The find_package_handle_standard_args function is used in FindLlvmLld
without being imported. This may cause FindLlvmLld to fail
non-determistically based on if it's evaluated in a CMake build/process
before find_package_handle_standard_args is included.
We should include what we use. Explicitly include
find_package_handle_standard_args.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
The syscall generation phase parses all header files to look
for potential syscalls, and emits all the relevant files to
enable syscalls. However, this results in all the syscall
marshalling functions being included in the final binary.
This is due to these functions being referred to inside
the dispatch list, resulting in ineffective garbage
collection during linking. Previous commits allows each
drivers and subsystems to specify which header files
containing syscalls are relevant. So this commit changes
the syscall generation to only include the syscalls needed
for the build in the syscall dispatch list and removing
various bits related to that. This allows the linker to
garbage collect unused syscall related function, and thus
reducing final binary size.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a new cmake function zephyr_syscall_header() which
will be used in the future to limit the scope of syscalls
in the built binary. Currently this is just an empty stub
so that add zephyr_syscall_header() to kernel, subsys, etc.
without breaking the build.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
As of today MWDT toolchain in case of Zephyr may use few
tools from GNU toolchain - GNU compiler for DTS preprocessing
and objcopy for section renaming.
Currently we were trying to find any GNU compiler & objcopy
which start to cause compatibility issues for new targets -
i.e. not every objcopy knows new ARC targets.
Let's use ARC GNU tools from Zephyr SDK as we still usually
require it when building with MWDT for other tools like DTC
(device tree compiler)
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Fixes an issue with relative paths both with and without using
sysbuild where they would not be updated properly or a warning
would previously be emitted.
Signed-off-by: Torsten Rasmussen <torsten.rasmussen@nordicsemi.no>
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Fixes: #57139
Snippets provides the possibility of defining EXTRA_DTC_OVERLAY_FILE and
EXTRA_CONF_FILE in snippets.
Snippets must co-exist with existing infrastructure of
EXTRA_DTC_OVERLAY_FILE and EXTRA_CONF_FILE, and a user specifying a
snippet must be able to specify extra files for adjusting the snippet.
This means that if the following is specified:
`-DSNIPPET=some_snippet -DEXTRA_CONF_FILE=extra.conf`
then `extra.conf` may contain adjustments to the snippet.
Similar to sysbuild. Imagine a sysbuild controlled image uses a default
snippet for building, by ensuring that any extra
`-D<image>_EXTRA_CONF_FILE=extra.conf` arguments takes precedence over
the snippet we allow users to make adjustments if they need.
This commit introduces a snippets scope where snippet scoped variables
can be set with `zephyr_set()` and then `zephyr_get()` will take the
snippet scoped variables into consideration before returning.
Adjust calls to `zephyr_get(EXTRA_DTC_OVERLAY_FILE)` and
`zephyr_get(EXTRA_CONF_FILE)` to use `MERGE` to ensure all scopes are
considered.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
zephyr_get() supports multiple scopes when returning variables.
Variables are returned based on the scope's priority.
To facilitate creation of more scopes in Zephyr for variable handling
additional functions are introduced.
- zephyr_create_scope(<scope>)
creates a new scope
- zephyr_set(<var> <val>... SCOPE <scope>)
set the value of a variable in the specified scope.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Adding the possibility to have the list returned in reversed order when
using `zephyr_get(... MERGE).
`zephyr_get(... MERGE)` creates a list which populates the content based
on variable settings in the following scopes, in this order:
sysbuild, cache, environment, local.
This works well for lists where content first in list has highest
precedence, such as ROOTs settings.
However, for settings where the value last in the list will overwrite
values earlier in the list, we want the list to be reversed, examples
of such can be CONF_FILE, OVERLAY_CONFIG, DTC_OVERLAY_FILE, where the
content of the file last in the list will overrule the content from an
earlier file.
So to ensure that a DTC_OVERLAY_FILE defined as cache takes precedence
over an env or local scope variable the possibility of reversing the
list must be available.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit introduces an internal FORCE_CONF_FILE CMake setting which
allows higher order build systems to generate a configuration file
which will always take precedence.
This means that in case a user tries to change any setting to be
different than the defined value in the FORCE_CONF_FILE provide file(s),
then a warning will be printed and the setting will be reset to the
value given in the FORCE_CONF_FILE file.
Example of such warning:
<path>/.config.sysbuild:1: warning: BOOTLOADER_MCUBOOT
(defined at Kconfig.zephyr:766) set more than once.
Old value "n", new value "y".
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Align Zephyr modules with other user facing variables where settings
can be defined or extended, meaning Zephyr modules now supports:
ZEPHYR_MODULES and EXTRA_ZEPHYR_MODULES.
Support for ZEPHYR_EXTRA_MODULES is kept foir backward compatibility.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit introduces EXTRA_DTC_OVERLAY_FILE.
This allows users to specify additional devicetree overlays in addition
to a sample / board specific default devicetree overlay files.
It also allows snippets to provide extra devicetree overlays on addition
to sample / board specific overlays.
The name EXTRA_DTC_OVERLAY_FILE clearly indicates the purpose and
follows the naming scheme of EXTRA_ in front of variable name.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit introduces EXTRA_CONF_FILE and deprecates OVERLAY_CONFIG.
It has often caused confusion that OVERLAY_CONFIG adds extra
configuration fragments to the value of CONF_FILE (default: prj.conf),
but the similar named variable DTC_OVERLAY_FILE replaces the default
dtc overlay file used by the build system.
To remove such confusion, this commit introduces the EXTRA_ prefix in
front of CONF_FILE to clearly indicate it's purpose.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit extends zephyr_get() to support multiple variable names to
be fetched into a single variable.
Example:
zephyr_get(FOO VAR FOO_A FOO_B FOO_C)
will lookup each FOO_A, FOO_B, FOO_C for supported scopes and return
the value in FOO of the first scope encountered having one of the
variables defined.
If MERGE is specified, then all scopes for all vars are looped and the
variable values are merged into FOO and returned.
This functionality will allow to deprecate user-facing settings while
ensuring that both the new and deprecated variables are considered
in zephyr_get() and also taking into consideration the scope with
highest precedence.
This allows Zephyr CMake to do:
zephyr_get(FOO VAR FOO DEPRECATED_FOO)
zephyr_get(BAR MERGE VAR BAR DEPRECATED_BAR)
This allows support of old and new setting for a given number of
releases.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Also add a comment in each file reminding to keep them the same.
