Commit graph

6259 commits

Author SHA1 Message Date
Najumon B.A 93421cefa8 board: x86: add acpi hid for gpio
add acpi hardware id for gpio driver

Signed-off-by: Najumon B.A <najumon.ba@intel.com>
2024-04-22 06:50:38 -07:00
Najumon B.A 4a973db3d4 drivers: gpio: gpio_intel: add acpi base resource enumeration
add gpio_intel driver with acpi based resource enumeration support.
Also updated test cases overlay with new dts entires.

Signed-off-by: Najumon B.A <najumon.ba@intel.com>
2024-04-22 06:50:38 -07:00
Jan Kubiznak 030a8b1830 drivers: dac: dac_ad569x: Support for AD569x DACs.
Added support for Analog Devices AD5691 / AD5692 / AD5693 DACs.

Signed-off-by: Jan Kubiznak <jan.kubiznak@deveritec.com>
2024-04-22 06:50:01 -07:00
Wei-Tai Lee e22e2263b4 dts: bindings: add andestech,l2c
To descibe the AndesTech L2 cache. Besides, remove
redundant property in dtsi.

Signed-off-by: Wei-Tai Lee <wtlee@andestech.com>
2024-04-22 09:19:27 -04:00
Kai Vehmanen 45205f865e dts: xtensa: intel_adsp_ace20: correct SSP definition
The ace20 description has incorrect number of SSP instances
described. Correct number should be 3.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
2024-04-21 03:28:17 -07:00
Kai Vehmanen aecf19c3c1 dts: xtensa: intel_adsp_ace15: correct SSP definition
The ace15 description has incorrect number of SSP instances
described. Correct number should be 3.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
2024-04-21 03:28:17 -07:00
Kai Vehmanen bc63835ba2 dts: xtensa: intel_adsp_cavs25_tgph: correct SSP definition
The tgph description has incorrect number of SSP instances
described. Correct number should be 3.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
2024-04-21 03:28:17 -07:00
Daniel DeGrasse e396923198 dts: bindings: mipi-dbi: fix language describing mipi dbi modes
Update language describing mipi dbi modes to be more clear, removing a
run-on sentence

Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
2024-04-20 13:44:07 -04:00
Manuel Argüelles 5d2670ac1f drivers: pwm: mcux_ftm: allow to select clock source
FTM internal counter can be clocked by one of three clock sources
independent of the module bus clock. This patch introduces a DT property
to perform the clock selection from DT.

DT sources are updated to keep the current clock selection for all boards,
with exception of ucans32k1sic board which is migrated to use system
clock by default, as this seems to be a better choice for most cases.
Some PWM LED samples require slower clock so overlays are added for
those cases.

Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
2024-04-19 10:08:53 +02:00
Manuel Argüelles 445110b306 dts: arm: nxp: s32k1xx: fix RTC clock source
Set RTC clock source to the internal 32 KHz LPO. Currently RTC clock is
used to source RTC counter and FTM counter.

Fixes #71289

Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
2024-04-19 10:08:53 +02:00
Steve Boylan 5b72665c47 drivers: spi: Add support for half-duplex (3-wire) SPI
Add support for half-duplex (3-wire) SPI operation using the Raspberry
Pi Pico PIO.  To allow control of the size of the driver, including
half-duplex support is optional, under the control of Kconfig options.

The original PIO source code is also included as a reference.

Corrected 3-wire tx/rx counts.

Enable half-duplex code based on DTS configuration

Replace runtime checks with static BUILD_ASSERT()

Remove too-fussy Kconfig options

Removed PIO source per review request

Signed-off-by: Steve Boylan <stephen.boylan@beechwoods.com>
2024-04-18 08:09:15 -07:00
Franciszek Zdobylak f0f897da4a dts: sifive: Update SoC compats
Update compatible strings to make them consistent across SiFive SoCs.

Signed-off-by: Franciszek Zdobylak <fzdobylak@antmicro.com>
2024-04-18 14:56:00 +02:00
Declan Snyder 537d5c310c dts: nxp: Convert ENET DT default to new binding.
Convert all of the NXP SOCs with ENET to use the new
binding scheme, which is used by the new driver.

Convert any boards using this SOC to the new scheme as well,
and remove from the documentation the bit about the experimental
nature of the new driver and the overlay that shall no longer exist.

