DMA controller is enabled and tested for cortex M7 core. The M7 core was
tested on the loop and channel link transfer tests.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
DMA controller is enabled and tested for cortex M7 core. The M7 core was
tested on the loop and channel link transfer tests.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This adds the configuration to pass the testcases
dma/loop_transfer and the dma/chan_blen_transfer
on the nucleo_f103rb board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds the configuration to pass tes testcases
dma/loop_transfer and the dma/chan_blen_transfer
on the nucleo_f207zg board.
The DMA2 instance supports mem2mem transfers.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds the configuration and set the DTS to pass
the dma/loop_transfer and the dma/chan_blen_transfer
on the nucleo_f429zi board.
The DMA2 instance supports mem2mem transfers.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds the configuration to pass testcases
dma/loop_transfer and the dma/chan_blen_transfer
on the nucleo_l152re board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds the configuration to pass testscases
dma/loop_transfer and the dma/chan_blen_transfer
on the nucleo_f091rc board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This commit sets the below configuration when
tests/drivers/dma/chan_blen_transfer is executed on stm32f3_disco
platform.
CONFIG_DMA_TRANSFER_DRV_NAME="DMA_1"
CONFIG_DMA_TRANSFER_CHANNEL_NR_0=4
CONFIG_DMA_TRANSFER_CHANNEL_NR_1=2
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit sets the below configuration when
tests/drivers/dma/loop_transfer is executed on stm32f3_disco
platform.
CONFIG_DMA_LOOP_TRANSFER_DRV_NAME="DMA_1"
CONFIG_DMA_LOOP_TRANSFER_CHANNEL_NR=4
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit configures DMA to run tests/drivers/dma/loop_transfer
test on nucleo_l552ze_q platform.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit configures the DMA to run
tests/drivers/dma/chan_blen_transfer test on nucleo_l552ze_q platform.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit configures the required DMA parameters to run
tests/drivers/dma/loop_transfer test on stm32l562e_dk platform.
This has been tested and is working as expected.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit configures the required DMA parameters to run
tests/drivers/dma/chan_blen_transfer test on stm32l562e_dk platform.
This has been tested and is working as expected.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This patch enables the DMA chan_blen_transfer and loop_transfer tests on
the nucleo_f070rb board.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
The chan_id value returned by dma_request_channel
can be negative, changing the type of chan_id to int.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Enables dma test cases loop_transfer and chan_blen_transfer
on stm32g03116_disco, nucleo_g071rb and nucleo_g0b1re.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
The Kconfig symbol CONFIG_DMA_0_NAME was recently removed. Update the
dma channel link transfer test to get the device name from an
application level Kconfig instead, similar to other dma driver tests.
This fixes a CI compliance failure that checks for references to
undefined Kconfig symbols.
Tested on the mimxrt1050_evk board.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
test minor/major link mode on frdm_k64f and mimxrt1060_evk
log as below:
Running test suite dma_m2m_link_test
===================================================================
START - test_dma_m2m_chan0_1_major_link
Preparing DMA Controller: Chan_ID=1, BURST_LEN=1
Starting the transfer
DMA transfer done ch 0
It is harder to be kind than to be wise........
It is harder to
PASS - test_dma_m2m_chan0_1_major_link
===================================================================
START - test_dma_m2m_chan0_1_minor_link
Preparing DMA Controller: Chan_ID=1, BURST_LEN=1
Starting the transfer
DMA transfer done ch 0
It is harder to be kind than to be wise........
It is harder to be kind than to
PASS - test_dma_m2m_chan0_1_minor_link
===================================================================
START - test_dma_m2m_chan0_1_minor_major_link
Preparing DMA Controller: Chan_ID=1, BURST_LEN=1
Starting the transfer
DMA transfer done ch 0
DMA transfer done ch 1
It is harder to be kind than to be wise........
It is harder to be kind than to be wise........
PASS - test_dma_m2m_chan0_1_minor_major_link
===================================================================
Test suite dma_m2m_link_test succeeded
===================================================================
PROJECT EXECUTION SUCCESSFUL
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Fix the error of the [Coverity CID :219489] "Structurally
dead code in tests/drivers/dma/loop_transfer/src/test_dma_loop.c"
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The dma test applications for MEM-to-MEM transfers are modified
to run on the stm32l476 with a DMA.
The CONFIG_DMA_LOOP_TRANSFER_DRV_NAME is either DMA_1 or DMA_2
CONFIG_DMA_LOOP_TRANSFER_CHANNEL_NR from 1 to 7 for DMA_1
CONFIG_DMA_LOOP_TRANSFER_CHANNEL_NR from 1 to 5 for DMA_2
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The dma test applications for MEM-to-MEM transfers are modified
to run on the stm32wb55 with a DMAMUX
loop_transfer on any CONFIG_DMA_LOOP_TRANSFER_CHANNEL_NR from 0 to 13
chan_blen_trasnfer on CONFIG_DMA_TRANSFER_CHANNEL_NR_0 from 0 to 13
and on CONFIG_DMA_TRANSFER_CHANNEL_NR_1 from 0 to 13
Signed-off-by: Francois Ramu <francois.ramu@st.com>
It adds flexibility to test different dma channels
The chan_blen_transfer is modified
like the loop_transfer application to support stm32xx devices
with dma and/or dmamux.