Fixes 251f269e23 ("west: v0.14.0 is required now (and soon, v1.1")
Confusing error message before this commit:
```
-- Found west (found suitable version 0.13.1, minimum required is 0.7.1)
CMake Error at SOF/zephyr/cmake/modules/zephyr_module.cmake:77 (message):
Traceback (most recent call last):
File "SOF/zephyr/scripts/zephyr_module.py", line 733, in <module>
main()
File "SOF/zephyr/scripts/zephyr_module.py", line 678, in main
west_projs = west_projects()
^^^^^^^^^^^^^^^
File "SOF/zephyr/scripts/zephyr_module.py", line 536, in west_projects
from west.configuration import MalformedConfig
ImportError: cannot import name 'MalformedConfig'
from 'west.configuration'
(west/src/west/configuration.py)
```
Clearer error message after this commit:
```
CMake Error at SOF/zephyr/cmake/modules/west.cmake:68 (message):
The detected west version, 0.13.1, is unsupported.
The minimum supported version is 0.14.0.
Please upgrade with:
/usr/bin/python3.11 -m pip install --upgrade west
```
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This configures the KCONFIG_ROOT variable to perform variable
substitution, this allows external applications/modules to supply
variables for this when will then be correctly used.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds a Kconfig option which controls the version of the application
to use when the image is signed using imgtool.
When an application VERSION file is present, the default value will be
identical to the application version, else it will be 0.0.0+0, but a
project may still decide another value, if it so prefers.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Generalize the VERSION and version.h generation so that the same
infrastructure can be reused for generating other version related
header files, such as an application version header.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes a string comparison which is missing quotes, this works
on the first invocation but fails on the second if quotes are
not present.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Add a new flag to zephyr_iterable_section, NUMERIC, that configures
sorting to be numeric (up to 2 digits), that is, 2 comes before e.g. 10.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The 2c98a001a4 (#57597) cause
regression with ARC MWDT toolchain.
Restore CREATE_OBJ_LEVEL wildcard pattern to be suitable for
both GNU and MWDT toolchains. We return asterisk symbol which
was dropped in 2c98a001a4
(but keep rest of the changes to wildcard pattern).
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
When the optional env_suffix_${env_var} was not set, USER_CACHE_DIR was
slightly malformed and had double slashes,
e.g. /home/user/.cache//zephyr.
To fix it string(JOIN ...) is used, which only sets slashes when
necessary.
Signed-off-by: Manoel Brunnen <mb@lee-brunnen.de>
This fixes a minor issue in sysbuild, where `-DOVERLAY_CONFIG=...` would
be applied not only to the main application, but also sysbuild itself.
This was incorrect, because sysbuild imports a different Kconfig tree
than normal Zephyr builds, so the same Kconfig fragment file would not
necessarily be valid for both.
This adds a new variable SB_OVERLAY_CONFIG to resolve this ambiguity.
It functions along the lines of SB_CONF_FILE, with both being sysbuild-
specific versions of existing variables.
To ensure that OVERLAY_CONFIG is still passed on to the main application
verbatim, its value is now loaded in `configuration_files.cmake`, rather
than `kconfig.cmake`. This is because the former file is not imported by
sysbuild, and it is where the related variables, such as CONF_FILE and
DTC_OVERLAY_FILE, are loaded as well.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Fixes an issue where variables like BOARD_ROOT would be provided
to sysbuild but would then be lost on target images.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Cleanup RAM layout so that the RAM_REGION is now in the RAM memory
region. Put .bss in RAM_REGION.
This means we have a proper program header for the RAM region.
As part of this extend zephyr_linker_symbol to allow it to take
an OBJECT paramater to specify the region to associate a symbol to.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
For developers ease, let's try to find the simulator
thru west if the environment variables that tell where
the simulator is are not set.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch from using a generator expression to computing the value with a
conditional so that it is available during the execution of kconfig instead
of only being available while generating the build script.
Signed-off-by: Keith Packard <keithp@keithp.com>
Due to many layers of indirections (Github Actions, Docker scripts, SOF
build scripts, etc.), thesofproject/sof/pull/7452's first attempt to
turn off VLAs ended up setting `-DSPARSE=gar bage`:
west build ... -- '-DSPARSE=y -DCONFIG_LOG_USE_VLA=n'
Quoting issues are typical when trying to pass parameters through too
many layers of indirections. In this case, the mistake set the $SPARSE
variable to the 'y -DCONFIG_LOG_USE_VLA=n' garbage which printed this
confusing and time-consuming error message:
Setting SPARSE=y -DCONFIG_LOG_USE_VLA=n is deprecated.
Worse: this enabled sparse (!) while silently ignoring the garbage
trailing after "y".
1. Enable sparse only when $SPARSE is equal to "y" and nothing
else. This stops enabling sparse when `-DSPARSE=gar bage` which draws
more attention to the warning and gives a little more incentive to
leave the deprecated option behind. Don't make any difference between
the "n" and "gar bage" values because $SPARSE is deprecated so not
worth that much CMake code.
2. Add quotes in the deprecation message to make garbage values more
obvious, now:
Setting SPARSE='y -DCONFIG_LOG_USE_VLA=n' is deprecated.
Fixes: 60196ca112 ("cmake: sparse: deprecate old sparse support")
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This function allows subsystems to define libraries which get added to the
link command after all other libraries and modules. It's useful when using
a toolchain library, like libc or libgcc, as those can get added when
processing the 'lib' directory, before any module libraries and hence might
not get used to resolve symbols from modules.
Signed-off-by: Keith Packard <keithp@keithp.com>
Follow-up fixes to 64c7f50229
("cmake: extensions: fix zephyr_dt_preprocess() CPP handling") that
weren't urgent enough for the hotfix, or didn't get noticed:
- error out on missing CPP argument again (this regression was
introduced in 64c7f50229)
- use a UNIX manpage style argument arity format (formatting issues
were present when the function was introduced)
- fix incorrect signature comment: the CPP arguments are the
preprocessor and its arguments, not CMAKE_DTS_PREPROCESSOR
(this was present when the function was introduced)
Fixes: 64c7f50229
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This option argument needs to be able to accept a list of arguments.
One use case is the way CMAKE_DTS_PREPROCESSOR is set in
cmake/compiler/armclang/generic.cmake.
Reported-by: Kumar Gala <kumar.gala@intel.com>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Cache the property GNULD_LINKER_IS_BFD between cmake invocations.
