k_poll() for a signal is often desired for notification of completion
of asynchronous operations, but there are APIs where it may be
necessary to invoke "asynchronous" operations from contexts where
sleep is disallowed, or before the kernel has been initialized.
Extract the general notification solution from the on-off service into
a utility that can be used for other APIs.
Also move documentation out to a resource management section.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The resource table is needed by the Linux kernel OS
for a rpmsg generic support, but is also recognised by OpenAMP.
This table allows to add trace based on the RAM console
and to support rpmsg protocol.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Fixes: #23872
Relocating Zephyr Unittest CMake package to ensure that
HINTS ${ZEPHYR_BASE} in
find_package(ZephyrUnittest HINTS ${ZEPHYR_BASE}) works correctly when
the package has not been exported to CMake user package registry.
This ensure that the new package functionality is fully backwards
compatible on systems where the package is not exported and ZEPHYR_BASE
is set.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add @nandojve, the SAM V71 platform maintainer, as a code owner for
the SAM E70 platform, as these two platforms share the same base and
are practically identical.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Transfer review assignments from SebastianBoe to tejlmand.
Sebastian Bøe's role is being transferred to Torsten
Rasmussen (tejlmand).
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Adding ZephyrConfig.cmake and ZephyrConfigVersion.cmake allows projects
to use find_package to locate Zephyr.
This means that it will be possible to allow users to run CMake without
the need to source zephyr-env.sh or run zephyr-env.cmd.
This is especially useful for IDEs such as Eclipse or SES, where it will
no longer be required to source the above files before launching the
IDE.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit renames the `cortex_r` directory under the AArch32 to
`cortex_a_r`, in preparation for the AArch32 Cortex-A support.
The rationale for this renaming is that the Cortex-A and Cortex-R share
the same base design and the difference between them, other than the
MPU vs. MMU, is minimal.
Since most of the architecture port code and configurations will be
shared between the Cortex-A and Cortex-R architectures, it is
advantageous to have them together in the same directory.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This adds a rather primitive driver for use with the Intra-DSP
Communication (IDC) on the DSP on certain Intel SoCs. The IDC
generates interrupts from one core to another by writing to
certain registers. This is also being utilized as
the scheduler IPI since it can interrupt other cores.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The DSP wall clock timer on some Intel SoC is a timer driven
directly by external oscillator and is external to the CPU
core(s). It is not as fast as the internal core clock, but
provides a common and synchronized counter for all CPU cores
(which is useful for SMP).
This uses the RISCV timer as base as it is using 64-bit
counter.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add @stephanosio as a code-owner for the tests/arch/arm
test suites, so they get auto-assigned in reviews.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds basic testcases for sanitycheck tool using pytest.
Coverage for the sanitycheck tool is obtained using coverage tool.
Instructions are included in the README.md in
scripts/tests/sanitycheck directory.
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
This commit introduces boards/deprecated.cmake to allow deprecation
of existing boards, when a board is renamed.
This allows users to still specify the old board name, and let Zephyr
build system to select the new board name.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit reworks the Xilinx TTC timer driver to use the "match" mode
instead of the "interval" mode which counts up to the specified value
and resets to zero.
Using the "match" mode ensures that the timer keeps counting even after
an interrupt is triggered, and facilitates the tickless mode support
implementation.
This also allows `z_timer_cycle_get_32` to return the correct cycle
count when interrupt is locked; thereby, fixing the k_busy_wait hang
issue.
Note that the TTC "match" mode emulation (and tickless timer operation)
is only stable when the QEMU icount mode is enabled.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Since we already have similarly licensed 3-clause BSD files in the tree,
and in particular in our minimal libc, move the fnmatch functionality
from ext/ to lib/.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
IP ethernet switch board includes K66F MCU from NXP
and Micrel/Microchip KSZ8794CNX switch. Board support
includes basic GPIO LED and common functions.
Switch function needs support either based on DSA or
relative feature in Zephyr which is tracked with issue
22061.
Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Add entropy driver based on GECKO TRNG module along with device
tree support for EFM32PG and EFR32MG SOCs.
Signed-off-by: Pooja Karanjekar <pooja.karanjekar@lemonbeat.com>
Split up requirements.txt into several files so that CI tools can
utilize/reference the specific requirements-<FOO>.txt they may need
while keep things in sync with the development. This is to reduce
both time and amount of work CI actions due to python package install.
Create the following groupings:
1. BASE - needed to build or create zephyr images
2. BUILD-TEST - need to run compile/build tests
3. DOC - need to build the docs
4. RUN-TEST - need for runtime testing
5. EXTRAS - optional or useful for development/developers workflow
Also tried to add a comment about what or why a given package is being
pulled in for.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This never needed to be put in a separate gperf table.
Privilege mode stacks can be generated by the main
gen_kobject_list.py logic, which we do here.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add Platform Environment Control Interface API
This API defines following calls:
- peci_configure
- peci_enable
- peci_disable
- peci_transaction
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
daor-oti and wopu-ot also want to be added automatically as
reviewers to POSIX arch, native_posix, nrf52_bsim and bsim
related test apps.
(see CODEOWNERS for more info about which each is interested on)
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Add @stephanosio as a code owner for the Xilinx ZynqMP platform, which
is used as the primary testing platform for the Cortex-R architecture.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Replace running west command tests in run_ci.sh with a github workflow.
This provides some benefits in that we can run the west command tests on
multiple python versions and host OSes (linux, mac and windows).
Also have the benefit that the tests are only run on modifications to
files in scripts/west_commands/ or scripts/west-commands.yml.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add script to capture tracing stream data with UART backend. This
script is developed based on pyserial, so install it correctly
before using the script.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
This commits adds GPIO driver for LiteX SoC builder.
Due to the fact that GPIO in LiteX is unidirectional and can be
configured with different pins amount per port, additional entries
were added to the dts file.
Signed-off-by: Robert Winkler <rwinkler@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
Update driver code and board files to use new GPIO configuration flags
such as GPIO_ACTIVE_LOW. Also add implementation of new port_* driver
API.
Tested on external SX1509B breakout board and Thingy:52.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Test that the new port API functions all behave as expected, including
physical vs logical level for input and output as well as masked and
set-based output operations. Also tests the new pin API functions.
For running on real hardware this test now uses a local test-specific
devicetree binding. For build-only tests any platform with a GPIO
alias should be tested.
The new code increases flash requirements so add a filter to exclude
platforms that won't link.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Watchdog type is found on e.g. Pearl/Jade Gecko, often
more than 1 is present.
Driver supports timeout and (minimum) window configuration
and reset or timeout interrupt support for now.
Signed-off-by: Oane Kingma <o.kingma@interay.com>
Add a script that sets up Docker networking and starts the net-tools
Docker container. If successful, run Zephyr with native_posix and
execute the appropriate net-tools container executable. The proper
net-tools executable and arguments is selected depending on the
basename of the sample directory. This script needs to be updated
if the net-tools Docker image is updated in some incompatible way.
The net-tools directory is assumed to exist at the same level as
the Zephyr base directory, but its location can be set using the
'-N' command line argument. Likewise, '-Z' sets the Zephyr top level
directory.
When stopping Zephyr, go through all child processes since running a
native posix or other variant of Zephyr may cause a hierarchy of
processes to be created.
Fixes: #19540
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Introduce the basic ARM64 architecture support.
A new CONFIG_ARM64 symbol is introduced for the new architecture and new
cmake / Kconfig files are added to switch between ARM and ARM64.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
