* use _POSIX_AEP_REALTIME_DEDICATED instead of CONTROLLER
* use _POSIX_AEP_REALTIME_DEDICATED instead of MINIMAL in
comment
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Twister now uses GCOVR by default as the more reliable code
coverage reporting tool instead of LCOV.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Documentation pages around Kconfig have moved around on a couple of
occasions in the past [1] [2] and current redirects were dysfonctional
(leading /) and incomplete, while an entire set of redirects was also
missing. This notably fixes the "browse latest development version of
this page" link on
https://docs.zephyrproject.org/2.7.5/guides/build/kconfig/tips.html or a
link to the "Kconfig tips" page as found in Kconfiglib's current README
(https://pypi.org/project/kconfiglib/)
[1] commit 5342bc64dd [2] commit
5c88418428Fixes#66701
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
It is often confusing for users and developers alike to see the sentence
"stable API change" in a label or in the release notes. Stable APIs can
change in at least two ways (retaining compatibility or not), and so it
is preferrable to use a term that clearly describes the change as
incompatible, by using the common term "breaking".
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a note about the new K_MEM_POOL_HEAP_SIZE define and the mechanism
for specifying custom system heap size requirements.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are several subsystems and boards which require a relatively large
system heap (used by k_malloc()) to function properly. This became even
more notable with the recent introduction of the ACPICA library, which
causes ACPI-using boards to require a system heap of up to several
megabytes in size.
Until now, subsystems and boards have tried to solve this by having
Kconfig overlays which modify the default value of HEAP_MEM_POOL_SIZE.
This works ok, except when applications start explicitly setting values
in their prj.conf files:
$ git grep CONFIG_HEAP_MEM_POOL_SIZE= tests samples|wc -l
157
The vast majority of values set by current sample or test applications
is much too small for subsystems like ACPI, which results in the
application not being able to run on such boards.
To solve this situation, we introduce support for subsystems to specify
their own custom system heap size requirement. Subsystems do
this by defining Kconfig options with the prefix HEAP_MEM_POOL_ADD_SIZE_.
The final value of the system heap is the sum of the custom
minimum requirements, or the value existing HEAP_MEM_POOL_SIZE option,
whichever is greater.
We also introduce a new HEAP_MEM_POOL_IGNORE_MIN Kconfig option which
applications can use to force a lower value than what subsystems have
specficied, however this behavior is disabled by default.
Whenever the minimum is greater than the requested value a CMake warning
will be issued in the build output.
This patch ends up modifying several places outside of kernel code,
since the presence of the system heap is no longer detected using a
non-zero CONFIG_HEAP_MEM_POOL_SIZE value, rather it's now detected using
a new K_HEAP_MEM_POOL_SIZE value that's evaluated at build.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Support `zephyr-app-commands` being provided with a `build-dir-fmt`,
option, which assumes that `west config build.dir-fmt` has been run
previously.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Implement the CAP Commander discovery function.
Adds support for it in the shell.
This includes initial babblesim and unit testing as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The section 3.7.3.1 of the mesh specification recommends to delay
a message publication in certain cases:
- at power-up or upon state change for a time between 20 to 500 ms
- for periodic publications for a time between 20 to 50 ms
This change implements this recommendation by adding the
`CONFIG_BT_MESH_DELAYABLE_PUBLICATION` Kconfig option which enables
the randomization code and by adding the `bt_mesh_model_pub.delayable`
bit field which allows each model decide whether the publications
should be delayed for this model or not.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add an entry to indicate the changes to the coap_service_send and
coap_resource_send API functions.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Update coap_service_send and coap_resource_send to take an optional
pointer argument to the newly introduced coap_transmission_parameters.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Why?
- metadata is easier to manage as an array + index
- less error-prone -> less memory-management bugs
- we can. because of the previous refactor
- PDU allocations are more predictable
- ATT buffer size can be optimized by app
- isolates ATT from the rest of the ACL users
- decouples ATT PDU size from e.g. SMP w/ LESC
Drawbacks:
- higher memory usage
- kconfig change
The higher memory use is only temporary, as this will be followed-up
with more refactors that should bring it back down.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Co-authored-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Resolve wrong documentation c function links for
irq: z_shared_isr, rtio: rtio_cqe_get_mempool_buffer
and sensor: sensor_read
Signed-off-by: Simon Hein <Shein@baumer.com>
Having libpython3.8-dev explicitly mentioned causes issues if
"python3-dev" pulls a Python version that's not 3.8. What's more,
python3-dev already pulls the correct "versionless" libpython3-dev
anyway.