It is observed that, in repeated builds (2nd time and later),
this property becomes true even for non-bfd compatible linker.
So cache it to avoid any surprises.
Fixes#56501
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Tighten up the interface boundaries by adding an extension function
that separates *how* we preprocess the DTS from *what* DTS files we
are preprocessing. This involves a functional change to the pre_dt
module.
This is useful cleanup but is also groundwork for relying on this
helper function when adding system devicetree support.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This list processing procedure will be useful elsewhere, so prep for
not repeating ourselves. Put it in a new zephyr_list() function whose
signature has room to grow if we keep adding list processing
extensions.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
When the build system was being split up into modules under
cmake/modules, most of the resulting cmake modules had their inputs
and outputs documented in top-of-file comments. The dts module is an
exception, which makes it harder to use since its contracts aren't
defined. Fix this by adding a contract.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Create a separate module that sets up all our devicetree handling, by
setting up common variables that would apply to any and all DT
processing. This is then included in the regular dts module that we
include in zephyr_default.cmake.
The separation of this code from dts.cmake is groundwork for enabling
system devicetree in Zephyr, which will need the same definitions
included into its scope.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Due to Hyrum's Law, there are users out in the wild depending on this
directory existing to place their own generated files, so it'd break
things unnecessarily to not do this if we don't have a DTS, as
explained in a source code comment.
However, this doesn't really have anything to do with DTS processing,
so split it into its own module to separate concerns. This isn't
really a CMake module in the usual sense of something that defines
functions you can use, and is therefore a form of technical debt. The
decision was made to accept this because fixing this is a larger task
for the files in cmake/modules/, since there are multiple other
examples of this in here.
This also paves the way for inserting another module in between the
generated_file_directories and dts modules that itself depends on
these directories existing.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The name of each commented section should match the name in the "table
of contents", for consistency and so people can jump from contents to
implementations more easily with their editors' search functions.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
device_extern.h was still generated with an #error directive, not really
useful was it was never designed to be included directly, but via
device.h.
Fixes#56425
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fixes: #56235
Changes to the Zephyr VERSION file is not picked up by CMake and thus
not picked up by Kconfig which may rely on the KERNELVERSION setting.
Fix this by setting CMAKE_CONFIGURE_DEPENDS on the Zephyr VERSION file.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This adds a new output variable to FindGnuLd.cmake to indicate
if ld.bfd is found. Since we now ask the compilers for their
preferred ld.bfd linker, it may not match using the existing
string equal test to ${CROSS_COMPILE}ld.bfd. So set the new
variable GNULD_LINKER_IS_BFD to true if ld.bfd, and use it to
pass an extra argument to compiler to make it use ld.bfd.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This asks the clang if it has its own preference for ld.lld.
This is to mirror what we are doing to find GNU ld, and to
make sure we are using the linker clang is using.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This asks the compiler if it has its own preference for ld.bfd.
This is useful for LLVM (when CONFIG_LLVM_USE_LD=y) so we know
which linker clang is using.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This introduces a new cmake module FindGnuLd.cmake to do
the work to discover GNU ld (of binutils).
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When checking that modules contain a file `modules/modules.cmake`,
the CMake file only actually checked for the existence of the module
root, not the `modules/modules.cmake` file inside of it.
Signed-off-by: Pete Dietl <pete.dietl@worldcoin.org>
Add a new script, snippets.py, which is responsible for searching
SNIPPET_ROOT for snippet definitions, validating them, and informing
the build system about what needs doing as a result.
Use this script in snippets.cmake to:
- validate any discovered snippet.yml files
- error out on undefined snippets
- add a 'snippets' build system target that prints all snippet
names (analogous to 'boards' and 'shields' targets)
- handle any specific build system settings properly,
by include()-ing a file it generates
With this patch, you can define or extend a snippet in a snippet.yml
file anywhere underneath a directory in SNIPPET_ROOT. The snippet.yml
file format has a schema whose initial definition is in a new file,
snippet-schema.yml.
This initial snippet.yml file format supports adding .overlay and
.conf files, like this:
name: foo
append:
DTC_OVERLAY_FILE: foo.overlay
OVERLAY_CONFIG: foo.conf
boards:
myboard:
append:
DTC_OVERLAY_FILE: myboard.overlay
OVERLAY_CONFIG: myboard.conf
/my-regular-expression-over-board-names/:
append:
DTC_OVERLAY_FILE: myregexp.overlay
OVERLAY_CONFIG: myregexp.conf
(Note that since the snippet feature is intended to be extensible, the
same snippet name may appear in multiple files throughout any
directory in SNIPPET_ROOT, with each addition augmenting prior ones.)
This initial syntax aligns with the following snippet design goals:
- extensible: you can add board-specific support for an existing
snippet in another module
- able to combine multiple types of configuration: we can now apply a
.overlay and .conf at the same time
- specializable: this allows you to define settings that only apply
to a selectable set of boards (including with regular expression
support for matching against multiple similar boards that follow
a naming convention)
- DRY: you can use regular expressions to apply the same snippet
settings to multiple boards like this: /(board1|board2|...)/
This patch is not trying to design and implement everything up front.
Additional features can and will be added to the snippet.yml format
over time; using YAML as a format allows us to make
backwards-compatible extensions as needed.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Basic things needed to integrate the new 'snippets' feature into the
build system. The main CMake variable which controls snippets is
SNIPPET. It is a whitespace-or-semicolon-separated list of snippet
names.
- Add minimal new cmake module for processing snippets. This just has
basic infrastructure for processing a SNIPPET variable into
SNIPPET_AS_LIST, and warning the user if they try to change it too
late.
- Integrate the new module into the build system, via
zephyr_default.cmake
This is anologous to the shields and boards modules' boilerplate and
input variables.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Moves the deprecation notice for prj_<board>.conf files to the
proper location where other deprecation notices are located.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This now throws an error if there is no prj.conf file located in a
user-specified APPLICATION_CONFIG_DIR, which otherwise would have
used an empty configuration and not included board-specific files.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This commit provides a number of helper macros for verifying arguments
passing to function:
- zephyr_check_flags_required
- zephyr_check_arguments_required
- zephyr_check_arguments_required_all
- zephyr_check_flags_exclusive
- zephyr_check_arguments_exclusive
which facilitates checking whether a required argument or flag has been
given or if mutual exclusive arguments are given.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit extends the Zephyr module yaml scheme with additional
entries for sysbuild in the build section.