Some of the boards I do not have the hardware of, so apologies
if something breaks, as I have no way to know. All the boards
were made sure to at least build.

Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
2024-04-18 11:18:31 +02:00
Declan Snyder ac58f3abe6 drivers: nxp_enet: Generate MAC using eth.h
The MAC address macros are ridiculous in this driver.
Rewrite to be simpler and use eth.h common function.
Also, clarify the mac address generation on the DT overlays.

Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
2024-04-18 11:18:31 +02:00
Zhaoxiang Jin a30695b711 dts: nxp: Add LPADC clocks properities to SoC dtsi
Add LPADC clock properties to SoC dtsi on adc/lpadc node

Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
2024-04-18 11:16:45 +02:00
Eran Gal e58dfac374 drivers: dac: Add TI DACx0501 driver
Adds a DAC driver for Texas Instruments DACx0501 family of devices

Signed-off-by: Eran Gal <erang@google.com>
Co-authored-by: Martin Jäger <17674105+martinjaeger@users.noreply.github.com>
2024-04-17 14:37:21 +02:00
Grzegorz Swiderski 163cacbe4b dts: nordic: nrf54h20: Add SysCtrl VEVIF node
Add a VEVIF node to be used for communicating with SysCtrl (cpusys).
This is the only part of the SysCtrl VPR exposed to local domains.

Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
2024-04-17 14:36:12 +02:00
Daniel DeGrasse 7477636f0f drivers: mipi_dbi: allow MIPI mode to be set via devicetree
Enable MIPI mode to be set via devicetree, for displays that support
multiple MIPI DBI modes. This commit also adds new helpers for displays
that allow drivers to initialize the entire MIPI DBI configuration
structure from devicetree

Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
2024-04-17 14:30:05 +02:00
Tianshuang Ke 8ffefab29f dts: arm: st: Fix incorrect memory mapping and size for STM32L475Xe
This commit updates the SRAM configuration in the STM32L475 device tree:

- `sram0` size reduced from 128K to 96K.
- `sram1` added with 32K.

These changes correct memory settings to prevent initialization failures.

Signed-off-by: Tianshuang Ke <qinyun575@gmail.com>
2024-04-17 14:29:22 +02:00
Jakub Zymelka bce52c8057 dts: add nRF54L15 FLPR core
Add nRF54L15 FLPR core support.

Signed-off-by: Jakub Zymelka <jakub.zymelka@nordicsemi.no>
2024-04-16 18:36:58 +01:00
Jun Lin 011b730b4c driver: reset: npcx: add driver support for reset controller
Nuvoton NPCX chips have reset registers which allow to reset the
peripheral hardware modules. This commit adds the support by
implementing the reset driver. Note that only the reset_line_toggle API
is supported because of the nature of the reset controller's design.

Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
2024-04-16 09:09:13 +02:00
Tim Lin 36f1092ed7 ITE: dts: it82xx2: Add missing extend setting of alternate function
If I2C3 switches from GPH1/GPH2 to GPB2/GPB5, extend setting
is required.

Test: Accessing I2C is normal if I2C2, I2C3, I2C5 are switched.

Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
2024-04-16 09:05:38 +02:00
Caleb Perkinson 2fc42054a5 doc: correct sparkfun,serlcd.yaml
yaml file did not match device tree bindings.

Signed-off-by: Caleb Perkinson <calebperkinson@gmail.com>
2024-04-14 15:39:34 -07:00
Mahesh Mahadevan e37d1a5489 dts: nxp_mcxn94x: Add DMA channels for FlexComm nodes
Copy the DMA channel information to both UART and SPI
instances of the Flexcomm as only one of them can be
active.

Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2024-04-13 07:03:55 -04:00
Emilio Benavente d2bfed764c dts: arm: nxp: nxp_mcxn94x: Add PWM Support
Added the dts node for FlexPWM Support.

Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
2024-04-12 16:53:03 -04:00
Laurentiu Mihalcea 94d156c9c8 nxp: imx8ulp: enable serial interface
Enable serial interface on i.MX8ULP.

