USB High-Speed devices must be able to operate at both High-Speed and
Full-Speed. The USB specification allows the device to have different
configurations depending on connection speed. Modify the API to reflect
USB Specification requirements on what can (e.g. configurations) and
what cannot (e.g. VID, PID) be speed dependent.
While the class configurations for different speeds are completely
independent, the actual class instances are shared between operating
speeds (because only one speed can be active at a time). Classes are
free to provide different number of interfaces and/or endpoints for
different speeds. The endpoints are assigned for all operating speeds
during initialization.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Introduce usbd_class_iter for keeping endpoint assignment variables
and the single-linked list node. No functional changes right now, but
this paves the way for independent speed specific configurations.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Rename the internal input callback structure to input_callback. This is
for coherency with "INPUT_CALLBACK_DEFINE" and other similar code paths
in Zephyr, and also to avoid confusion with terminology.
This is an internal structure, applications should not have any
references to it so there should be no need for any release note
entries.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Replace mutexes with semaphores to protect the channels in conjunction with
a priority boost algorithm based on the observers' priority.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
Add support for mutable devices. Mutable devices are those which
can be modified after declaration, in-place, in kernel mode.
In order for a device to be mutable, the following must be true
* `CONFIG_DEVICE_MUTABLE` must be y-selected
* the Devicetree bindings for the device must include
`mutable.yaml`
* the Devicetree node must include the `zephyr,mutable` property
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
This commit adds the public header for the GNSS API, along
with the initial GNSS Kconfig file and an entry in the
common linker file for registered GNSS data callbacks.
A very naive implementation of the GNSS data callback is
provided as well in drivers/gnss/gnss_publish.c
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
ZBus stores observers in two ways: statically using a list and dynamically
using a memory slab. Both present limitations. Static observers work only
for channel definition. The dynamic observers rely on a memory slab that
forces the user to manage its size to avoid issues with adding
observers. This commit fixes the static allocation problem by using the
iterable sections for allocating observation data and replacing the VDED
execution sequence since now it is possible to prioritize static observer
execution. All the runtime observers are dynamically allocated on the heap
instead of a specific memory pool.
BREAK changes (only internal, not APIs):
* ZBus channel metadata changed. Remove the observers' static array
pointer. Rename the `runtime_observers` pointer to `observers`. Add
`observer_start_idx` and `observer_end_idx`;
* Change the VDED execution sequence. The position (on definition time),
the priority in conjunction with the lexical order, is considered for
static post-definition time observers. At last, the runtime observer
follows the adding sequence;
* Replace the `CONFIG_ZBUS_RUNTIME_OBSERVERS_POOL_SIZE` with
`CONFIG_ZBUS_RUNTIME_OBSERVERS`.
New APIs:
* New iterable section iterators (for channels and observers) can now
receive a user_data pointer to keep context between the function calls;
* New `ZBUS_LISTENER_DEFINE_WITH_ENABLE(_name, _cb, _enable)` and
`ZBUS_SUBSCRIBER_DEFINE_WITH_ENABLE(_name, _queue_size, enable)` that
enable developers define disabled observers. They need to be enabled
during runtime to receive notifications from the bus;
* `ZBUS_CHAN_ADD_OBS` macro for adding post-definition static observers of
a channel.
Important changes:
* Move the ZBus LD file content to the `common-ram.ld` LD file. That was
necessary to make ZBus compatible with some Xtensa and RISCV boards.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
The generated scripts don't include a definition for any symbol indicating
the end of statically allocated memory (such as "_end"). Add a shared cmake
fragment, ram-end.cmake, which contains the necessary instructions to
define _end and z_mapped_end consistently to align with the other sample
linker scripts.