This allows for Zephyr modules to extend the sysbuild infrastructure
by providing additional CMake and Kconfig files to be included in
sysbuild.
The new settings are:
build:
sysbuild-cmake: <path>
sysbuild-kconfig: <path>/<file>
sysbuild-ext: <true>|<false>
sysbuild-kconfig-ext: <true>|<false>
those settings follow the same pattern as the equivalent Zephyr build
settings but are processed by sysbuild.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Rename internals variables to lower case to distinguish those
variables from variables intended to be globally available.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Different users of the Zephyr CMake package may have different minimum
required versions of west. One important in-tree example is the
documentation, which must either be built with the latest version of
west, or with no west installed at all.
Make the MIN_WEST_VERSION variable configurable to support use cases
like this.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fixes: #55490
Follow-up: #53124
Prefix local version of the return variable before calling
`zephyr_check_compiler_flag_hardcoded()`.
This ensures that there will never be any naming collision between named
return argument and the variable name used in later functions when
PARENT_SCOPE is used.
The issue #55490 provided description of situation where the double
de-referencing was not working correctly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This improves the version checking for the zephyr SDK by searching
for newer versions that the version that was detected. This works
around the issue whereby the versions are contained in files with
MD5 hashes which might be in any order.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Follow-up: #53124
The PR#53124 fixed an issue where the variable `check` was not properly
dereferenced into the correct variable name for return value storage.
This was corrected in 04a27651ea.
However, some code was passing a return argument as:
`zephyr_check_compiler_flag(... ${check})`
but checking the result like:
`if(${check})`
thus relying on a faulty behavior of code updating `check` and not the
`${check}` variable.
Fix this by updating to use `${${check}}` as that will point to the
correct return value.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #53124
Fix de-referencing of check and exists function arguments by correctly
de-referencing the argument references using `${<var>}`.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The toolchain support was developed and tested against arm clang
version 6.17. So add a check to ensure we are utilizing 6.17 or
newer.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Improve comments, rearrange variable definitions to better match the
control flow of the module, and avoid nesting by adding a return()
statement.
No functional changes expected.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The oneApi support has bit rotten since it was first introduced. Update
the support to function with the latest 2023.0.0 release and add a
check to only support that version or newer for now. Versions before
2021.2.0 have linker script failures.
Various fixes made:
* In the 2023.0.0 release, various binaries are in a llvm-bin path so
add support to search in that path. This replaces the python search
path that much older versions needed.
* newlib isn't supported with oneApi so set TOOLCHAIN_HAS_NEWLIB to
OFF to match that.
* 2023.0.0 doesn't back llvm-nm, so use binutils version. This
is expected to be fixed in 2023.1.0 release so add a check to
handle either case.
* Update compiler flag check based on clang to also support
CMAKE_C_COMPILER_ID of "IntelLLVM" as that is how the oneApi toolchain
reports itself.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Deprecate old sparse support as Zephyr now provides a proper
infrastructure for SCA tools. Set ZEPHYR_SCA_VARIANT to sparse if user
is using deprecated way.
This allows to cleanup sparse code in various places and thus have a
cleaner build system.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Static code analyser (SCA) tools are important in software development.
CMake offers built-in support for some tools, such as cppcheck and
clang-tidy.
Other tools, such as sparse, are not directly supported.
This commit provides a uniform way for users to specify a supported
SCA using `ZEPHYR_SCA_VARIANT=<tool>` which is consistent with how
toolchains are specified.
ZEPHYR_SCA_VARIANT can be set using `-D` or in environment.
Support for an SCA tool is done in `cmake/sca/<tool>/sca.cmake`.
SCA_ROOT can be used to specify additional search paths when looking up
implementation for a tool. SCA_ROOT can also be specified in
`zephyr/module.yml` as setting. This makes it possible to provide SCA
tool implementation as part of a Zephyr module.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Update API for zephyr_code_relocate to support cmake generator expressions,
as well as relocating libraries.
zephyr_code_relocate can now accept a target name to the LIBRARY argument,
which will be converted into a set of source files from that
target to relocate.
Alternatively, files can be passed as a space separated list
or CMake generator expression. This allows users more
flexibility when relocating files. Glob matching functionality is still
available, although the preferred method to do this would now be:
file(GLOB relocate_sources "src/*.c")
zephyr_code_relocate(FILES ${relocate_sources} LOCATION <location>)
Note! This commit breaks support for zephyr_code_relocate until in tree
usages of the API are updated to the new format.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This commit updates all in-tree code to use `CONFIG_CPP` instead of
`CONFIG_CPLUSPLUS`, which is now deprecated.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
Fixes: #53696
Create a BOARD_REVISION_CONFIG setting to be consistent with the
BOARD_DEFCONFIG setting.
This allows systems which re-uses the Kconfig module to overrule the
file to be used as BOARD_REVISION_CONFIG in same way as is done for
the BOARD_DEFCONFIG file.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The boards, shields, and zephyr_module CMake modules have some issues
in their comments that can be trivially fixed up.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Different CMake versions can have very subtle differences, for
instance CMake 3.21 links object files in a different order compared
to CMake 3.20; this produces different binaries.
CMAKE_VERSION is required information to track binary differences
between two build systems.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
- Fix commit b2520b09a7 ("devicetree:
drop support for dts_fixup.h files"), which removed support for
shield-related fixups but forgot to update the module-level
documentation comment.
- Fix commit 61453e4a58 ("cmake: Zephyr
CMake package and CMake modules"), which contained some
BOARD-related copy/paste errors and omitted documentation for
the SHIELD_DIRS output variable (this is used in the dts
cmake module, so it's part of the shield module's contract)
- Add some other clarifying remarks and comments
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The table of contents at the top of the file has 'Devicetree
extensions' as the name of the section containing... those things.
The actual place in the file where they are defined has a different
title, though, defeating searching in the file for that section name.
Fix it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
"Populate" is ambiguous here: does that mean set, or append? The
answer is "append", so use that to be clearer. Be extra clear where
we're looking in as well.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
PR#51049 deprecated SOURCES but placed it below the
Deprecated_FIND_COMPONENTS check causing following message to be printed
when building for the unit_testing board:
-- The following deprecated component(s) could not be found: SOURCES
Fix this by placing the deprecated SOURCES handling at proper location
and append SOURCES to Deprecated_FIND_COMPONENTS list.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Some missing features for getting coverage data for unit tests:
- Setting the unit_testing board to have coverage support and native
application.
