Without status line, watchdog is enabled by default. The desired
behaviour is to have it disabled and enable only when watchdog
is used, with overlay files. The same way how it is done for
samples/drivers/watchdog and tests/drivers/watchdog/wdt_basic_api.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Introduce CONFIG_BUILD_ALIGN_LMA. When enabled, this symbol will add a
padding section after the final read only data section in the image.
This padding section will ensure that the LMA of the data sections
follows the same alignment restrictions as the VMA does. This LMA alignment
is needed for objcopy to adjust the LMA address of the output ELF file.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add probe address setting to RT595-EVK, to work around board issue with
routing of INT GPIO that prevents GPIO from being set to output mode.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Rework the devicetree definition for smsc91x to put the mdio and
ethernet device at the same level, and make the phy a child of the mdio
node.
This allows matching up the device initialization sequence with the
devicetree hierarchy.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Move few variable inside a case statement to avoid build warning for
unused variables in some specific configuration.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This driver implements an MDIO device. Enable the MDIO driver to avoid a
build error for:
orphan section `._device.static.3_CONFIG_MDIO_INIT_PRIORITY_'
Also set the proper compatible in mdio_shell so that the ethernet tests
build correctly.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add a property that allows explicit selection of the differential
input mode for ADC channels in DTS. This is useful for controllers
that do not have configurable inputs, so the zephyr,negative-input
property that implicitly selects the differential mode is not
specified for them.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
In Linux, checkpatch.pl relies on the vendor-prefixes.yaml file
to validate manufacturers in compatible strings.
In addition to the vendors defined in vendor-prefixes.txt,
the YAML file includes expressions for "prefixes which are not vendors":
these expressions do NOT define special manufacturers that may appear
in compatible strings, and are never involved as such in DTS files.
We can rather see them as bulk-definitions of JSON/YAML properties
suitable for the dt-schema tools.
OTHO, in Zephyr, checkpatch.pl relies on the vendor-prefixes.txt file,
which does not include these additional prefixes, but edtlib.EDT adds
them as hard-coded special values.
This is confusing, if not incorrect:
- the fact that edtlib.EDT (and thus its client code in the
zephyr/scripts directory) actually allows these vendors
in compatible strings is buried in the source code
- checkpatch.pl (with vendor-prefixes.txt) in Zephyr behaves neither like
checkpatch.pl (with vendor-prefixes.yaml) in Linux, nor like edtlib.EDT
(with _VENDOR_PREFIX_ALLOWED)
- Zephyr should not treat these "prefixes which are not vendors" as
valid manufacturers in compatible strings to begin with
Signed-off-by: Christophe Dufaza <chris@openmarl.org>
Add myself as codeowner of the previously committed PWM
driver for the MAX31790.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Add myself as codeowner of the previously committed GPIO
expander driver for the PCAL64XXA.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Add myself as codeowner of the previously committed GPIO
expander driver for the BD8L600FS.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Add myself as codeowner of the previously committed ADC
driver for the ADS114S0X.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Add myself as codeowner of the previously committed SoC
STM32H735 and its disco board.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
A recent refactor of bt_audio_codec_cap to flat arrays missed setting
data_len and meta_len fields.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
Extend Codec capabilities of the server.
At Codec Config operation initiated autonomously by server, all ASEs
with lower IDs than the requested one have to be initated first due
to API limitation.
In some BAP/USR (server role) test cases the PTS sends the MMI 202
to configure the Sink ASE to streaming state, in some others it does not.
For now, let's autonomously send Receiver Start Ready at ASE Enabled.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
The reply callback doesn't need to handle the case when the
code of the reply is 'continue' (2.31). In that case the callback
is not executed until the last block is transmitted.
Signed-off-by: Lukas Woodtli <lukas.woodtli@husqvarnagroup.com>
When using block-wise transfer, call the reply callback only when
the last block arrived.
Signed-off-by: Lukas Woodtli <lukas.woodtli@husqvarnagroup.com>
Fix possible race conditions when state and results are written
by locking the registry, so a first write does not cause Notify
message to be send too early.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Rename the STM32H7 FDCAN node labels to match to naming used in the ST
reference manuals. This also matches the naming used in the STM32H7 FDCAN
clock and pinctrl macros.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename the STM32H7 FDCAN driver Kconfig symbol and implementation file to
match the naming used in the ST reference manuals.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename the STM32 FDCAN node labels to match to naming used in the ST
reference manuals. This also matches the naming used in the STM32 FDCAN
pinctrl macros.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename the STM32 FDCAN driver Kconfig symbol and implementation file to
match the naming used in the ST reference manuals.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename the STM32 bxCAN driver DTS compatible, Kconfig symbol, and
implementation file to match the naming used in the ST reference manuals.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Fold the contents of the private header for the STM32 bxCAN driver into the
implementation file.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The compile script was modified to fully parallelize
all bsim test images builds.
This speed up the build time, but as we are
building ~80 images, the average load on the system
will skyrocket to over 200.
For CI systems we are seeing in quite many cases,
the CI server loosing connection with the CI runner,
while this part of the job is run, and suspect it is
due to this load.
Nice the job down (by the default +10),
as this should alleviate this problem without slowing
down the job.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
When the protocol layer like TCP is blocking transmission, the socket
layer will attempt and wait for a maximum amount of time before returning
with an ENOBUFS error.
This change allows to set the maximum waiting time from the configuration
file instead of using a fixed 10 second value.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Qualification test CSIS/SR/SP/BV-03-C [Lock Timeout]
Specification: Coordinated Set Identification Service Revision v1.0.1
Section 5.3.1.1.
When the server and the client are not bonded and they disconnect when
the value of the Set Member Lock characteristic is set to Locked, the
server shall set the value of the Set Member Lock characteristic to
Unlocked immediately after the disconnection.
Signed-off-by: Henrik Eriksen <heri@demant.com>
Qualification test MICS/SR/SPE/BI-01-C [Invalid Mute Value]
Specification: Microphone Control Service Revision v1.0 Section 3.1.1
If the client writes a value of Disabled or RFU to the Mute
characteristic, the server shall return an ATT Error Response with the
ATT error code Value Not Allowed (0x13) as defined in Assigned Numbers.
Signed-off-by: Henrik Eriksen <heri@demant.com>
The timing_max parameters defined in the stm32 bxcan driver don't match the
register description in the reference manuals.
- sjw does have only 2 bits representing 1 to 4 tq.
- phase_seg1 and phase_seg2 max is one tq higher.
I have checked the following reference manuals and all match:
- RM0090: STM32F405, F415, F407, F417, F427, F437 AND F429
- RM0008: STM32F101, F102, F103, F105, F107 advanced arm-based mcus
- RM0351, RM0394: all STM32L4
- RM0091: all STM32F0 with CAN support
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
The API was never implemented.
The channel type can also be obtained using bt_iso_chan_get_info().
If we would have to implement this API, it would share a lot of the
implementation with bt_iso_chan_get_info().
Removing the API makes the ISO APIs more similar to the ACL APIs
where we don't have a special API to fetch the role.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
