It is found that when we use CONFIG_COUNTER and CONFIG_PM concurrently,
the RTC alarm callback can be used only once (in some cases, it just
won't work at all, e.g., using CONFIG_BT). By set the DBP bit on PWR
control register 1 via LL_PWR_EnableBkUpAccess function to temporarily
disable write protection every time we assign RTC alarm, we can register
alarm callback correctly. Tested on Nucleo WB55RG.
Fixes: #68673
Signed-off-by: Krisna Resi <krisna_resi@ymail.com>
In order to reduce dns resolve requests when using the dns
resolver an optional cache was introduced. This cache
retains query requests for the TTL duration and therefore
prevents premature refetching of DNS RRs.
Signed-off-by: Carlo Kirchmeier <carlo.kirchmeier@zuehlke.com>
Implement a sensor for the output diagnostics of the low side
switch BD8LB600FS.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Split up the driver for the low side switch BD8LB600FS into a GPIO
and MFD part.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Transition to a low power DMI L1 state should be allowed only after all
pending DMA channels transfers have started.
Signed-off-by: Serhiy Katsyuba <serhiy.katsyuba@intel.com>
Add support for XRGB32 pixel format as this is useful to test camera
and display drivers on i.MX RT11xx
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Dependencies of NXP_IMXRT_BOOT_HEADER were set incorrectly for the
RT11xx series part when building a dual core image. The boot header
should be enabled by default for the primary M7 core, and always
disabled when MCUBOOT is used or the M4 core is targeted
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
due to MQTT now have ALPN support
the example code of using ALPN to connect MQTT
over port 443 need to be added
Signed-off-by: sukrit buddeewong <sukrit.omu@gmail.com>
Implement the ALPN Support for Mqtt Library allow mqtt to have
ability to utilize ALPN for connect to server that support ALPN, such
as AWS IoT Core
Signed-off-by: sukrit buddeewong <sukrit.omu@gmail.com>
It is often desired to maximize the chances of receiving advertising
when scanning. To achieve this, the scanner should be enabled all the time.
Some controller implementations (like Nordic's SoftDevice Controller)
handle scheduling differently when scan_window = scan_interval.
Having a macro that defines this scanning configuration simplifies
writing applications.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Change the suspend/resume code to ensure that the interrupt are disabled
before changing the pin configuration. The current sequence has been
reported to cause spurious readouts on some platforms, this takes the
existing code and duplicates for the suspend and resume case, but swaps
the interrupt disable and configure for the suspend case.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Change the filter from CPU_HAS_MPU to ARCH_HAS_USERSPACE to
when filtering boards which support userspace.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Validate the new relocations for BL and BLX instructions by
creating a new test extension which contains a chain of global
functions in a pseudo random order to (hopefully) generate
relative jumps in both positive and negative directions.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Add support for the relocation type R_ARM_ARM_THM_CALL which is
produced for the ARM Thumb BL and BLX (branch immediate)
instructions.
These instructions are used for non-static functions like
void test1(void)
{
}
void main(void)
{
test1();
}
Without support for this relocation, test1() has to be static.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The opval argument of arch_elf_relocate() was modified by
adding the value stored at opaddr before passing it to
arch_elf_relocate(). This presumed that the addend would
always be stored as a raw value at opaddr, which is not the
case for all relocation types.
This PR modifies opval to be the absolute address of opval,
and moves the addition of the addend from llext_link_plt()
to the implementation of arch_elf_relocate().
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
RASID must not use 0 for any slot. According with documentation:
"""The operation of the processor is undefined if any two of the
four ASIDs are equal or if it contains an ASID of zero"""
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This commit implements a network registration status API,
including return of reject cause in case of denial.
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
This commit applies the issues detected in UDP to recv_raw() as
well. Please refer to the previous commit log for details.
Signed-off-by: Takuya Sasaki <takuya.sasaki@spacecubics.com>
When receiving a UDP packet, net_conn_input() searches for a
matching connection within `conn_used`.
However, when receiving UDP packets simultaneously from multiple
clients, we may encounter a situation where the connection that was
supposed to be bound cannot be found within `conn_used`, and raise
the ICMP error.
This is because, within recv_udp(), to avoid the failure of
bind_default(), we temporarily remove it from `conn_used` using
net_conn_unregister().
If the context already has a connection handler, it means it's
already registered. In that case, all we have to do is 1) update
the callback registered in the net_context and 2) update the
user_data and remote address and port using net_conn_update().
Fixes#70020
Signed-off-by: Takuya Sasaki <takuya.sasaki@spacecubics.com>
This commit adds the new internal function for update the callback,
user data, remote address, and port for a registered connection
handle.
Signed-off-by: Takuya Sasaki <takuya.sasaki@spacecubics.com>
This commit adds the new static function for change the remote
address and port to connection, and replaces the changing process
for remote address and port in net_conn_register().
Signed-off-by: Takuya Sasaki <takuya.sasaki@spacecubics.com>
The net_conn_change_callback() is not currently being called by
anyone, so this commit moves to static function, and replaces
the change callback parameter process in net_conn_register().
Signed-off-by: Takuya Sasaki <takuya.sasaki@spacecubics.com>
Since the move to HW model v2, the MCUxpresso NXP SDK drivers got
updated during the build due to a missed rename. This caused parallel
builds and CI to become flaky.
This fixes issue #70215.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Use `DT_REG_HAS_IDX()` instead of `DT_NODE_EXISTS()` when checking
if for a given nodelabel the base address of the associated node
should be validated, so that the validation is performed only if
the base address is available. This prevents build failures in cases
like the os_mgmt_datetime test where the `rtc` nodelabel is used for
an emulated RTC.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
A Bug in the watchdog driver code allows an unconfigured
WDT timer channel to be feed.
The first configured WDT timer channel has an id of zero.
At this point, data->m_allocated_channels is equal to one.
The condition of the if statement is invalid and allows
channel one to be feed.
Change the test condition from greater to greater-or-equal.
Add check if channel id is less than zero.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
This commit fixes Kconfig.nxp_mailbox depends on is now
set to correct value DT_HAS_NXP_MBOX_MAILBOX_ENABLED.
Signed-off-by: Tomas Galbicka <tomas.galbicka@nxp.com>
This commit changes the value of the `arch` from `riscv64` to `riscv`, so
that it is in line with the rest of the RISC-V boards.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
