With this commit a dedicated APPLICATION_CONFIG_DIR is added to the
Zephyr build system.
Currently, the APPLICATION_SOURCE_DIR is identical also the base
location of configuration files.
This is very practical for simple samples, but also has it limitations
for more complex setups.
Introducing a dedicated APPLICATION_CONFIG_DIR allows users more
customization options in Zephyr build system.
Especially in terms of custom build configuration files unknown to
Zephyr itself.
For example, instead of all configuration files being located directly
in the application source folder, a project might prefer to organize
their configuration files on a per board basis, for example:
<app>/boards/custom_board_A/prj.conf
<app>/boards/custom_board_A/app.overlay
<app>/boards/custom_board_A/custom_file.mine
<app>/boards/custom_board_B/prj.conf
<app>/boards/custom_board_B/app.overlay
<app>/boards/custom_board_B/custom_file.mine
...
instead of n-files located in the root of the sample.
If the user / sample specifies APPLICATION_CONFIG_DIR, then this folder
will always be used instead of the default configuration folder.
As part of this extension the behaviour of
`-DCONF_FILE=<relative-path>/prj_<build>.conf` and additional Kconfig
fragments automatic sourcing has been aligned with the default behavior
of `prj.conf`.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Setting of DTC_OVERLAY_FILE as an environment setting was deprecated
before Zephyr 1.14 LTS.
This commit remove the support for this possibility and thus cleans up
the build system.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #38558
This commit removes: `cmake_policy(SET CMP0079 OLD)`
This means Zephyr will now allow the new CMP0079 behavior introduced
with CMake version 3.13.
Code has now been examined and no occurences has been found where the
INTERFACE keyword was used with `target_link_libraries()` outside the
CMakeLists.txt scope where the original libraries were created.
As an additional safeguard `./scripts/twister -c -N --cmake-only`
has been executed before and after this change and all `build.ninja`
files for each test / sample have been diffed.
Removing the CMP0079 policy creates identical build files, hence removal
of the old policy will not impact the build.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The `set_conf_file()` was deprecated in
6d4ba3490f
which is before Zephyr v1.14 LTS.
Let's remove the support now, before releasing a new LTS.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
With the change to cmake_minimum_required(VERSION 3.20.0) then this
commit is no longer needed.
This reverts commit 6ca2bf25cb.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
add .S file extension suffix into CMAKE_ASM_SOURCE_FILE_EXTENSIONS,
because clang from OneApi can't recongnize them as asm files on
windows, then they won't be added into build system.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
Fixes: #36185
CMake >=3.20 now supports relative paths in Ninja depfiles.
As Zephyr still supports the use of CMake 3.13, and the current use of
DEPFILE in linker/ld/target.cmake is already absolute path, then the
safest choice is to use old behavior.
This can be changed when Zephyr increases minimum required CMake to be
3.20 or newer.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #35890
The current implementation of Zephyr build configuration CMake package
only allows the build configuration package to be placed inside a
Zephyr workspace.
This commit extends the usability by allowing users to locate the
Zephyr build configuration CMake package outside the Zephyr workspace
and then refer to the package using
`-DZephyrBuildConfiguration_ROOT=<path>`
`set(ZephyrBuildConfiguration_ROOT <path>)`
This allows users greater flexibility in their workspace layouts.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Follow-up: #34842
This is a follow-up commit that ensures relevant version information
regarding the build is located together as discussed in #34842.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Today, there is a build target is added for each runner: flash, debug,
debugserver, attach.
And those runners will have a dependency to Zephyr logical target that
is built before invoking `west <runner>`.
This design has some flaws, mainly that additional dependencies directly
on the target will not be built when running `west <runner>` directly.
That generator expressions cannot be used for the DEPENDS argument.
Instead, the build target `<runner>` will not have any dependencies, and
will raise a build error if a dependency is added to the target.
Due to how `add_dependencies()` work, this must be done as a build time
check, and not configure time check.
`west <runner>` will invoke a build before executing the runner, and
this way ensure the build target is up-to-date, which again removes the
need for a dedicated `west_<runner>_target`.
It also minimizes the risk of developer errors, as developers no longer
need to consider the need for adding additional dependencies.
If a custom target is part of the default `all` build, then it's ensured
to be up-to-date.
Fixes: Issue reported on slack.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #33138
Board alias and deprecated board handling is setting the BOARD variable
after zephyr_boilerplate_watch(BOARD) has been executed.
