This change allows to use SSD1306 based displays to be used on the
SPI bus as well.
Adding SPI shield.
Tested on SSD1306 and SSD1309 based displays using I2C.
Tested on SSD1309 based display using SPI.
Signed-off-by: Marco Peter <marco@peter-net.ch>
This change removes the interleaving control
frames.
Additionally all I2C accesses are centralized in
one single function.
Signed-off-by: Marco Peter <marco@peter-net.ch>
This CL adds more comments for each macro functions used for device tree
file for better explanations. It also changes all hex values in soc.c to
lower case.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
This CL contains the drivers of NPCX Host Sub-Modules that serve as an
interface between the Host and Core domains. For most of them, the Host
can configure these modules via eSPI(Peripheral Channel)/LPC by
accessing 'Configuration and Control register Set' which IO base address
is 0x4E as default. And the interrupts in core domain help handling any
events from host side.
In this commit, we introduced six host sub-modules. It includes:
1. Keyboard and Mouse Controller (KBC) interface.
2. Power Management (PM) channels.
3. Shared Memory mechanism (SHM).
4. Core Access to Host Modules (C2H).
5. Mobile System Wake-Up functions (MSWC).
6. Serial Port (Legacy UART)
The tasks in application layer such as 8042, ACPI and host command can
cooperation with this driver by connecting api or callback functions.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
In npcx7 series, all of them support the Intel Enhanced Serial
Peripheral Interface (eSPI) Revision 1.0. This specification provides a
path for migrating host sub-devices via LPC to a lower pin count, higher
bandwidth bus. In addition to Host communication via the peripheral
channel, it provides virtual wires support, out-of-band communication,
and device mastering option over the Chipset SPI flash.
Becisdes introducing eSPI device in npcx7, this CL also includes:
1. Add eSPI device tree declarations.
2. Add npcx7-espi-vws-map.dtsi to present the relationship between eSPI
Virtual-Wire signals, eSPI registers, and wake-up input sources.
3. Zephyr eSPI api implementation.
4, Add OOB (Out of Band tunneled SMBus) support.
5. Add configuration files for eSPI test suites.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
Fixed build error in in eSPI socketpair test suite since wrong function
name for eSPI flash channel api.
This CL also fixed [-Werror=unused-function] warning by adding inline
attribute in case someone includes "espi_utils.h" and doesn't call
espi_manage_callback() function.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
The power draw of this magnetometer is significant,
device power management is needed for our use-cases.
Signed-off-by: Emil Hammarstrom <emil.hammarstrom@assaabloy.com>
Change-Id: I71158e629e93b491c6d673aa81001b7a7099f654
On stm32f1 series, device pinctrl configuration could be modified
thanks to remapping capability.
Remapping allows to provide alternate pinctrl configuration to a
peripheral device and applies to all impacted pins.
So, specifically for stm32f1 series, apply remapping when required
before proceeding with pin configuration.
Additionally, because remapping is defined individually for each pin,
apply a function on pinctrl configuration to check remapping setting
coherency accorss pins.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Based on pinmux data encoded in dt bindings some stm32f1 post
processing is required to eventually fit into data structures
expected in gpio_stm32_configure function.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Provides tool set to be used by device drivers in order to be able
to configure device signals.
This does not involve the implementation of a dedicated pinctrl
driver. In this regard, this is equivalent to implementation used
for treatment of current pinmux.c files.
Since STM32F1 uses a different GPIO configuration scheme, its
support is exlcuded for now.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update stm32_pin_configure prototype to use more appropriate
unsigned arguments
Additionally, fix documentation for z_pinmux_stm32_set function
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Allow to reconfigure UART baudrate on ESP and on host MCU, so a
non-default baudrate can be used for communication. This option helps
for example to increase network bandwidth without touching ESP chip
firmware.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Add Kconfig options to configure modem command handler buffer size and
count. This will allow to fine tune those based on UART baudrate, system
load and available memory.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Add new Kconfig option to configure modem UART interface handler ring
buffer size. This will allow to lower ring buffer to save some resources
or increase it in case high network bandwidth is utilized (with high
UART baudrate).