On the stm32 devices, the first dma channel is 1.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add Kconfig with the following options:
- DMA_LOOP_TRANSFER_DRV_NAME to set the DMA device name, because
some SOCs do not allow memory to memory DMA on all DMA devices
- DMA_LOOP_TRANSFER_CHANNEL_NR some SOCs start counting the DMA
channels at 1 instead of 0.
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
An old doxygen biolerplate was being copied all over the tests. The
defined groups are not being used anywhere and it does not follow how we
document tests for example in the kernel and other places.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
avoid to use the flash address as dma source,
to avoid flash cache issue
this is fix to issue #26812
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
for RT series CONFIG_NOCACHE_MEMORY need enabled
for Kinetis series CONFIG_DMA_TEST_SLOT_START for test
modify the target and dest alignment
frdmk64f need replace strlen to sizeof in irq callback
clean the unused receive buffer, so output is tidy
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The seasonal overhaul of test identifiers aligning the terms being used
and creating a structure. This is hopefully the last time we do this,
plan is to document the identifiers and enforce syntax.
The end-goal is to be able to generate a testsuite description from the
existing tests and sync it frequently with the testsuite in Testrail.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Re-run with updated script to convert integer literal delay arguments to
k_sleep to use the standard timeout macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move dma.h to drivers/dma.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
We have many testcases doing filtering both on the architecture level
and the platform level, which is redundant. Also many testcases are
running the same test twice on the same SoC for no good reason, cleanup
the tests and cleanup the filtering.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use sizeof instead of strlen to get the correct buffer
length and initialize rx buffer with zeros before the dma
transfer.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This will prepare test cases and samples with metadata and information
that will be consumed by the sanitycheck script which will be changed to
parse YAML files instead of ini.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I6c676bc6c5e850a8725785554cd535e32067f33e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
ztest has a number of assert style macros and used a baseline assert()
that varies from the system definition of assert() so lets rename
everything as zassert to be clear.
Change-Id: I7f176b3bae94d1045054d665be8b5bda947e5bb0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The test failed to initilise these to known states, so fix this by
asking for end of transfer and error callbacks.
Change-Id: I523168381329062ec0c17aa41cb4033b78d8ed99
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Update the dma loop transfer sample app to use the new
dma api interfaces. This change is based on the api change
and the updated dma driver.
A RFC was posted recently on this.
Jira: ZEP-873
Change-Id: I289e2e08d4c775a833bf3d585d2706a903edd0bc
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Update the dma block transfer sample app to use the new
dma api interfaces. This change is based on the api change
and the updated dma driver.
A RFC was posted recently on this.
Jira: ZEP-873
Change-Id: Icf3bec7260c2e499485b07a4a579956448a1a3fd
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To customise test builds and support test related features such as time
stamps and a boot banner, introduce a Makefile variant that is dedicated
to testing.
Initially we introduce a new config overlay that is used for all tests, in
this case we enable BOOT_BANNER and BUILD_TIMESTAMP. This will print the
current version and the date, useful when reporting bugs and also an
indicator that the system has booted before the test has started.
For example:
[QEMU] CPU: qemu32
***** BOOTING ZEPHYR OS v1.6.99 - BUILD: Dec 21 2016 19:57:13 *****
tc_start() - Test Nanokernel CPU and thread routines
Initializing nanokernel objects
...
..
Change-Id: I224318cdeb55a301964ea366dbc577e2e3a09175
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This moves the shell component into its own subsys and groups all
related files and options into a single place.
Additionally, one Kconfig option will now be required to enable the
shell:
CONFIG_CONSOLE_SHELL=y
The header files was also moved to include/shell/shell.h and can be now
referenced with
#include <shell/shell.h>
instead of
#include <misc/shell.h>
Updated documentation as well.
Change-Id: Iffbba4acfa05408055e9fd28dffa213451351f94
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This TC cover dma transfer with different channel and burst length
It support 2 ways to execute
*) full-auto: by default, it run all sub test cases defined in array
once flashing done and reset.
*) interactive: when CONFIG_CONFIG_CONSOLE_HANDLER_SHELL=y, it go into
shell first, user can input test command one by one for debugging.
move original test under drivers/dma to test_loop_transfer/
Change-Id: I7e78b730592c80bf2c23b20c8b0eb65a9b353acd
Signed-off-by: jing wang <jing.j.wang@intel.com>
Remove those from Makefiles and testcase.ini, we now support unified kernel
only and sanitycheck script now knows how to deal with this.
Change-Id: I853ebcadfa7b56a4de5737d95f2ba096babb2e13
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