This results in the board changed warning.
This commit moves the zephyr_boilerplate_watch(BOARD) code below the
board alias and deprecation handling.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Watching of specific Zephyr CMake build variables ensure users cannot
accidentally set important variables, such as BOARD, SHIELD, CONF_FILES
late in the build process.
This was also added to zephyr_check_cache() function.
However, the BOARD provided by the user may look as `<board>@<revision>`
and will be kept in the cache in that form.
However, the BOARD value from cache is spit into internal build
variables as: BOARD=<board> and BOARD_REVISION=<revision>.
However, this is done after `zephyr_check_cache()` which then triggers
the variable watch to trigger, and printing a warning when using board
revisions.
Therefore WATCH is now optional for `zephyr_check_cache()` and watch for
BOARD variable will be enabled when boilerplate has completed all board
handling.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
People frequently do things like setting BOARD_ROOT to
/my/module/boards/arm/my_board when it should be set to /my/module.
Similar misconfigurations happen for SOC_ROOT.
Emit warnings in these situations to try to point users in the right
direction.
A similar change could be made for DTS_ROOT, but that is trickier
since at least one directory (the application root) is legitimately
added to it that does not always contain dts/ or include/
subdirectories.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fixes: #32269
This commit is a followup to #31877 where the `${shield_dir}/${s_dir}`
was adjusted to `${SHIELD_DIR_${s}}` to ensure only including shields
and not boards in list of known shields.
An `if(EXISTS ${shield_dir}/${s_dir}...)` was missed in this process
which causes #32269. This is corrected in this commit.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Several variables must be set by the time boilerplate.cmake is run.
This includes BOARD, SHIELD, CONF_FILE, and DTC_OVERLAY_FILE.
It's not always clear to users that this is the case, and we sometimes
see attempts to modify these variables in app CMakeLists.txt files
after find_package(Zephyr ...) lines, where they will have no effect.
This causes confusion.
Add a new extension function, zephyr_boilerplate_watch(), which traps
attempts to set these variables and prints a noisy warning. Use it
from boilerplate.cmake on the variables mentioned above.
This will hopefully make it clearer at build time why the changes are
being ignored.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add ability to build a UF2 (https://github.com/Microsoft/uf2)
image as an additional output type. This leverages the code
partition offset for the UF2 base address, and a configurable
UF2 family ID.
Includes an unmodified (except for headers for licensing, pylit
disabling) version of the uf2conv.py script copied the UF2
format specification repository, used to convert the bin to UF2.
Origin: UF2 file format specification reference utilies
License: MIT
URL: https://github.com/microsoft/uf2/blob/master/utils/uf2conv.py
commit: 587abb8b909266e9b468d6284f2fbd425235d1b5
Signed-off-by: Pete Johanson <peter@peterjohanson.com>
The following two lines are duplicated in boilerplate.cmake
```
zephyr_file(APPLICATION_ROOT BOARD_ROOT)
list(APPEND BOARD_ROOT ${ZEPHYR_BASE})
```
This commit removes one set of the duplicated lines.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #30713
Now using the common script `verify-toolchain.cmake` for verifying
toolchain settings.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #26522
Now searching for Kconfig.shield instead of recursively looking for
overlay files.
Globbing recursively for overlay files also picks up board overlays,
which leads to errors in the shield handling, as user could wrongly
specify certain boards as shields.
Also it led to wrongly list some board as shields, as reported
in #26522.
The folder containing a Kconfig.shield is then used when looking up
overlay files, as all overlay files in that folder represents a shield.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This is a follow-up to commit 77ecd6837d.
Add missing check that looks for a revision specific overlay located
in the `<app>/boards/` directory similar to how overlays and Kconfig
fragments are handled.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Calling cmake/pristine.cmake now requires SOURCE_DIR and BINARY_DIR as
arguments.
This ensures that pristine.cmake can evaluate if pristine is requested
on in-source builds, and bail out in such case with an error message.
All uses of `pristine.cmake` has been updated to use the new arguments.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit introduces MODULE_EXT_ROOT which allows CMake and Kconfig
glue code to be placed outside of the Zephyr module repository.
This allows for placing glue code in Zephyr, but also allows users to
specify custom MODULE_EXT_ROOTs for glue code using either
`-DMODULE_EXT_ROOT` or `zephyr/module.yml` with
`build:settings:module_ext_root` settings.
MODULE_EXT_ROOT' is a list of directories, similar to other roots such
as BOARD_ROOT, DTS_ROOT, etc.