- Fixing the CONFIG_COVERAGE check
Signed-off-by: Yuval Peress <peress@google.com>
When building with clang, the unittests were giving us an error:
```
error: undefined symbol: llvm_gcda_start_file
```
This seems to be from linking in `gcov` regardless of the toolchain.
It appears that clang doesn't need any special library for coverage.
With this change the following now produce identical coverage reports:
```
$ ZEPHYR_TOOLCHAIN_VARIANT=zephyr ./scripts/twister -p unit_testing \
--coverage -i -T tests/unit/intmath/
$ ZEPHYR_TOOLCHAIN_VARIANT=host ./scripts/twister -p unit_testing \
--coverage -i -T tests/unit/intmath/
$ ZEPHYR_TOOLCHAIN_VARIANT=llvm ./scripts/twister -p unit_testing \
--coverage -i --coverage-tool lcov \
--gcov-tool $(pwd)/scripts/utils/llvm-gcov.sh \
-T tests/unit/intmath/
```
Signed-off-by: Yuval Peress <peress@google.com>
The `xtools` toolchain variant (aka. Crosstool-NG) was originally
introduced to be used with the Crosstool-NG-based Zephyr SDK
toolchains (i.e. sdk-ng).
This is no longer necessary because the current Zephyr SDK (sdk-ng)
already has its own `zephyr` toolchain variant, which fully replaces
the `xtools` toolchain variant, and the `xtools` toolchain variant
serves no purpose at all.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
Load image kconfig setting into image target properties.
This allows sysbuild to evaluate and check image configuration as part
of CMake invocation.
sysbuild_get() is updated to support reading of CMake cache or Kconfig
settings for an image.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The signature of import_kconfig() take two mandatory arguments and one
optional:
> import_kconfig(<prefix> <kconfig_fragment> [<keys>])
but has been implemented in such a way that it loops all arguments after
the two mandatory args and sets the same list on those.
Fix this error by only setting the created variables on the third and
optional argument if it exists.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
If users set SOURCES before find_package for unit tests, we'll warn them
that this code path will no longer be supported and provide the correct
way of doing things moving forward.
Signed-off-by: Yuval Peress <peress@google.com>
Downstream it's easier to write tests that use target_sources after
including the unittest package instead of specifying a list of sources
before. But if we do that, currently, main.c is added and the build
breaks because it doesn't exist.
Signed-off-by: Yuval Peress <peress@google.com>
Introduce a `test_sysbuild()` function.
This function is intended to be used by samples that are dependent on
sysbuild. This function allows such samples to test if sysbuild was used
in the build process, and when sysbuild is not used, then print a
warning to the user, or even fail the build.
This is useful for samples that have two parts to function properly, for
example samples that needs to be build and flash on two or more cores.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit introduces the possibility of a sample to locate
configuration files for extra images that are used when building with
MCUboot.
This allows use-cases where a sample, A, want to include MCUboot but has
adjustments to the default MCUboot configuration.
By adding a Kconfig fragment `<sample>/sysbuild/mcuboot.conf`, then that
fragment will be used together with the default configuration for
MCUboot.
It is also possible to completely replace the MCUboot configuration.
This is done by creating `<sample>/sysbuild/mcuboot/` folder.
This folder will then be used as the `APPLICATION_CONFIG_DIR` when
building MCUboot.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Support referencing module directories by name in CONF_FILE,
OVERLAY_CONFIG, and DTC_OVERLAY_FILE so that projects can reference
overlay files in arbitrary modules.
Verified by passing all the following tests:
./scripts/twister -T tests/cmake/overlays/
Fixes#41830
Signed-off-by: Gregory Shue <gregory.shue@legrand.us>
Fixes: #45270
Zephyr Kconfig defines the settings BIG_ENDIAN.
Propagate this setting to the corresponding CMAKE_C_BYTE_ORDER and
CMAKE_CXX_BYTE_ORDER variables.
This also ensures that the CMake function 'is_big_endian()' reports the
correct endianess.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #49116
During development of out-of-tree boards and applications it is not
uncommon to refactor / restructure code.
To allow developers more freedom, let's check that board's defconfig
still exists during a CMake re-run.
If the defconfig no longer exists, either because it's been moved or
deleted, then warn the user and set BOARD_DIR to NOTFOUND.
The NOTFOUND will request CMake to search for the new location in all
board roots. If the board has not been found, as example it's deleted,
then the existing error is printed later.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #47588
Kitware decided to fail compiler tests of single options if the
compiler reported only a warning and not an error:
github.com/Kitware/CMake/commit/f745e0497ee71d35fd1b3524b1636a72da76c266
which affects CMake 3.23.0 and 3.23.1
This change was later reverted in CMake >=3.23.2 and >=3.24.0
github.com/Kitware/CMake/commit/4941887d7defecb3016d2bd94d3a45754251ca56
Although the immediate issue is related to CMake, and has been fixed
reverted in later releases, then it still makes sense to be able to
group compiler options together that generally are depending on each
other to function correctly.
This commit introduces the possibility to group compiler options which
must be tested together.
It uses same approach as
> add_compile_options("SHELL:<option1> <option2> ...")
Usage:
> check_set_compiler_property(PROPERTY <property>
> "SHELL:<option1> <option2> ..."
> )
Will test the option together.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Creating a test_interface allows more complex unittest projects to
create additional libraries, for example mock libs, that can be re-used
between test projects.
To support the possibility of such libs to build with same flags as the
testbinary the test_interface is now populated with the public compile
and include flags from testbinary.
testbinary has been updated to use test_interface.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The current deprecation warning could give the impression that
CROSS_COMPILE is deprecated, which is not the case.
Instead it is the behavior of defaulting to `cross-compile` when
setting CROSS_COMPILE in environment without setting
ZEPHYR_TOOLCHAIN_VARIANT that is deprecated.
Not the use of `CROSS_COMPILE` setting itself.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The use of `separate_arguments()` in extra_flags.cmake and
unittest.cmake prevents the use of proper CMake lists.
A CMake list can be specified on command line as:
`-DMY_LIST="itemA;itemB;itemC"`
Users are expected to be able to provide extra compile flags using CMake
lists, like `-DEXTRA_CFLAGS="--flag1;--flag2"` but also using space
separated lists, like: `-DEXTRA_CFLAGS="--flag1 --flag2"`.
However, the way FLAGS was passed to separate_arguments() would result
in a list being treated as extra arguments to the function and thus
result in a CMake error.
