Add max size check to dac sam and sam0
There is no size check in dac_sam_write_value and dac_sam0_write_value.
Besides, the ret value should also be different.
Fixes#65021
signed-off-by: Gaetan Perrot <gaetanperrotpro@gmail.com>
Move reading PCIE_CONF_CMDSTAT before actual usage. There are four
return branches before value is used.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add an option to enable a input_kbd_matrix_actual_key_mask_set API to
enable or disable keys dynamically in the mask. This can be useful if
the exact key mask is determined in runtime and the device is using a
single firmware for multiple matrix configurations.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This change marks each instance of the 'rtc_driver_api' as 'static const'.
The rationale is that 'rtc_driver_api' is used for declaring internal
module interfaces and is not intended to be modified at runtime.
By using 'static const', we ensure immutability, leading to usage of only
.rodata and a reduction in the .data area.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Only reset cause is supported as there is no common unique id
present on those chips.
Unique ID can be put in OTP but there is no single specification for this.
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
Use K_KERNEL_STACK_SIZEOF instead of the config directly to set the
stack size in k_thread_create() calls.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Update LPSS DMA init interface which is common and
independent of parent-node.
Signed-off-by: Anisetti Avinash Krishna <anisetti.avinash.krishna@intel.com>
We should set the z_clock_hw_cycles_per_sec as the value of
the system clock frequency.
There was a mistake in referencing the clock source set before
initialization.
I corrected it to reflect the clock value after initialization.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
I/O or memory decoding should be disabled via the command register
before sizing BAR for calculation MMIO size
Signed-off-by: Najumon B.A <najumon.ba@intel.com>
Only copy up to IFNAMSIZ - 1 number of characters of the interface name to
leave room for null termination of string.
Fixes: #66777
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
When reconfiguring a previously used endpoint, it may still be locked
when a write was taking place when e.g. the host application crashed.
The call to udc_rpi_cancel_endpoint seems to do a proper cleanup of
the endpoint, i.e. the write semaphore will be released.
Fixes#66723.
Signed-off-by: Manuel Aebischer <manuel.aebischer@netmodule.com>
When Bluetooth is enabled, it is required to arbitrate flash accesses
between RF and write accesses (for user activity).
A dedicated flash manager is provided as part of STM32WBA BLE lib.
Implement a dedicated driver using FM Apis to handle RF activity.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
STM32WBA controller uses a PKA driver to perform cyphering operations
on keys. Since PKA hardware block requires RNG clock to be enabled, a
synchronization with zephyr RNG driver is needed.
Use RNG enable status to check if RNG could be switched off or needs to
be switched on.
Similarly in entropy driver, don't cut RNG clock if PKA is enabled.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
The driver works on active low signals only, change the interrupt
configuration to trigger on falling edges only.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
There are some issues with the extended endpoint settings. The incorrect
setting leads to the chip being unable to respond with NAK when the host
polls the extended endpoint for data transfers. Additionally, the controls
for the extended endpoint's ISO and PID data sequence are also incorrect.
This commit addresses these issues to properly support extended endpoint
transactions.
Signed-off-by: Ren Chen <Ren.Chen@ite.com.tw>
There are two registers that control the selection of one FIFO as data
buffer for 15 endpoints (ep1-ep15). Both registers should be configured
before sending and receiving data. Additionally, there was an issue with
the corresponding FIFO index setting in the 'usb_dc_ep_read_continue'
function, which has been addressed in this commit.
Signed-off-by: Ren Chen <Ren.Chen@ite.com.tw>
Turning on clock via clock controller and
resetting PIO device via reset controller on initializing.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Turning on clock via clock controller and
resetting PIO device via reset controller on initializing.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Turning on clock via clock controller and
resetting ADC device via reset controller on initializing.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Changed how to get clock frequency for PL022
Signed-off-by: Andrei-Edward Popa <andrei.popa105@yahoo.com>
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Removed all function calls from Raspberry Pi Pico SDK
Added functions for setting uart baudrate and format
Signed-off-by: Andrei-Edward Popa <andrei.popa105@yahoo.com>
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Changed how to get xtal frequency for Raspberry Pi Pico
Signed-off-by: Andrei-Edward Popa <andrei.popa105@yahoo.com>
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
The stm32H5 mcu has an independent USB supply to be enabled
at init with LL_PWR_EnableVDDUSB function like the stm32U5 serie.
Both series have PWR_USBSCR_USB33SV bit in their USBSCR POWER reg.
and other series all have PWR_CR2_USV bit in their CR2 POWER reg.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Boot into the deep power down state when `SPI_NOR_IDLE_IN_DPD` is not
enabled. DPD is the correct hardware state for the `SUSPENDED` software
state. Without this change, it takes a cycle of
`SUSPENDED->ACTIVE->SUSPENDED` to get to the low power state.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The previous behaviour led to an issue where we already expected data1
on the first transfer instead of data0. The DesignWare USB DC actually
implements the same behaviour. Also, the next_pid flag has to be reset
on setting up the endpoint.
Fixes#66283.
Signed-off-by: Manuel Aebischer <manuel.aebischer@netmodule.com>
The driver right now re-enters polling mode a couple times after the
matrix has been detected as stable as the key interrupt is still pending
and fires again once detection is reenabled.
Clear pending WUI interrupts before reenabling key press detection to
avoid that.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Information about IOAPIC can be located not in the first
DMAR Hardware Unit Definition subtable. Iterate them all.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixes uninitialized variable return by returning zero
at the end of function.
Signed-off-by: Anisetti Avinash Krishna <anisetti.avinash.krishna@intel.com>