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Remove Adafruit/Seeed TFT hardcoded settings. Note that undocumented
ILI9340/1 settings have been removed (maybe Seeed is using another ILI
variant?).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Move pixel format setting (RGB565/RGB888) to DeviceTree. Add support for
changing pixel format at runtime.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Multiple enhancements towards better code readability and consistency:
- sorted headers
- define and reference magic constants
- adjust some names
- add U suffix to unsigned constants
- move hw reset to a function
- remove non-needed initialization code from seeed tft
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Adds imx rt support.
Allows n-number of can interfaces based on device-tree.
Adds a "common" irq name.
Added CAN bus pins and dts for 1060 and 1064 EVK.
Signed-off-by: Rick Talbott <rtalbott@fastmail.com>
This enables support for the confgure and config_get functions in
the UART API, allowing users to change baudrate, parity, stop bits,
data bits and flow control in runtime.
Signed-off-by: Jesper Derander <jesper.derander@endian.se>
Add additional pinmux definitions for I2C1 and I2C2 that are used
on the stm32f030 series SoCs. Additionally, correct the PF0 and PF1 I2C
functions, which were swapped.
Signed-off-by: Brian Kubisiak <brian@kubisiak.com>
Reset rx byte counters when hw timer/counter is disabled.
Fixes issue where disabling and re-enabling async uart rx can produce
"UART_RX_RDY" events with invalid data when power management is used.
Signed-off-by: Audun Korneliussen <audun.korneliussen@nordicsemi.no>
The condition used to detect presence of optional devicetree
properties that specify read and write opcodes was inadvertently
changed to something that will never be true. Update the check and
the property extraction to restore the original behavior.
Fixes#28635.
Signed-off-by: Stephan Walter <stephan@walter.name>
The ce0cc3a7 commit (lsm6dsl: make the driver multi-instance) changes
all bus API signature, which now requires a "const struct device *dev"
and not a "struct lsm6dsl_data *data". By mistake the shub part was
left unchanged. Fix: #28565
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Algorithm for waiting for clock stabilization was failing in case when
it was waiting for clock availablity and clock was already available
before function was called. That is because nrfx_clock_is_running
was returning false because XTAL was already started but not yet
running.
Added a check for current LF source, if XTAL is picked that indicates
that RC is already running because of two stage startup procedure.
Added documentation of lfclk_spinwait with explanation of two stage
approach.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Initialize device pointer in driver's context.
It was not done quite right in commit a1708cf2f2
("drivers: ethernet: Fix device instance const qualifier loss"),
and then completely removed in commit 113d9274ea
("drivers: ethernet: remove stray expression")'
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This commit fixes the following issue:
When using slip without TAP, i.e. CONFIG_SLIP_TAP=n (default), while
another ethernet interface is enabled and sets CONFIG_NET_L2_ETHERNET=y.
This causes ethernet_init() to be wrongly called with struct dummy_api
instead of struct ethernet_api.
ethernet_init() expects struct ethernet_api (by cast), so we end up
with the get_capabilities field pointing to garbage!
Actually, as we are using the dummy api, we don't need to call
ethernet_init() at all.
Sole dependency on CONFIG_NET_L2_ETHERNET is wrong because it
can be enabled by another interface.
Signed-off-by: David Komel <a8961713@gmail.com>
Named choice is needed in order to be able to extend it
in other modules.
Closes: #28559
Signed-off-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@nordicsemi.no>
* Add missing the PINMUX macros for UART5 pins.
* Correct a typo in STM32F1_PINMUX_FUNC_PC5_ADC12_IN15; the macro
used PC4 instead of PC5 for ADC12_IN15.
Signed-off-by: Paul Fagerburg <pfagerburg@google.com>
HAS_DTS_I2C is now selected by I2C and
always used as I2C && HAS_DTS_I2C.
It could then be purely removed.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The correct return value is -ENOBUFS if we run out of network
buffers when sending the packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