To allow the use of CMake lists, the length of the argument as a CMake
list is tested. This ensures that when the argument contains a
single `;` then the length is >1 and no conversion is needed.
This allows a user to freely choose between the two forms:
- `-DFLAGS="--flag1 --flag2"`
- `-DFLAGS="--flag1;--flag2"`
or when passing flags which themselves contains spaces, like:
- `-DFLAGS="--flag1 \"val1 val2\""`
- `-DFLAGS="--flag1;val1 val2"`
Note that the extra escaped qouting is no longer needed for proper CMake
lists as the `;` itself informs the system that spaces are to be kept as
spaces.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Enhance sysbuild controlled configurations.
The current scheme of passing settings using `-D` on the CMake
invocation is vulnerable to quoting and lists.
With `zephyr_get()` in place as a uniform way of handling user
controlled settings (CMake cache / environment / CMake local variable)
we have a mechanism in place for a cleaner handling of sysbuild
controlled settings.
This improves the robustness of variable passing and add the same cleans
up and simplifies the logic in sysbuild.
The Kconfig Zephyr CMake module has been updated accordingly so that
CONFIG settings are taken from the sysbuild shadow cache when sysbuild
is used as higher level build system.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #40389
This commit aligns the use of the following Zephyr build variables:
- CONF_FILE
- DTC_OVERLAY_FILE
- OVERLAY_CONFIG
- WEST_DIR
- ZEPHYR_BOARD_ALIASES
- ZEPHYR_EXTRA_MODULES
- ZEPHYR_MODULES
so that they can be set in same manner and with same order of
preference.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
A cache variable specified by the user as `-DVAR=value` will have the
type UNINITIALIZED in the CMake cache.
Later CMake re-runs will execute the line:
set(${variable} ${CACHED_${variable}} CACHE STRING
"Selected ${variable_text}" FORCE)
This will update the cache type from UNINITIALIZED to STRING and thus
may be picked up by other tools as a change.
To ensure the type is initialized to string, this is added:
set(${variable} ${${variable}} CACHE STRING "Selected ${variable_text}")
This code will not change the value of an existing CMake cache variable
because there is no FORCE, but what it will do is to update the cache
variable type to STRING.
As part of this, include the existing parent scope setting of variable
inside the `if(DEFINED ...)` as there is no reason to clear a variable
there is not having a value.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #40389
Update toolchain handling to use zephyr_get() to ensure consistent
handling of CMake cache variables, environment variable, and CMake
local variables.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #40389
This commit implements zephyr_get(<variable>).
The purpose of zephyr_get(<variable>) is to ensure a uniform way to
handle variables which can be defined as:
- CMake cache variable, for example `-D<var>=<value>`.
- Environment variable
- Locally in CMakeLists.txt file before `find_package(Zephyr)`
It furthermore ensures that if an environment setting hides a local
setting then a warning is printed.
using
zephyr_get(<var>)
removes the need for constructs like:
set_ifndef(<var> "$ENV{<var>}")
set(<var> ${<var>} CACHE PATH "")
if(NOT DEFINED <var>)
set(<var> $ENV{<var>})
endif()
if (NOT DEFINED ENV{<var>})
message(FATAL_ERROR <error>)
endif()
and also ensures identical preference order for variables used in Zephyr
1. cache
2. environment
3. local scope var
It also ensures the variables supported through environment can also be
set using `-D<var>=<value>`
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Place vector sections after ROM_START sections.
Also add init.ld script that will prevent overlapping .init sections
in telink_b91 SoC.
Fixes#49036.
Signed-off-by: Mateusz Sierszulski <msierszulski@antmicro.com>
Follow-up: #49672
Zephyr SDK and host tools detection was reworked in #49672.
That rework accidentally changed the lookup order from:
- Zephyr SDK
- Other host tools
- Generic (host) C compiler
into
- Other host tools
- Zephyr SDK
- Generic (host) C compiler
this causes host tools shipped with Zephyr SDK, such as openocd to not
be discovered unless in path.
Restore the original order so that Zephyr SDK is located first so that
host tools from the SDK can be found without having them in path.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Move deprecated XCC_USE_CLANG setting to deprecated module.
Deprecated and move the use of CROSS_COMPILE to deprecated module as we
have had ZEPHYR_TOOLCHAIN_VARIANT==cross-compile for a long time.
Deprecated code is now loaded with a single line:
> find_package(Deprecated COMPONENTS XCC_USE_CLANG CROSS_COMPILE)
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The deprecated CMake module allows Zephyr to move deprecated code to a
centralized location from where it's both easy to get an overview of
deprecated code, and remove the code when it has been deprecated long
enough.
It further improve existing code, as the real CMake code now can be
changed from n-lines of deprecated code into a single line of the form:
find_package(Deprecated COMPONENTS <deprecated_name>)
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Follow-up: #41301
This commit is a rework and cleanup of the target toolchain handling in
Zephyr CMake build system.
Instead of directly loading code a CMake modules for target toolchain
lookup, the target toolchain now follows the CMake `find_package()`
pattern for finding the target toolchain.
This makes it more clear which modules are responsible for finding tools
and which modules provides build integration / features.
The following tools can now be found using `find_package()`:
- Target toolchain: find_package(TargetTools)
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Follow-up: #41301
This commit is a rework and cleanup of the tools handling in Zephyr
CMake build system.
Instead of directly loading code a CMake modules for tool lookup, the
host tools now follows the CMake `find_package()` pattern for finding
programs / tools in module mode.
This makes it more clear which modules are responsible for finding tools
and which modules provides build integration / features.
The following tools can now be found using `find_package()`:
- Zephyr-sdk : find_package(Zephyr-sdk <version>)
- Generic host tools: find_package(HostTools)
This further allows us to decouple the `verify-toolchain` CMake script
part required by `twister` into a tool lookup module and a dedicated
CMake script which utilizes the lookup module.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Removing Zephyr-SDK code for searching and printing messages when Zephyr
SDK is not found in the system.
After Zephyr SDK has been made available on all platforms, including
MacOS and Windows, then `find_package(Zephyr-sdk)` is always invoked
and thus either `find_package(Zephyr-sdk)` will fail or
ZEPHYR_TOOLCHAIN_VARIANT will be defined.
Meaning the removed code block in this commit can no longer be reached.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Cleanup CMake code by moving devicetree compiler detection to dedicated
FindDtc.cmake module.