The Zephyr repo folder ${ZEPHYR_BASE} is always to the MODULE_EXT_ROOT
list as lowest priority.
For each MODULE_EXT_ROOT, the file
`<module_ext_root>/modules/modules.cmake` will be processed.
In Zephyr repo, the folder `modules/<module>/` contains CMakeLists.txt
and Kconfig glue code for the Zephyr module.
A Zephyr module can specify that CMakeLists.txt and Kconfig glue code is
placed in an external module root by specifying:
```
build:
cmake-ext: True
kconfig-ext: True
```
It is still possible to place the CMakeLists.txt and Kconfig files
directly in the Zephyr module using the existing:
```
build:
cmake: <path>
kconfig: <file>
```.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Remove the boards and shields lists from the 'usage' target output.
That might have been readable at some point long ago in Zephyr's
history, when only a few boards were available, but right now it's
obscuring the high level targets we really want 'usage' to print.
Instead, add 'boards' and 'shields' targets which the user can run to
get those lists, and reference them from the 'usage' output. This
makes 'usage' squintable again. We use the new list_boards.py script
from the 'boards' target.
Reference the 'help' target from 'usage' as well, and drop the
recommendation that people run '--target help' from the 'west build
--help' output for the 'west build --target' option. The canonical
place to look is 'usage' now.
Use the new list_boards.py code from 'west boards' as well, which
allows us to add the board's directory as a format string key, in
addition to its name and architecture.
Keep west-completion.bash up to date. While doing that, I noticed that
a bunch of references to this file refer to a stale location, so fix
those too.
Finally, the 'usage' output is what we print for a failed board or
shield lookup, so that needs to be updated also. Handle that by
invoking boards.cmake and a new shields.cmake in CMake script mode to
print the relevant output.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The toolchain variant per SoC is not always the soc name, so set this
per SoC and use this in the SDK instead of hardcoding the soc name.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit contains some additional review comments that was posted
after board revision PR #29990 was merged.
The follow-up changes are:
- Fixed typo: REVIVISION --> REVISION
- Renaming leftover in print message:
zephyr_check_board_revision --> board_check_revision
- Fixed regex, to allow revision 10, 20, 30, 40, etc.
- digits --> number in comment
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit introduces support for versioning of boards.
The existing board handling is limited in such a way that it is not
possible to support a specific board in multiple variants.
This commit introduces versioning of board revisions so that it is
possible to support minor variations to a board without having to
defining a completely new board.
This can be done by adding a revision.cmake file in the board folder:
boards/<arch>/<board-dir>/revision.cmake
Depending on the revision format chosen, additional configuration files
for each revision available must also be added, those have the form:
boards/<arch>/<board-dir>/<board>_<revision>.conf
Examples:
boards/<arch>/<board-dir>/<board>_defconfig: Common board settings
Revision format: MAJOR.MINOR.PATCH
boards/<arch>/<board-dir>/<board>_0_5_0.conf: Revision 0.5.0
boards/<arch>/<board-dir>/<board>_1_0_0.conf: Revision 1.0.0
boards/<arch>/<board-dir>/<board>_1_5_0.conf: Revision 1.5.0
Revision format: LETTER
boards/<arch>/<board-dir>/<board>_A.conf: Revision A
boards/<arch>/<board-dir>/<board>_B.conf: Revision B
The `board_check_revision` function is available in `extensions.cmake`
to facilitate board revision handling in `revision.cmake`.
User select the board revision using: `-DBOARD=<board>@<revision>`, as
example `-DBOARD=plank@0.5.0`.
If a shield, test, sample, or application needs to specify DTS overlay
or Kconfig fragments, this can be done by adding revision specific
configuration files in the sample/test/shield folder, like this:
<shield/sample-path>/boards/<board>.conf
<shield/sample-path>/boards/<board>_<revision>.conf
or if there is there is only a need for adjusting on a given board
revision:
<shield/sample-path>/boards/<board>_<revision>.conf
Similar for DTS overlay files:
<shield-path>/boards/<board>.overlay
<shield-path>/boards/<board>_<revision>.overlay
or:
<shield-path>/boards/<board>_<revision>.conf
For test/samples/apps:
<sample-path>/<board>.overlay
<sample-path>/<board>_<revision>.overlay
or:
<sample-path>/<board>_<revision>.overlay
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit extends zephyr_file(<mode>) to support `CONF_FILES` which
allows for finding and appending Zephyr Kconfig fragments and DTS
overlays.
