Support NXP MRT on LPC55XXX SOC series, enable on
lpcxpresso55s69_cpu0, add test overlay to counter basic api test
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
NXP USB bindings were combined into one binding and using
a property corresponding to HAL enums which is improper use
of devicetree.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Commit c6e3bac4f changed the core clock frequency of LPC55XXX series.
That clock is used by the cortex-m systick timer, which is the
default timer used for system time in zephyr on this series.
The bug is that the config SYS_CLOCK_HW_CYCLES_PER_SEC default was not
updated on the affected platforms to account for this change, so system
time is currently recorded as 150% of reality. Fix this by changing the
kconfig to be set automatically at SOC level and remove board defaults.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
This commit updates all arm SoCs to set SOC_LINKER_SCRIPT CMake
variable to point to active linker script directly.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Do not clock the LPC55xxx cores from PLL1 when CONFIG_FLASH is set. This
is required due to the following limitation of the flash controller
(documented in the reference manual):
Flash operations (erase, blank check, program) and reading a single word
can only be performed for CPU frequencies of up to 100 MHz. These
operations cannot be performed for frequencies above 100 MHz.
The PLL1 clock source will result in a core clock of 150MHz, which
violates this requirement.
Fixes#62963
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add node for VREF0 peripheral to LPC55S3X SOC DT
Clock VREF peripheral if status = okay in DT
Enable VREF on lpcxpresso55s36
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
This commit follows the parent commit work.
This commit introduces the following major changes.
1. Move all directories and files in 'include/zephyr/arch/arm/aarch32'
to the 'include/zephyr/arch/arm' directory.
2. Change the path string which is influenced by the changement 1.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
It doesn't make sense to keep the aarch32 directory in the
'arch/arm/core' directory as the aarch64 has been moved out.
This commit introduces the following major changes.
1. Move all directories and files in 'arch/arm/core/aarch32' to
'arch/arm/core' and remove the 'arch/arm/core/aarch32' directory.
2. Move all directories and files in 'arch/include/aarch32' to
'arch/include' and remove the 'arch/include/aarch32' directory.
3. Remove the nested including in the 'arch/include/kernel_arch_func.h'
and 'arch/include/offsets_short_arch.h' header files.
4. Change the path string which is influenced by the changement 1
and 2.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
Reduce the main clock frequency from 150MHz to 144MHz which allows meeting
the full range of CAN bitrates.
Fixes: #60811
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Updated the clock init to reflect the sdk also
updated the clock frequencies to reflect the
respective soc clock values, this file originally
contained unexpected clock values, updated comments
to reflect changes and got rid of doxygen style
comments
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
NMI_INIT() is now a no-op, so remove it from all SoC code. Also remove
the irq lock/unlock pattern as it was likely a cause of copy&paste when
NMI_INIT() was called.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
1. Add support for the USB Full Speed controller
2. Add a Kconfig to specify if a dedicated USB
RAM is available in the SoC.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
To be consistent with the current NXP clocking scheme,
move the LPADC clocking code to the SOC files where
all of the other peripheral clocking is done.
Also remove any other SOC-specific code to the
respective SOC file and out of this driver.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
This prevents configuration errors if a board is configured when
the SoC indicates segger RTT support but the segger module is
not available.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This adds USB-HS support for LPC55S16, much in the same way that
LPC55S28 support was added previously.
Signed-off-by: Maxime Vincent <maxime@veemax.be>
The init infrastructure, found in `init.h`, is currently used by:
- `SYS_INIT`: to call functions before `main`
- `DEVICE_*`: to initialize devices
They are all sorted according to an initialization level + a priority.
`SYS_INIT` calls are really orthogonal to devices, however, the required
function signature requires a `const struct device *dev` as a first
argument. The only reason for that is because the same init machinery is
used by devices, so we have something like:
```c
struct init_entry {
int (*init)(const struct device *dev);
/* only set by DEVICE_*, otherwise NULL */
const struct device *dev;
}
```
As a result, we end up with such weird/ugly pattern:
```c
static int my_init(const struct device *dev)
{
/* always NULL! add ARG_UNUSED to avoid compiler warning */
ARG_UNUSED(dev);
...
}
```
This is really a result of poor internals isolation. This patch proposes
a to make init entries more flexible so that they can accept sytem
initialization calls like this:
```c
static int my_init(void)
{
...
}
```
This is achieved using a union:
```c
union init_function {
/* for SYS_INIT, used when init_entry.dev == NULL */
int (*sys)(void);
/* for DEVICE*, used when init_entry.dev != NULL */
int (*dev)(const struct device *dev);
};
struct init_entry {
/* stores init function (either for SYS_INIT or DEVICE*)
union init_function init_fn;
/* stores device pointer for DEVICE*, NULL for SYS_INIT. Allows
* to know which union entry to call.
*/
const struct device *dev;
}
```
This solution **does not increase ROM usage**, and allows to offer clean
public APIs for both SYS_INIT and DEVICE*. Note that however, init
machinery keeps a coupling with devices.
**NOTE**: This is a breaking change! All `SYS_INIT` functions will need
to be converted to the new signature. See the script offered in the
following commit.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
init: convert SYS_INIT functions to the new signature
Conversion scripted using scripts/utils/migrate_sys_init.py.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
manifest: update projects for SYS_INIT changes
Update modules with updated SYS_INIT calls:
- hal_ti
- lvgl
- sof
- TraceRecorderSource
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: devicetree: devices: adjust test
Adjust test according to the recently introduced SYS_INIT
infrastructure.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: kernel: threads: adjust SYS_INIT call
Adjust to the new signature: int (*init_fn)(void);
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Convert NXP LPC SOCs to use CMSIS SystemInit, and remove redundant code
where it exists. This will enable initialization flows to be more
standardized across all platforms.