Signed-off-by: Keith Packard <keithp@keithp.com>
Device dependencies are not always required, so make them optional via
CONFIG_DEVICE_DEPS. When enabled, the gen_device_deps script will run so
that dependencies are collected and part of the final image. Related
APIs will be also made available. Since device dependencies are used in
just a few places (power domains), disable the feature by default. When
not enabled, a second linking pass will not be required.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use the "device_deps" naming scheme to emphasize we are storing device
dependencies. The fact we are using device handles to store them is an
implementation detail.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new async API based on the RTIO subsystem. This new API allows:
1. Users to create sampling configs (telling the sensor which channels
they want to sample together).
2. Sample data in an asynchronous manner which provides greater control
over the data processing priority.
3. Fully backwards compatible API with no driver changes needed for
functionality (they are needed to improve performance).
4. Helper functions for processing loop.
Signed-off-by: Yuval Peress <peress@google.com>
Use iterable sections to handle devices list. This simplifies devices
implementation by using standard APIs.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Clean up log_const to utilize macros for handling sections.
Update database_gen.py to match naming convention change.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Cleanup linker scripts for net_buf_pool section to use the linker
script related iterable section macros.
Also replace _net_buf_pool_list with macro's instead to complete
iterable section usage.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
The initshell sections in the linker scripts where associated with theo
old shell code. The old shell code has been removed for some time so
remove references to initshell in the linker scripts and size_calc.py
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
We have an entry for shell_root_cmds using zephyr_iterable_section so
remove duplicate handling of shell_root_cmds.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Convert handling of shell_root_cmds, shell_subcmds, and
shell_dynamic_subcmds to use iterable section macros.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
The log_backed section is now using the iterable section macros so
we should be using zephyr_iterable_section() in common-rom.cmake
so the generation of the linker script is correct for arm clang
compiles.
Fixes#56440
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Add missing users of ITERABLE_SECTION_ROM* macros that should exist
in common-rom.cmake so that linker script generation for arm clang
works for those users.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Add missing users of ITERABLE_SECTION_RAM* macros that should exist
in common-ram.cmake so that linker script generation for arm clang
works for those users.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
_static_thread_data should be in ROM as its static data. So move
it from common-ram.cmake to common-rom.cmake and fix it the params
we call zephyr_iterable_section with.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
This commit updates all in-tree code to use `CONFIG_CPP` instead of
`CONFIG_CPLUSPLUS`, which is now deprecated.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This replaces the requirement for applications to manually
register MCUmgr handlers by having an iterable section which
then automatically registers the handlers at boot time.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Add support for userspace with RTIO by making rtio and rtio_iodev
k_objects. As well as adding three syscalls for copying in submissions,
copying out completions, and starting tasks with submit.
For the small devices Zephyr typically runs on one of the most important
attributes tends to be low memory usage. To maintain the low footprint of
RTIO and its current executor implementations the rings are not shared with
userspace. Sharing the rings it turns out would require copying submissions
before working with them to avoid TOCTOU issues.
The API could still support shared rings in the future so that a
kernel thread could directly poll, copy, verify, and start the submitted
work. This would require a third executor implementation that maintains its
own copy of submissions similiar to how io_uring in Linux works.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Adds an iterable section in ROM to hold constant information, such as
vendor and model name, for all enabled sensor driver instances. This
will be used by the future sensor subsystem to enumerate all available
sensors in the system.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
The `ARCH` init level was added to solve a specific problem, call init
code (SYS_INIT/devices) before `z_cstart` in the `intel_adsp` platform.
The documentation claims it runs before `z_cstart`, but this is only
true if the SoC/arch takes care of calling:
```c
z_sys_init_run_level(_SYS_INIT_LEVEL_ARCH);
```
Which is only true for `intel_adsp` nowadays. So in practice, we now
have a platform specific init level. This patch proposes to do things in
a slightly different way. First, level name is renamed to `EARLY`, to
emphasize it runs in the early stage of the boot process. Then, it is
handled by the Kernel (inside `z_cstart()` before calling
`arch_kernel_init()`). This means that any platform can now use this
level. For `intel_adsp`, there should be no changes, other than
`gcov_static_init()` will be called before (I assume this will allow to
obtain coverage for code called in EARLY?).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
We have cases where some devices needs to be initialized very early and
before c_start is call, i.e. to setup very early console or to setup
memory. Traditionally this would be hardcoded as part of the soc layer
and not using device model or the init levels.
