When there is 4 way handshake timeout, it can be because of
incorrect credential or some times when AP's signal strength
is weak. It can cause 4 way handshake fail. Adding comment
where WIFI_STATUS_CONN_WRONG_PASSWORD is defined.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
There should be a particular defines which clarify the
use of that number. So, replacing numbers with defines
in wifi shell.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
Add test related to disable-suite-name-check flag
This flag disabling extended test suite name verification at
the beginning of Ztest test. This option could be useful for tests
or platforms, which from some reasons cannot print early logs.
Add test related disable-warnings-as-errors
Do not treat warning conditions as errors.
Signed-off-by: Artur Wilczak <arturx.wilczak@intel.com>
Based on the iis2dlpc driver, with some significant differences in
interrupt handling.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
The currently used PyYaml version has some vulnerabilies as
described on the pull request description. It updates to
version 6.0, removing these supply chain vulnerabily.
The OSSF Scorecard was the tool used for discovering
these vulnerabilties.
Signed-off-by: Javan lacerda <javanlacerda@google.com>
Select the LPTIM clock source STM32_LPTIM_CLOCK to be
LSE or LSI depending on the DTS clocks property
of the stm32_lp_tick_source node.
This will also affect the SYS_CLOCK_TICKS_PER_SEC
depending on the lptim prescaler
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add common gpio node to pinctrl node (interrupts are shared between ports)
and syscon for interrupt edge detection register in order to support
interrupts in rzt2m gpio
Signed-off-by: Jakub Michalski <jmichalski@internships.antmicro.com>
Add irqs to rzt2m gpio bindings in order to add interrupt support to rzt2m
gpio driver and adds common gpio node to store interrupt config (irqs are
shared between ports)
Signed-off-by: Jakub Michalski <jmichalski@internships.antmicro.com>
In future versions of Linkserver, specifying the core argument within
the device string will not be supported. Therefore, move the FRDM
MCXN947 board to specify the core directly instead of using the device
string.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
- fix schematic link pointing to different board
- fix link to the board_defconfig file
- remove the "Debug Firmware" link that was not referenced anywhere
- add a link to the board user manual
- minor additions to the debug with J-Link section
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Remove explicit timeouts which are either the same as the
default one or smaller.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's increase the timeout for a few tests whose
timeout is less than 3x a typical execution time in CI.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This test keeps its own partial way of running tests.
Let's have it kill stuck processes in the same way as
the rest (sending another kill 5 seconds after, and printing
a message about what happened)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add the invocation of an interrupt config function
(config->irq_config_func). Absence of this call results in the DMA
driver not being able to service interrupts raised by the DMA
peripheral.
This case was observed on the i.MX RT685's HiFi 4 DSP domain, where DMA
was not functional because of this.
Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>
The LL_EXTENSION_SYMBOL macro is used to export symbols defined in
extensions to the base image. This patch reworks the macro to use
`static const struct llext_const_symbol`, since:
- the associated values are semantically not modifiable;
- this exported symbol table is parsed by llext like section iterables,
ignoring associated symbol information.
This is mostly a cosmetic change because, unlike the base image, these
symbols cannot be placed (and left) in ROM as they will most certainly
require runtime relocation. However, it makes this macro more consistent
with EXPORT_SYMBOL, which is the base image equivalent.
Also clarify some comments in the same header file.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Outgoing block-transfers now set the socket hint
to ONGOING as long as the BLOCK1/BLOCK2 header has
MORE flag set to true.
This means as only the last packet in the block-transfer
set the socket hint to LAST or ONE_RESPONSE.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
To give an idea of which tests are taking
too long either on CI or locally.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add SoC initialization to set the UART RDC permission in the early
phase, so that the it can be used by Zephyr on Cortex-A cores.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Create regulator on GPIO for microphone supply
Set pdm data and clk pins in pinctrl
Add xiao_ble_sense overlay for dmic sample support
Signed-off-by: Zak Portnoy <zakportnoy@gmail.com>
Let find_program in codechecker/sca.cmake search for both 'CodeChecker'
and 'codechecker'. Before this change, I wasn't able to run CodeChecker
because cmake couldn't find it. (Ubuntu 23.10, CodeChecker 6.21.0 installed
via snap)
Signed-off-by: Benedikt Streicher <streicher.b@posteo.de>
Once Wi-Fi is associated few parameters like listen interval and
power-save mode cannot be changed. The state for association is
"ASSOCIATED" and not completed. Even after state transitions to
COMPLETE, it can still go back to other states, e.g., PTK/GTK renewal.
Fix the state check.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
To minimize time the CPU spends when preparing for sleep, make sure
the pending transactions are finished before calling `wfi`.
Signed-off-by: Marcin Szymczyk <marcin.szymczyk@nordicsemi.no>
If host is not reading RTT data (because there is no PC connection
or RTT reading application is not running on the host), thread will
stuck continuously trying to write to RTT. All threads with equal or
lower priority are blocked then. Adding detection of that case and
if host is not reading data for configurable period then data is
dropped until host accepts new data.
Similar solution is using in RTT logging backend.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Create the folder for the results if it does not exist.
Fixes these warnings in CI:
```
touch: cannot touch '/__w/zephyr/zephyr/./bsim_bt/
53_bsim_results.xml': No such file or directory
realpath: /__w/zephyr/zephyr/./bsim_bt/
53_bsim_results.xml: No such file or directory
```
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
ANSI color is great for viewing output in a terminal, but currently it
also gets written out to the `handler.log` file. Text editors usually
don't render these, resulting in a hard-to-read file with a lot of
gibberish interspered. This commit strips ANSI sequences from lines
before writing them to the handler log file. This change does not
affect what is printed in Twister's console output, so one would still
see the colors there.
Signed-off-by: Tristan Honscheid <honscheid@google.com>
All implementations of random number generator where duplicating logic
for sys_rand32_get. Since this subsystem already has a logic to
generate random values of arbitrary size, we can generically implement
sys_rand32_get on top of that.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Enable DMIC on RW612 BGA board. The DMIC is enabled for both onboard
MEMS microphones for this board, and the board is enabled with the DMIC
sample and test
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
