It looks like all SoCs in tree check if an exception comes from an IRQ
the same way, so let's provide a common logic by default, still
customizable if the SoC selects RISCV_SOC_ISR_CHECK.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Instead of custom SOC_MCAUSE_EXP_MASK definition. Note that SoCs
selecting RISCV_PRIVILEGED already used such config indirectly (see
changes in soc_common.h).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The MCAUSE register has the "Interrupt" flag defined defined at XLEN-1
position (31 for 32-bit, 63 for 64-bit). This is not an SoC specific
option, and there's no need to expose it publicly.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
As defined in Table 3.6 of "The RISC-V Instruction Set Manual, Volume
II: Privileged Architecture". Delete all spread definitions of the same,
weirdly prefixed with "SOC".
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Adds common thread-local-storage.ld provided
by Zephyr. This also fixes a wrong xtensa_core entry
that should be riscv_core.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Reset cause reason was not initalized properly, making
hwinfo feature not to work as expected.
Fixes#65634
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This commit updates all riscv SoCs to set SOC_LINKER_SCRIPT CMake
variable to point to active linker script directly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
ESP32 flash_mmap() function requires `_rodata_reserved_start` address
to be at the beginning of RODATA. This allows adding memory-mapped flash
areas.
Fixes#52764
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Add the ESP32-C3-WROOM-02 modules with 4 or 8 MiB flash. The
temperature and antenna / connector variants are not mentioned
explicitely as they do not influence the software.
Signed-off-by: Detlev Zundel <dzu@member.fsf.org>
Flash segments require VMA to proper work. Executing from LMA
is not possible. Current implementation did not take into account
runtime iterable rom sections that any application could implement.
In the above cenario and as reported in the issue below, ESP32 won't run
when those ROM sections are created in application level.
This change make sure all flash segments are properly mapped
accordingly.
Fixes#61834
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Adjust the memory organization to avoid overlapping
critical regions from bootloaders (MCUboot and IDF)
Signed-off-by: Almir Okato <almir.okato@espressif.com>
Implement the sys_poweroff hook for all ESP32 SoCs based on the previous
SOFT_OFF implementation.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Refactor the ESP32 target SOCs together with
all related boards. Most braking changes includes:
- changing the CONFIG_SOC_ESP32* to refer to
the actual soc line (esp32,esp32s2,esp32s3,esp32c3)
- replacing CONFIG_SOC with the CONFIG_SOC_SERIES
- creating CONFIG_SOC_FAMILY_ESP32 to embrace all
the ESP32 across all used architectures
- introducing CONFIG_SOC_PART_NUMBER_* to
provide a SOC model config
- introducing the 'common' folder to hide all
commonly used configs and files.
- updating west.yml to reflect previous changes in hal
Signed-off-by: Marek Matej <marek.matej@espressif.com>