This also includes a SHA update for hal_nxp which
pulls in the following commits relevant to Zephyr:

* 3366f234ed47 build: hal_nxp: add TPM counter support
* 6544455fcf46 Compile in PXP driver if LVGL is set to use
PXP.
* 31463a848bcd devices: MIMX8UD7: add definition for
LPUART_RX_TX_IRQS

Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
2024-04-12 16:52:38 -04:00
Ederson de Souza eeebb4d911 kernel: Device deferred initialization
Currently, all devices are initialized at boot time (following their
level and priority order). This patch introduces deferred
initialization: by setting the property `zephyr,deferred-init` on a
device on the devicetree, Zephyr will not initialized the device.

To initialize such devices, one has to call `device_init()`.

Deferred initialization is done by grouping all deferred devices on a
different ELF section. In this way, there's no need to consume more
memory to keep track of deferred devices. When `device_init()` is
called, Zephyr will scan the deferred devices section and call the
initialization function for the matching device. As this scanning is
done only during deferred device initialization, its cost should be
bearable.

Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
2024-04-11 15:50:44 -04:00
Krzysztof Chruściński 8acc6a961a dts: common: nordic: nrf54: Add rx-delay property to SPI
Add rx-delay property to all SPI nodes.

Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
2024-04-11 14:30:41 +02:00
Daniel DeGrasse 821ae15744 dts: arm: nxp_rw6xx: add USBOTG devicetree node
Add devicetree node for USBOTG device, the EHCI based USB controller on
the RW6XX.

Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
2024-04-11 09:09:00 +02:00
David Leach 00b46686b1 drivers: lpc55s36: Remove deprecated CSS driver
CSS was deprecated from the mcu-sdk. Removing driver from lpc55s36
to clear build error.

This is a temporary patch to remove the build error.

Fixes #69961

Signed-off-by: David Leach <david.leach@nxp.com>
2024-04-10 14:11:34 -04:00
TOKITA Hiroshi e678a6247d drivers: serial: rpi_pico: Migrate to pl011 driver
RaspberryPi Pico's UART can be operated with the pl011 driver.
Replace it with this.

Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
2024-04-10 10:01:25 +02:00
Tomasz Leman a200dd88d8 dts: xtensa: intel_adsp: Set soft-off state as disabled
Configure the 'soft-off' power state for manual selection only in the
DTS for Intel ADSP ACE 1.5 MTPM and ACE 2.0 LNL platforms.

Changes include:
- Setting 'min-residency-us' to 0 to indicate that the 'soft-off' state
  is not intended for automatic selection by the power management
  policy.
- Adding a 'status' property set to "disabled" to prevent the power
  management policy from using this state during its decision process.

The 'soft-off' state remains available for manual selection by calling
`pm_state_force`. This change ensures that the state can still be used
when explicitly requested by the system or application, providing
flexibility for power management operations.

Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
2024-04-09 16:58:24 +02:00
Daniel Maslowski 6b495ceda9 dts: jh7110: fix memory definitions
The L2LIM is 2MB in size, see:
https://doc-en.rvspace.org/JH7110/TRM/JH7110_TRM/u74_memory_map.html
Rename it since there are other memory blocks such as the DTIM for the S7.

Signed-off-by: Daniel Maslowski <info@orangecms.org>
2024-04-09 14:20:39 +02:00
Benedikt Schmidt 888d071fe7 drivers: sensor: implement output diagnostics sensor for TLE9104
Implement a sensor for the output diagnostics of the power train
switch TLE9104.

Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
2024-04-09 11:07:27 +02:00
Benedikt Schmidt 84a40778af drivers: gpio: split up driver for TLE9104 into a MFD
Split up the driver for the power train switch TLE9104 into a
MFD and GPIO.

Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
2024-04-09 11:07:27 +02:00
Jiafei Pan 21f0d9b3a9 dts: mimx8mn: add gpt counter device nodes
Add dts node for GPT counter.

Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
2024-04-09 11:06:24 +02:00
Jiafei Pan f81cf5b61e dts: mimx8mm: add gpt counter device nodes
Add dts node for GPT.

Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
2024-04-09 11:06:24 +02:00
Jiafei Pan 212af1f33d dts: mimx8mp: add gpt counter device nodes
Add GPT counter device nodes.

Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
2024-04-09 11:06:24 +02:00
Laurentiu Mihalcea 399c2cba65 nxp: imx8ulp: enable pinctrl
This commit enables pinctrl on i.MX8ULP. This includes:
	1) Adding `pinctrl_soc.h` header file.
	2) Adding DTS node for IOMUXC1, which is one of the
	IPs responsible for managing the 8ULP pads.
	3) Adding .dtsi with pin definitions. For now, only
	the LPUART7 pads are added to this file because this
	is going to be the only consummer for now.
	4) Modifying the `pinctrl_imx.c` driver to work for 8ULP.
	5) Enabling the `CONFIG_HAS_MCUX_IOMUXC`, which is a
	dependency of `CONFIG_PINCTRL_IMX`.

Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
2024-04-09 11:06:14 +02:00
Nikodem Kastelik 0401d063fa dts: nordic: add PWM instances for nRF54 Series
Add definitions of PWM peripheral instances so it can be utilized
on nRF54H20 and nRF54L15 devices.

Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
2024-04-09 11:05:46 +02:00
Gaetan Perrot 4d5606b55b doc: driver: input: espressif touch_sensor Typo
Example code was incorrect.

Signed-off-by: Gaetan Perrot <gaetanperrotpro@gmail.com>
2024-04-08 18:19:10 -05:00
Nicolas Goualard d9fd292f4b drivers: input: CHSC6X Driver
Added a driver for the CHSC6X chip used on the
Seeed Studio Round Display for Xiao

Signed-off-by: Nicolas Goualard <nicolas.goualard@sfr.fr>
2024-04-08 09:28:36 -04:00
Adam Berlinger 91acd6c1e0 drivers: timer: add support for LPTIM on STM32H5
Added support for LPTIM1/2 for STM32H503 and
LPTIM1 to LPTIM6 for STM32H56x/STM32H57x devices

Signed-off-by: Adam Berlinger <adam.berlinger@st.com>
2024-04-08 15:55:24 +03:00
Adam Berlinger e3c759e835 soc: st: add PM support for STM32H5
Single STOP mode level supported on STM32H5

Signed-off-by: Adam Berlinger <adam.berlinger@st.com>
2024-04-08 15:55:24 +03:00
Daniel DeGrasse 58e78c4af7 dts: bindings: add binding for sitronix ST7796s
Add binding for sitronix ST7796s, a MIPI DBI display controller
supporting up to 320x480 displays at 18 BPP

Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
2024-04-08 09:04:06 +02:00
Chun-Chieh Li 360bc4f1ca drivers: i2c: numaker: support Nuvoton's M2L31 series
Add i2c nodes into soc devicetree

Signed-off-by: Chun-Chieh Li <ccli8@nuvoton.com>
2024-04-08 09:03:53 +02:00
Daniel Irekvist c38ea288ee boards: sparkfun: Fix incorrect pro_micro gpio-map
The SparkFun Pro Micro header pins are numbered D1, D0, GND, ... from top
left whereas the SparkFun Pro Micro RP2040 and the Adafruit KB2040 boards
are using gpio 0, 1, GND, ... , so the pro_micro: connector gpio-map of
these boards should reflect that.

Graphical Datasheet for SparkFun Pro Micro RP2040:
https://cdn.sparkfun.com/assets/e/2/7/6/b/ProMicroRP2040_Graphical_Datasheet.pdf

Graphical Datasheet for SparkFun Pro Micro:
https://cdn.sparkfun.com/assets/f/d/8/0/d/ProMicro16MHzv2.pdf

Pinout of the Adafruit KB2040:
https://learn.adafruit.com/assets/106984

Please note that the KB2040 uses CircuitPython pin labels D0, D1 which does
not seemt correspond to the Arduino labels D0 and D1 used by the Pro Micro.

Signed-off-by: Daniel Irekvist <ulmanyar@gmail.com>
2024-04-07 11:12:18 +03:00
Sylvio Alves 561f31bb54 soc: espressif: esp32s3: update to hal_espressif v5.1
Modify and reorganize SoC to meet updated hal.

Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
2024-04-05 13:39:53 +02:00
Gerard Marull-Paretas 17ed60f0b5 dts: nordic: nrf54h20: add ccm030
Add node for CCM030 instance (AES CCM mode encryption).

Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
2024-04-05 13:19:21 +02:00
Daniel DeGrasse cc3de261aa dts: arm: nxp_rw6xx: add LCDIC node
Add LCDIC devicetree node or RW6xx SOC

Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
2024-04-04 23:59:37 +03:00