This allows us to re-use existing CMake find_package() functionality in
module mode and thus reduce CMake logic.
It further has the benefit of being able to directly specify dtc version
like this:
> find_package(Dtc 1.4.6)
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This moves the test of compile flags set in environment from generic
toolchain to top-level ${ZEPHYR_BASE}/CMakeLists.txt.
In order to cleanup and make Zephyr CMake modules more generic then
the testing of specific compile flags and warn user is not really a
toolchain module responsible but a implementation detail of the project
itself as to how compile flags should be applied in a project.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit sets the minimum required Zephyr SDK version to 0.15, which
is required to build the current Zephyr codebase due to the following
breaking changes:
* RISC-V ISA spec change to 20191213 requiring the Zicsr and Zifencei
extensions to be specified to the `-march` flag
* ARC64 output format name change to `elf64-littlearc64`
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This PR allows the user to add symbols to the nocache
section. The use for this could be as follows
zephyr_linker_sources_ifdef(CONFIG_NOCACHE_MEMORY
NOCACHE_SECTION
nocache.ld
)
nocache.ld (as shown below) can define additional
symbols to go into the nocache section
. = ALIGN(4);
KEEP(*(NonCacheable))
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Fixes: #48950
Kconfig requires quoted strings in its configuration files, like this:
> CONFIG_A_STRING="foo bar"
But CMake requires expects that strings are without additional qoutes,
and therefore qoutes are stripped when loading Kconfig config filers
into CMake.
This is particular important when the string in Kconfig is a path to a
file. In this case, not stripping the quotes leads to an error as the
file cannot be found.
When users pass a string to Kconfig through CMake, they are expected to
pass it so that qoutes are correct seen from Kconfig, that is:
> cmake -DCONFIG_A_STRING=\"foo bar\"
In CMake, those qoutes are written as-is to Kconfig extra config file,
and then removed in the CMake cache.
After Kconfig processing, the Kconfig settings are read back to CMake
but without quotes. Settings that was passed through the CMake cache,
for example using `-D` are written back to the cache, but this time
without the qoutes. This results in Kconfig errors on sub-sequent CMake
runs.
Instead of writing the Kconfig value setting back to the CMake cache,
introduce an internal shadow symbol in the cache prefixed with `CLI_`.
This allows the CMake cache to keep the value correctly formatted for
Kconfig extra config creation, while at the same time keep existing
behavior for CONFIG_ symbols read from Kconfig.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Given that 3.6 is now several years old and the current and previous
Ubuntu LTS ship with 3.8 or later, upgrade the minimum required Python
version from 3.6 to 3.8.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit introduces a dedicated unit testing board.
Today, a dedicated Zephyr unit testing scheme exists but is different
from how a Zephyr build generally works.
For example Kconfig is not possible, resulting on various different
hacks to pass Kconfig settings from test cases / testcase.yaml through
CMake to the code.
Some directly as compile definitions, some as header files with forced
inclusion on sources, some with wrapper flags which again results in
different define being enabled. There is even cases where a second
forced header inclusion undefines previous defines.
Unit test often does a manual check for the right boards, like this:
> if (NOT BOARD STREQUAL unit_testing)
> message(FATAL_ERROR "This project can only be used with...")
> endif()
Introducing a dedicated unit_testing board under `tests/root` allows
us to use Kconfig in unit test samples, and thus proper `prj.conf` and
extra Kconfig fragments.
Generation of autoconf.h so the overall architecture follows regular
Zephyr builds.
Proper and uniform error messages when invalid board is selected.
The unit_testing board and arch is located under: `subsys/testsuite` so
that it is only available when find_package(Zephyr COMPONENTS unittest)
is used, and not available for regular Zephyr builds.
Kconfig generates autoconf.h which is applied as compile flag to
test binary which means that kconfig defines placed in ztest.h can now
be removed.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The Zephyr CMake module kconfig.cmake will create files inside
KCONFIG_BINARY_DIR.
In a default Zephyr build setup, this directory is created by Zephyr
CMake module zephyr_module.cmake. But Zephyr CMake modules are modular
and thus it must be possible to use kconfig module without
zephyr_module.
Thus kconfig.cmake must set and create KCONFIG_BINARY_DIR if it does not
already exists.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Remove ZEPHYR_BASE as default root in list_boards.py.
This allows list_boards.py to be used to only print boards at given
root(s) without printing Zephyr default boards.
Secondly it remove the need in list_boards.py to have any knowledge of
ZEPHYR_BASE.
The `west boards` command already has ZEPHYR_BASE knowledge and can
easily add ZEPHYR_BASE to the list of roots it is already constructing,
thus removing the need for knowing that ZEPHYR_BASE is always added.
Update boards.cmake to pass ZEPHYR_BASE as an additional arch root, as
arch.cmake has not yet been processed,which means ZEPHYR_BASE is missing
in ARCH_ROOT list at this point in time.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This reverts commit 87c6789355, restoring
commit 3b341085a2.
Restore the original change now that the underlying issue has been fixed
in 6cfb18686e.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Because the fixup files do not exist anymore, stop using "unfixed"
naming in favor of "generated".
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Devicetree fixup files existed previous to the current stable Devicetree
API. While they served their purpose, they are no longer necessary nor
used in-tree. This patch drops support for this legacy feature.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This file is no longer used by device.h, so let's avoid spending time
generating the content formerly in it.
In order to leave a pointer in place for users who are expecting to
see it or are pulling it into their own builds, however, replace its
contents with an #error directive that tells them what happened. This
can be removed later on when we expect people are used to the
transition.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
ZEPHYR_SDK_INSTALL_DIR is set from the env if it is not passed
explicitly to cmake, but one usage was reading directly from the env,
not allowing passing the var to cmake instead.
Change find_package of Zephyr-sdk to read from cmake var not env var.
Signed-off-by: Jeremy Bettis <jbettis@google.com>
This commit allows a project to specify a given set of Kconfig targets
prior to sourcing kconfig.cmake.
This allows for greater flexibility when re-using kconfig.cmake in
other projects.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit allows for specifying a dedicated Kconfig namespace, for
example: <namespace>_CONFIG
This namespace will then be used for handling loading of configuration
files into CMake configure scope, as well as handling of CMake cache
variables when set using `-D<namespace>_CONFIG_<var>=<value>`.
This allows greater flexibility when re-using the cmake/kconfig.cmake
in other projects.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Allow build system to define an alternative defconfig file.