Introducing mode:CONF_FILES allows have a uniform way of looking up
<board>.conf and <board>.overlay, and ensure that extending such
functionality keeps identical behaviour in shields, tests, and samples.
Using zephyr_file(CONF_FILES) a lot of duplicated code can be removed.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit fixes an issue where specifying a build type config file
in a subfolder named: `prj_<something>` would cause a wrong match and
fail to find Kconfig fragments, as example:
Working: `-DCONF_FILE=myconfigs/prj_debug.conf` would correctly add
myconfigs/boards/<board>_debug.conf to list of conf files.
Failing: `-DCONF_FILE=prj_configs/prj_debug.conf` would fail to locate
prj_configs/boards/<board>_debug.conf, and thus the board specific
config fragment was not added to the list of config files.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Currently only BOARD is printed when running CMake.
This commit prints shields together with board, if one or more shields
are specified.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Cleanup board and shield cmake code so that code duplication is reduced.
Before this commit, the code for verifying if BOARD or SHIELD user input
had changed was almost identical.
The common code has been made into a Zephyr extension function so that
all part of Zephyr build system can have a uniform way of checking if
sticky arguments has changed, and print user warning in a uniform way.
This also fixes an undiscovered flaw, where changing a shield is not
possible if a shield was defined at first CMake invocation, but in case
no shield had been specified at all, then build system would wrongly
allow specifying and changing shields, for example doing:
cmake -DBOARD=nrf52840dk_nrf52840 -DSHIELD=sparkfun_sara_r4 <sample>
cmake -DSHIELD=wnc_m14a2a
results correctly in:
> CMake Warning at zephyr/cmake/app/boilerplate.cmake:287 (message):
> The build directory must be cleaned pristinely when changing shields
and correctly keep existing SHIELD settings.
but doing:
cmake -DBOARD=nrf52840dk_nrf52840 <sample>
cmake -DSHIELD=sparkfun_sara_r4
cmake -DSHIELD=wnc_m14a2a
would not result in any warning, because `CACHED_SHIELD` was not
correctly checked in this case.
Changing shield is not a supported feature as it have unknown behavior.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Previously, `cmake/app/boilerplate.cmake` evaluated
ZEPHYR_EXTRA_MODULES on line ~548 *after* `zephyr_module.cmake`
was included on line ~168.
This change ensures that modules defined in `ENV{ZEPHYR_EXTRA_MODULES}`
are processed properly through `zephyr_module.cmake`.
Fixes#30673
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Fixes: #30232
This is a workaround for #30232.
During Zephyr CMake invocation a plain C compiler is used for DTS.
This results in the internal `CheckCompilerFlag.cmake` being included
by CMake
Later, when the full toolchain is configured, then
`CMakeCheckCompilerFlag.cmake` is included.
This overloads the `cmake_check_compiler_flag()` function, thus
causing #30232.
By manualy loading `CMakeCheckCompilerFlag.cmake` then
`CheckCompilerFlag.cmake` will overload the functions (and thus win the
battle), and because `include_guard(GLOBAL)` is used in
`CMakeCheckCompilerFlag.cmake` this file will not be re-included later.
It also prints a warning informing the user of the issue.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #29074
This reverts commit fc8f639b9a.
The suggestion provided in #27901 is impacting processing order of
overlay files in a non-logical way, see #29074 discussion for details.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #23825
Today, BOARD, SOC, ARCH, DTS, KCONFIG, and TOOLCHAIN_ROOT can be
specified by users or through other CMake files.
It is not clear if relative paths are permitted and/or from where a
relative path is constructed.
Inside CMake, it is very easy to specify `${ZEPHYR_BASE}`,
`${CMAKE_CURRENT_SOURCE_DIR}`, or similar, thus there is no reason to
use relative path inside CMake, as it easy can lead to discussion on
relative to what.
For users manually invoking CMake using, `cmake ... <app-dir>` it is
nice to have to possibility to specify a relative path.
For this purpose, relative path are considered relative to the
`APPLICATION_SOURCE_DIR`.
This commit updates:
- BOARD_ROOT
- SOC_ROOT
- ARCH_ROOT
- DTS_ROOT
- KCONFIG_ROOT
- TOOLCHAIN_ROOT
to allow paths relative to `APPLICATION_SOURCE_DIR` when specified with
`-D<type>_ROOT=<relative-path>`
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #28134
Minor fix for correctly testing if CONF_FILE variable is defined, and
if it is defined, then a current scope variable will be set with same
name. For a variable that is already present in current scope this has
no effect, but a cached variable (such as one provided with -DCONF_FILE)
will now have both a current scope and cached definition.
