zephyr/include/power.h
Kumar Gala cc334c7273 Convert remaining code to using newly introduced integer sized types
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.  This handles the remaining includes and kernel, plus
touching up various points that we skipped because of include
dependancies.  We also convert the PRI printf formatters in the arch
code over to normal formatters.

Jira: ZEP-2051

Change-Id: Iecbb12601a3ee4ea936fd7ddea37788a645b08b0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-04-21 11:38:23 -05:00

125 lines
4.1 KiB
C

/*
* Copyright (c) 2012-2014 Wind River Systems, Inc.
*
* SPDX-License-Identifier: Apache-2.0
*/
#ifndef __INCpower
#define __INCpower
#ifdef __cplusplus
extern "C" {
#endif
#ifdef CONFIG_SYS_POWER_MANAGEMENT
/* Constants identifying power state categories */
#define SYS_PM_ACTIVE_STATE 0 /* SOC and CPU are in active state */
#define SYS_PM_LOW_POWER_STATE 1 /* CPU low power state */
#define SYS_PM_DEEP_SLEEP 2 /* SOC low power state */
#define SYS_PM_NOT_HANDLED SYS_PM_ACTIVE_STATE
extern unsigned char _sys_pm_idle_exit_notify;
/**
* @brief Power Management Hook Interface
*
* @defgroup power_management_hook_interface Power Management Hook Interface
* @ingroup power_management_api
* @{
*/
/**
* @brief Function to disable power management idle exit notification
*
* _sys_soc_resume() would be called from the ISR of the event that caused
* exit from kernel idling after PM operations. For some power operations,
* this notification may not be necessary. This function can be called in
* _sys_soc_suspend to disable the corresponding _sys_soc_resume notification.
*
*/
static inline void _sys_soc_pm_idle_exit_notification_disable(void)
{
_sys_pm_idle_exit_notify = 0;
}
/**
* @brief Hook function to notify exit from deep sleep
*
* The purpose of this function is to notify exit from
* deep sleep. The implementation of this function can vary
* depending on the soc specific boot flow.
*
* This function would switch cpu context to the execution point at the time
* system entered deep sleep power state. Some implementations may not require
* use of this function e.g. the BSP or boot loader may do the context switch.
*
* In boot flows where this function gets called even at cold boot, the
* function should return immediately.
*
*/
void _sys_soc_resume_from_deep_sleep(void);
/**
* @brief Hook function to notify exit from kernel idling after PM operations
*
* This function would notify exit from kernel idling if a corresponding
* _sys_soc_suspend() notification was handled and did not return
* SYS_PM_NOT_HANDLED.
*
* This function would be called from the ISR context of the event
* that caused the exit from kernel idling. This will be called immediately
* after interrupts are enabled. This is called to give a chance to do
* any operations before the kernel would switch tasks or processes nested
* interrupts. This is required for cpu low power states that would require
* interrupts to be enabled while entering low power states. e.g. C1 in x86. In
* those cases, the ISR would be invoked immediately after the event wakes up
* the CPU, before code following the CPU wait, gets a chance to execute. This
* can be ignored if no operation needs to be done at the wake event
* notification. Alternatively _sys_soc_pm_idle_exit_notification_disable() can
* be called in _sys_soc_suspend to disable this notification.
*
*/
void _sys_soc_resume(void);
/**
* @brief Hook function to allow entry to low power state
*
* This function is called by the kernel when it is about to idle.
* It is passed the number of clock ticks that the kernel calculated
* as available time to idle.
*
* The implementation of this function is dependent on the soc specific
* components and the various schemes they support. Some implementations
* may choose to do device PM operations in this function, while others
* would not need to, because they would have done it at other places.
*
* Typically a wake event is set and the soc or cpu is put to any of the
* supported low power states. The wake event should be set to wake up
* the soc or cpu before the available idle time expires to avoid disrupting
* the kernel's scheduling.
*
* This function is entered with interrupts disabled. It should
* re-enable interrupts if it had entered a low power state.
*
* @param ticks the upcoming kernel idle time
*
* @retval SYS_PM_NOT_HANDLED If low power state was not entered.
* @retval SYS_PM_LOW_POWER_STATE If CPU low power state was entered.
* @retval SYS_PM_DEEP_SLEEP If SOC low power state was entered.
*/
extern int _sys_soc_suspend(s32_t ticks);
/**
* @}
*/
#endif /* CONFIG_SYS_POWER_MANAGEMENT */
#ifdef __cplusplus
}
#endif
#endif /* __INCpower */