This allows reusing the existing kconfig.cmake file in other projects,
such as multi image builds.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Introduce a generated Kconfig.dts that sets a Kconfig symbol for
every compatible.
* We set DT_HAS_<compat>_ENABLED if the devicetree has a node with
<compat> enabled. (status is okay...)
We can then use the Kconfig symbol in driver Kconfig to determine
if the driver should be available, and thus enabled by default.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move scripts needed by the build system and not designed to be run
individually or standalone into the build subfolder.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move scripts needed by the build system and not designed to be run
individually or standalone into the build subfolder.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Optional way for generating symbols file using binutils. This file will
be generated on demand for tests which will then be parsed by twister to
create an accurate test plan from the listed testcase/suites.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
DTS directories can come from multiple places. Some places like a user's
CMakeLists.txt can preserve symbolic links. Others like
`scripts/zephyr_module.py --settings-out` resolve symbolic
links.
list(REMOVE_DUPLICATES ...) does not know anything about directories;
only about strings. To fix it the de-duplication, resolve all symbolic
links in DTS_ROOT first using file(REAL_PATH ...).
Fixes this somewhat confusing error:
```
-- Found BOARD.dts: /home/proj/mymodule/boards/myboard/myboard.dts
devicetree error: both /home/proj/mymodule/dts/bindings/intel,stuff.yaml
and /disk1/home/proj/mymodule/dts/bindings/intel,stuff.yaml
have 'compatible: intel,stuff'
```
Also, print `gen_defines.py` arguments in case of an error so anyone can
see what failed and not just west+CMake experts.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
zephyr_library_compile_options() was attempting to create
unique hashes for compile options in order to prevent creating
them multiple times. However, it was only using the first
argument to create the hash, so if multiple libraries had
different compile options but the first line was the same,
the second set would be mistaken for the first set and would
actually be passed the first set during compilation instead
of its own set.
The fix should be to use the entire compile options argument
list to create the hash so they should only match if the entire
options list is exactly the same.
This is a continued fix for #43835
Signed-off-by: Nicholas Lowell <nlowell@lexmark.com>
Update the new API to use K_USER as the flags for both
CONFIG_USERSPACE and CONFIG_TEST_USERSPACE. Also, fix the linker
script to properly include the suites, tests, and rules.
Fixes#44108
Signed-off-by: Yuval Peress <peress@google.com>
The ztest unittest module relies on some headers that fake the real
ones, e.g. <zephyr/arch/cpu.h>. When new header location was introduced,
their path was not updates. This patch fixes this problem and provides
ztest with both, legacy and new include paths so that it can keep
working on both scenarios.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Update the new API to use K_USER as the flags for both
CONFIG_USERSPACE and CONFIG_TEST_USERSPACE. Also, fix the linker
script to properly include the suites, tests, and rules.
Fixes#44108
Signed-off-by: Yuval Peress <peress@google.com>
This PR allows the user to add symbols to the ramfunc
section. The use for this could be as follows:
zephyr_linker_sources_ifdef(CONFIG_ARCH_HAS_RAMFUNC_SUPPORT
RAMFUNC_SECTION
quick_access_code.ld
)
quick_access_code.ld (as shown below) can define additional
symbols to go into the ramfunc section
. = ALIGN(4);
KEEP(*(CodeQuickAccess))
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Propagate the board revision to Kconfig via the environment.
This is useful for application code to have access to for similar
reasons that CONFIG_BOARD is useful.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add a Kconfig to disable non prefixed includes. By setting
`CONFIG_LEGACY_INCLUDE_PATH=n` developers can disable having
`include/zephyr` in the search path. This means that includes such
as `#include <kernel.h>` will no longer work.
Internally, every header should be updated to add the `zephyr/`
prefix to the headers. Only then, will developers be able to use
this config value for their applications.
Signed-off-by: Yuval Peress <peress@google.com>
Move include paths and add new target_include_directories to support
backwards compatibility:
* /include -> /include/zephyr
example: <irq.h> -> <zephyr/irq.h>
Issue #41543
Signed-off-by: Yuval Peress <peress@google.com>
This patch is doing two things:
- it is removing the fallback on the path. This is not possible anymore
since the DT binding file is now actually requiring the
'zephyr,memory-region' property to be present from which the region
name is obtained.
- it is sanitizing the name when CONFIG_CMAKE_LINKER_GENERATOR is used
or not.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This commit updates the Zephyr build system to use the Zephyr SDK by
default for all host operating systems, when `ZEPHYR_TOOLCHAIN_VARIANT`
environment variable is not explicitly set.
Note that the Zephyr SDK is now available on all three major host
operating systems (i.e. Linux, macOS, Windows), and there is no reason
to exclude this behaviour for non-Linux hosts anymore.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
COPY/NOCOPY flag was added to the end of the string with ':'
as separators. The python script then split the line on ':'
which breaks on Windows build because the string was
[MEM]:[FILE]:[COPY]
In windows you will have 'c:\' in the file path so the
line.split() in script will split on the 'c:'.
Move the COPY/NOCOPY to:
[MEM]:[COPY/NOCOPY]:[FILE]
Note that the comments at top of gen_relocate_app.py also
indicates this format.
Fixes#43950
Signed-off-by: David Leach <david.leach@nxp.com>
Currently when a node has a 'zephyr,memory-region' compatible and a
'zephyr,memory-region' string property, a new memory region is created
in the linker script.
Having a memory region without a section to place variables in could be
not that useful. With this patch we extend the memory-region mechanism
to also create sections.
The user can then place variables in the sections as usual by using for
example the GCC attributes.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Fixes: #43835
In zephyr_library_compile_options() the existence of the compile
options interface library is checked and function returns if it already
exists. This results in #43835 meaning two libraries cannot add the
same option.
This commit fixes this by re-using the already created unique interface
library and link this to the Zephyr library.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Although CMake scripts already support duplicated module
names, if two modules with the same name provide different
Kconfig files, then both files will be loaded leading to
potential conflicts.
Modify zephyr_module.py to enforce that all modules are
uniquely named so that it is possbile to override some of
the built-in modules using ZEPHYR_EXTRA_MODULES variable.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Fixes: #43378
Move the exporting of ZEPHYR_TOOLCHAIN_VARIANT from the custom target to
the COMMON_KCONFIG_ENV_SETTINGS variable.
This ensures that the setting is exported both when running the initial
kconfiglib parsing but also on later menuconfig / guiconfig invocations.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