This patch adds a new level ARCH, which will be called in early
architecture code and before we jump to the kernel code.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit removes the `k_mem_pool` section for the memory pool API,
which was removed in the v2.5.0 release.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
ALIGN_WITH_INPUT is an argument for zephyr_linker_section, not
zephyr_linker_section_configure. Fix the calls for section .emulators
accordingly.
Signed-off-by: Abe Levkoy <alevkoy@google.com>
Updates the ztest_test_fail() function to allow failures in setup.
When executed, a failed assert will fail every test in the suite owning
the setup function. This was verified by adding a suite which asserts
in the setup function and has a test that should pass. During
exeuction, ztest marks the test as failing.
In order to verify exection I also added 2 new APIs:
- ZTEST_EXPECT_FAIL(suite_name, test_name)
- ZTEST_EXPECT_SKIP(suite_name, test_name)
Signed-off-by: Yuval Peress <peress@google.com>
The linker_script generating tool needs to ensure that .tdata gets added
to the TLS data section while .tbss is added to the TLS BSS section.
Signed-off-by: Keith Packard <keithp@keithp.com>
The commit dee79d2b66 introduced a new
linker output section ztest_suite_node in linker/common-ram.ld but
without updating the corresponding linker_script/common/common-ram.cmake
linker script generator code.
This causes test cases for arm Compiler 6 to fail.
Add the same section to common-ram.ld.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit reworks the linker script generation and linking stages in
order to better support fixed section location as required by #38836.
Today we have the following generated linker scripts and the elf output
depending on the system configuration:
- linker_app_smem_unaligned.cmd --> app_smem_unaligned_prebuilt.elf
- linker_zephyr_prebuilt.cmd --> zephyr_prebuilt.elf
- linker.cmd --> zephyr.elf
as not all linker scripts may be created and as there is a need for the
possibility to move gen handles earlier then those stages has been
renamed into more generic names so that with this commit we have:
- linker_zephyr_pre0.cmd --> zephyr_pre0.elf
- linker_zephyr_pre1.cmd --> zephyr_pre1.elf
- linker.cmd --> zephyr.elf
This also means that is the stage zephyr_pre1 is not needed, then build
can go from `zephyr_pre0.elf` to `zephyr.elf`.
The gen_handles.py has been changed so it now uses `zephyr_pre0.elf` as
input. This ensures that the handles array are final when invoking the
next build and linking stages.
To keep the current behavior of generating the isr table and kobj hash
of what was `zephyr_prebuilt` stage the code blocks contolling isr
generation and kobj hash has been relocated to be located after
app_smem and device handle generation.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
To prepare for linker script creation with flexible number of linker
passes depending on system configuration then the Zephyr CMake linker
script generator has been updated to use pass names instead of pass
numbers.
This allows greater flexibility as a section can now be active based on
the settings on the pass and not the linking pass index number.
As part of this, the `PASS` processing in `linker_script_common.cmake`
has been adjusted so that it properly handles when a linking pass is
handling multiple settings, such as both `LINKER_APP_SMEM_UNALIGNED`
and `DEVICE_HANDLES_PASS1` in same linking pass.
As the number of linking passes are more flexible, then the PASS
argument in `zephyr_linker_section()` and
`zephyr_linker_section_configure()` has been updated to also support
a `NOT <name>` argument, for example: `PASS NOT LINKER_ZEPHYR_FINAL`.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Converted existing ld script templates into CMake files.
This commit takes the common-ram.ld, common-rom.ld, debug-sections.ld,
and thread-local-storage.ld and creates corresponding CMake files for
the linker script generator.
The CMake files uses the new Zephyr CMake functions:
- zephyr_linker_section()
- zephyr_linker_section_configure()
- zephyr_linker_section_obj_level()
to generate the same linker result as the existing C preprocessor based
scheme.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