Since LPC54xxx and LPC55xxx series enables SRAM banks in SystemInit,
provide Kconfigs to bypass this setting and keep additional SRAM
banks unclocked.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
update the endpint in dts to 6 to alignd with RM
enable usb-device for LPC55S28
all USB supported tests/samples PASS
samples:
scripts/twister -p lpcxpresso55s28 \
--device-testing --hardware-map ~/map.yml \
-T samples/subsys/usb/
...
INFO - 7 of 25 test configurations passed (100.00%),\
0 failed, 18 skipped with 0 warnings in 73.49 seconds
...
tests
scripts/twister -p lpcxpresso55s28 \
--device-testing --hardware-map ~/map.yml \
-T tests/subsys/usb/
...
INFO - 3 of 4 test configurations passed (100.00%),\
0 failed, 1 skipped with 0 warnings in 36.39 seconds
...
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Added a missing SDK function POWER_PowerInit
to the clock_init function of the soc in lpc55S36.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Update lpc54114 support to use LMA address offset instead of linking
secondary core image into primary core memory. This will allow support
with sysbuild to be enabled. Additionally, use partitions to select where
the secondary core image will be located in flash
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Use LMA adjustment building dual core image with LPC55s69. The load
address adjustment allows the second core image to be flashed onto the chip
by the debugger, into the secure region of the LPC flash.
Additionally, remove the build dependency that was enforced by the SOC.
This requirement to build the secondary core image first can be enforced
by the project itself, instead of the core.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
sys/util.h is not needed by soc.h, and was causing troubles with
redefinitions of ARRAY_SIZE (from HAL) in CI.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The platform has support for pinctrl, but it is selecting both pinmux
and pinctrl. Legacy applications requiring pinmux should enable it
manually.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
1. Add USB_STACK_USE_DEDICATED_RAM=1 define that is
used by the SDK USB driver
2. Delete unused "config USB_DEDICATED_MEMORY"
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Move the defines from usb_dc_mcux.h to usb_device_config.h
and fsl_os_abstraction.h. These headers are used by
the SDK USB driver. usb_dc_mcux.h header file is not longer
needed and hence deleted.
2. Delete the Zephyr implementation of the usb_device_struct
driver and use the one implemented inside the SDK USB
driver. This requires updating the references to
usb_device_struct inside the USB driver
3. Move defines and structures used by the driver
out of the header file that is included by the SDK and
into the MCUX USB driver.
4. Use end point defines provided by Zephyr instead of adding
them locally.
5. Add a Kconfig to set the thread stack size
6. Move code to enable interrupts back to usb_attach function.
Interrupts should be enabled after the init is successful,
else we see errors of the ISR getting called before the
init is complete causing Faults
6. Update west.yml to update the NXP HAL to get the updated
SDK USB driver.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Now that DMA drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that I2S drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Signed-off-by: Kumar Gala <galak@kernel.org>
This commit enables the SoC's flash memory controller.
- added lpc55s36 specific code in the NXP MCUX driver
to take advantage of the SoC's check-before-read
capability
- enabled the FMC node in the SoC's dtsi (iap)
- added the flash controller chosen node to the board's dts
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
Now that usb device drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Signed-off-by: Kumar Gala <galak@kernel.org>
USB SRAM region was accidentally deleted by an earlier
commit. Rename the memory region used by USB to USB_SRAM instead
of SRAM4. SRAM4 was the wrong name for this region.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Now that counter drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that entropy drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that flash drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Signed-off-by: Kumar Gala <galak@kernel.org>
This is temporary until support has been enabled. lpc55s36's IAP controller
is different and does not match previous implementations.
The Zephyr driver uses a data structure matching the IAP controller to
implement a feature that should normally come out of the ROM.
Since IAP support is not in yet, disabling the option in the SoC's Kconfig
and disabling the node in the device tree is the proper way to go forward.
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
LPC55s3x family has an additional analog mode bit available. Update
IOCON binding and IOCON driver to support setting this bit via a pin
control property.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Now that watchdog drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Typically the Kconfig.defconfig* will blindly enable a
watchdog and not respect the devicetree state of the watchdog.
Additionally we can get problems with prj.conf/defconfig
getting incorrectly overridden.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that ADC drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Typically the Kconfig.defconfig* will blindly enable a
sensor and not respect the devicetree state of the ADC.
Additionally we can get problems with prj.conf/defconfig
getting incorrectly overridden.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that I2C drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Typically the Kconfig.defconfig* will blindly enable a
sensor and not respect the devicetree state of the I2C.
Additionally we can get problems with prj.conf/defconfig
getting incorrectly overridden.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that clock control drivers are enabled based on devicetree we
need to remove any cases of them getting enabled by Kconfig.defconfig*
files as this can lead to errors.
Typically the Kconfig.defconfig* will blindly enable a sensor and not
respect the devicetree state of the clock control. Additionally we
can get problems with prj.conf/defconfig getting incorrectly overridden.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that PWM drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Typically the Kconfig.defconfig* will blindly enable a
sensor and not respect the devicetree state of the PWM.
Additionally we can get problems with prj.conf/defconfig
getting incorrectly overridden.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that SPI drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Typically the Kconfig.defconfig* will blindly enable a
sensor and not respect the devicetree state of the SPI.
Additionally we can get problems with prj.conf/defconfig
getting incorrectly overridden.
Signed-off-by: Kumar Gala <galak@kernel.org>
