partition
|
2021-04-15 12:25:55 +02:00 |
xilinx
|
dts: arm: xilinx: zynqmp: add device tree data for GEM Ethernet controllers
|
2021-06-21 20:11:00 -04:00 |
armv6-m.dtsi
|
dts: arm: Add #address-cells to nvic nodes
|
2021-08-02 15:02:09 -04:00 |
armv7-m.dtsi
|
dts: arm: Add #address-cells to nvic nodes
|
2021-08-02 15:02:09 -04:00 |
armv7-r.dtsi
|
arch: arm: Fix incorrect Cortex-R device tree specification.
|
2019-10-11 16:27:14 +02:00 |
armv8-m.dtsi
|
dts: arm: Add #address-cells to nvic nodes
|
2021-08-02 15:02:09 -04:00 |
armv8.1-m.dtsi
|
dts: arm: Add #address-cells to nvic nodes
|
2021-08-02 15:02:09 -04:00 |