This ensures that current scope CONF_FILE will continue to be defined
even when the cached variable is cleared later.
Clearing of the cached variable ensures correct detection if user later
re-invokes CMake with a new -DCONF_FILE value.
The cached version is cleared later in favor of the CACHED_CONF_FILE
that is used between multiple CMake invocations.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #27934
This commit introduces additional naming support of config files.
It is now possible to create a config file of the form
`prj_<build>.conf` and automatically have a corresponding
`boards/<BOARD>_<build>.conf` config file merged.
As example, one can create a structure as:
|-- prj.conf
|-- prj_debug.conf
|-- boards
|-- nrf52840dk_nrf52840.conf
|-- nrf52840dk_nrf52840_debug.conf
when building: (existing behavior)
cmake -DBOARD=nrf52840dk_nrf52840 ...
prj.conf is merged with nrf52840dk_nrf52840.conf
when building: (new behavior)
cmake -DBOARD=nrf52840dk_nrf52840 -DCONF_FILE=prj_debug.conf ...
prj_debug.conf is merged with nrf52840dk_nrf52840_debug.conf
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Rename it to "runners_yaml_props_target", because the file name is
runners.yaml, not runner.yml.
Move it to the boilerplate definition so that we can modify it before
cmake/flash/CMakeLists.txt gets run.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Shield overlay file has to be taken into account after board overlay
file.
ex: When a new node need to be created for a specific board (in
boards/shields/shield_name/boards/board_name/*.overlay) and used by the
shield (in boards/shields/*.overlay), the order of the overlay files is
important
Signed-off-by: Ismael Fillonneau <ismael.fillonneau@stimio.fr>
Fixes: #25215
This commit introduces the possibility of defining ROOTs in a Zephyr
module and have it automatically appended to list of other ROOTs.
Supported with this commit:
- BOARD_ROOT
- SOC_ROOT
- DTS_ROOT
- ARCH_ROOT
In order to support this in Zephyr module files, the detection of west
has been moved to dedicated west.cmake file and included immediately
after python.cmake.
Also the inclusion of zephyr_modules.cmake has moved before first use
of BOARD_ROOT.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit aligns ARCH_ROOT to conform to BOARD_ROOT, DTS_ROOT,
SOC_ROOT that all allows list of directories.
Also it avoid code, such as:
if(BOARD STREQUAL my_board_using_out_of_tree_arch)
set(ARCH_ROOT some/out/of/tree/arch/path)
endif()
in application CMakeLists.txt.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit introduces support for multiple SOC_ROOT.
This means that additional SOC_ROOTs specified using -DSOC_ROOT as
argument to CMake will be forming a list together with ${ZEPHYR_BASE}.
This allows for greater flexibility, as developers can now specify
multiple out-of-tree SoCs and not worry about the SoC used for the
board they compile for.
Also it avoid code, such as:
if(BOARD STREQUAL my_board_using_out_of_tree_soc)
set(SOC_ROOT some/out/of/tree/soc/path)
endif()
in application CMakeLists.txt.
Finally, allowing multiple SOC_ROOTs prepares for specifying SOC_ROOTs
in Zephyr modules.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit relocates the generated Kconfig.modules file from
${CMAKE_BINARY_DIR} into ${CMAKE_BINARY_DIR}/Kconfig.
This is done as preparation of multiple SOC and ARCH root support.
A single Kconfig folder inside ${CMAKE_BINARY_DIR} helps to keep the
build folder tidy.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit is a followup to PR #25808 which updates the tests to
ensure the REQUIRED keyword is also used for the ZephyrUnitest package.
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
* Reset SHIELD_LIST on each root loop, to avoid matching
on shields from the previous iteration of the loop.
Signed-off-by: Pete Johanson <peter@peterjohanson.com>
Fixes: #25656
The commit a8e90cbfb3 improved handling of
shields. Unfortunately it pops items from the SHIELD variable which
works well if SHIELD is a CMake ;-separated list, but if the list is
a space separated list, as may be provided by the user, then this
principle fails as reported in #25656.
This is fixed by keeping improved behaviour, while popping from an
alternative SHIELD-NOTFOUND list instead.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