Fixes#66461
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Replace function parameter 'retries' with pointer to structure
holding coap transmission parameters. This allows setting the
retransmission parameters individually for each pending request.
Add coap transmission parameters to coap_pending structure.
Update migration guide and release notes.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Add UI to select preferred search engine when Google Programmable Search is
enabled. The user's preference is saved using local storage.
This also makes the search input field of type "search" for better UX (in
particular on mobile).
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add Google Programmable Search engine to the documentation, while
leaving it possible to easily revert to the built-in Sphinx search
engine. As the styling of the search results is apparently not thought
to be easy to tweak, the gcs.css stylesheet might require further
improvements.
Fixes#55173.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Some portions of the documentation do not make sense when shown as
"snippets" in search engines' results. Use "data-nosnippet" attribute to
instruct search engines (Google for sure, hopefully others in the
future) to exclude them.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The "Sphinx search extension" CSS rules are not needed as we are not
using this extension since we are not hosting on readthedocs.io.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Update to a more recent version of Doyxgen Awesome for better
compatibilty with recent versions of Doxygen.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This picks up custom javscript from Godot documentation and uses CSS
rules we already had in place (only they were not used) to tweak the
page scroll behavior. As folks scroll down the page, the Zephyr logo in
the top right corner gradually disappears, leaving more room for the
navigation menu.
Also, when scrolling in the navigation pane, the UI there is slightly
adapted to make it more clear that the search box is "fixed", plus,
when one reaches the bottom of the navigation tree and continues
scrolling, the "main" page scrolls down.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add README.rst file with description of sample which shows how to use
pytest and Twister together.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Improve documentation about pytest integration with Twister. Add
examples of usage, improve description of available options and
introduce automatic doc generation of two plugin classes (DeviceAdapter
and Shell) basing on their docstrings from source code.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Renames "prov device" references and options to
"provisionee" to align implementation with Mesh
Protocol specification v1.1, section 5.4.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
There is no in-tree user. Also, it is misleading as we use
SCOMPARE1 for spinlock too, not just IPC.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC should be defined at the SoC
or the board level since Xtensa cores are high configurable.
The default is just for ISS (Instruction Set Simulator). So
remove it from the arch level.
The xt-sim board is the only one in tree that is targeting
the ISS, so add it there.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() Moves the architecture specific timing measurement APIs
under the timing measurement APIs group.
() Add SoC and board specific API groups.
() Document each SoC and board specific API so the doc shows up
for them.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds a charge_enable handler to facilitate enabling and disabling
a charge cycle. This deprecates enabling and disable the charge
cycle via the CHARGER_PROP_STATUS property.
Signed-off-by: Ricardo Rivera-Matos <ricardo.rivera-matos@cirrus.com>
Rename the native Linux SocketCAN driver to reflect that it can can now be
used in both native_posix and native_sim (with or without an embedded
C-library).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add a delay parameter to asynchronous device runtim put. This allows
to delay the put operation what is useful to avoid multiple states
transitions.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Update migration guide to introduce the stm32_lp_tick_source
for stm32 device when choosing the LPTIM fo lowPower modes.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add the GMAP shell module with support for running the
various audio configurations in an easy way.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Commit adds implementation of the specification
recommendations regarding randomization of
responses on the access layer.
3.7.3.1 Transmitting an Access messages
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
samples/boards/nrf/system_off does not enable CONFIG_PM so
it should not be listed as an example in system power management
documentation.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Adds a note that the shell mcuboot erase command can no
longer erase the MCUboot or application slots
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The EXTRA_DTC_OVERLAY_FILE is also an important build system variable,
therefore add it to the list and give a brief description.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The Network Connectivity API page is kind of pointless, as it provides
little information (which can be found elsewhere as well) and it was
pointer out that it kind of creates noise in the documentation as it can
be confused with the page which provides a summary of network APIs.
Therefore, remove the page, and move the information from it elsewhere.
The brief summary of what APIs to use was moved the Networking APIs
index page. The information about the samples demonstrating BSD sockets
API usage was moved to the BSD sockets documentation page itself.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Several application protocol libraries documentation missed information
on how can they be enabled (i. e. missed info about associated Kconfig
symbol). This commit fixes it.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
