Enable these tests for native_sim and switch from
native_posix to native_sim as default test platform
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable these tests for native_sim and switch from
native_posix to native_sim as default test platform
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable these tests in native_sim
and switch from native_posix to native_sim as default
test platform
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Further reduce code duplication by moving test code for similar test
cases into a helper function, parametrized based on the test case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Move code responsible for net context initialization, repeated over
multiple test cases, to a helper function to reduce code duplication.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Modify internal L4 protocols APIs, to allow to enforce checksum
calculation, regardless of the checksum HW offloading capability.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Implement testcases for Information Reporting Interface [300-399]:
* LightweightM2M-1.1-int-301 - Observation and Notification of parameter
values
* LightweightM2M-1.1-int-302 - Cancel Observations using Reset
* LightweightM2M-1.1-int-304 - Observe-Composite Operation
* LightweightM2M-1.1-int-306 – Send Operation
* LightweightM2M-1.1-int-307 – Muting Send
* LightweightM2M-1.1-int-308 - Observe-Composite and Creating
Object Instance
* LightweightM2M-1.1-int-309 - Observe-Composite and Deleting
Object Instance
* LightweightM2M-1.1-int-310 - Observe-Composite and modification of
parameter values
* LightweightM2M-1.1-int-311 - Send command
303 and 305 cannot be implemented using Leshan as it only support
passive cancelling of observation.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When testcases share one DUT per module, we save the time
from running bootstrap on each testcase.
Each testcase start with DUT that is registered.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Implement support for reading stream of events from Leshan.
This allows testing the LwM2M SEND/Notify/Update operations
and reading content of those.
Also convert the whole Leshan class to use requests.session() so
it pools up connections and uses keep-alive.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add remaining test cases from
Device management & Service Enablement Interface
* LightweightM2M-1.1-int-222 – Read on Object
* LightweightM2M-1.1-int-223 – Read on Object Instance
* LightweightM2M-1.1-int-224 – Read on Resource
* LightweightM2M-1.1-int-225 – Read on Resource Instance
* LightweightM2M-1.1-int-226 – Write (Partial Update) on
Object Instance
* LightweightM2M-1.1-int-227 - Write (replace) on Resource
* LightweightM2M-1.1-int-228 - Write on Resource Instance
* LightweightM2M-1.1-int-229 - Read-Composite Operation
* LightweightM2M-1.1-int-230 - Write-Composite Operation
* LightweightM2M-1.1-int-231 - Querying basic information
in SenML JSON format
* LightweightM2M-1.1-int-232 - Querying basic information
in SenML CBOR format
* LightweightM2M-1.1-int-233 - Setting basic information
in SenML CBOR format
* LightweightM2M-1.1-int-234 - Setting basic information
in SenML JSON format
* LightweightM2M-1.1-int-235 - Read-Composite Operation on root path
* LightweightM2M-1.1-int-236 - Read-Composite - Partial Presence
* LightweightM2M-1.1-int-237 - Read on Object without specifying
Content-Type
* LightweightM2M-1.1-int-241 - Executable Resource: Rebooting the device
* LightweightM2M-1.1-int-256 - Write Operation Failure
* LightweightM2M-1.1-int-257 - Write-Composite Operation
* LightweightM2M-1.1-int-260 - Discover Command
* LightweightM2M-1.1-int-261 - Write-Attribute Operation on a multiple
resource
* LightweightM2M-1.1-int-280 - Successful Read-Composite Operation
* LightweightM2M-1.1-int-281 - Partially Successful Read-Composite
Operation
Modify tests binary
* Allow CoAP payload of 1211 bytes.
* Allow outgoing messages to use block-wise if they are bigger.
* Use 4kB encode buffer for outgoing messages.
* Check configured heap and stack sizes.
* Limit number of interface addresses, sockets and contexts
Qemu-cortex-m3 platform ran out of RAM, so reconfigure it to use
* packet size of 256 bytes.
* encode buffer of 2kB
This exercises the block-transferring on some of the test cases.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
* Add support for running interoperability tests with
Qemu X86.
* Remove some debugging messages to allow binary to
fix Qemu Cortex-M3 board.
* Tune buffer and stack sizes to fit all boards.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Do not include the resource type (rt=) in the registration message when
using the OMA JSON format. This was a workaround specifically for the
Wakaama LwM2M server which is no longer needed since the latest master
branch.
Signed-off-by: Marc Lasch <marc.lasch@husqvarnagroup.com>
When working on new test cases for checksum_offload test suite it turned
out that some existing test cases were already broken and not testing
what expected. This commit fixes the broken functionality:
* Despite having two separate interfaces for offloaded and
non-offloaded checksum scenario, all packets ended up in a single
interface anyway due to src address matching. Therefore use
different destination address, depending on tests.
* Add separate semaphores for offloaded and non-offloaded case, to
ensure that the packet ended up on the correct interface.
* The packet loopback in RX cases was broken, the LL address, IP
address and UDP port swap written data in wrong places.
* The receive path was not tested in the offloaded case.
Additionally, do a small cleanup before adding more tests:
* Fix net_context leak.
* Configure IPv6 neighbor once, during setup.
* Add before function to cleanup the flags before tests execute.
* Split tests into separate test cases, as they're not really
dependent on each other.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The optlen parameter passed to getsockopt() should be of (socklen_t *)
type. Using int produced build errors on 64 bit platforms.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Recently added tests require more stack on certain platforms
(nrf52840dk_nrf52840 in this case), hence increase the ZTEST stack size.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add case 'test_resend_request' to test that coap_client resends
the message if no response received.
Add response code check to case 'test_no_response'.
Initialize messages_needing_response[] in test setup.
Lower CONFIG_COAP_INIT_ACK_TIMEOUT_MS and decrease delays.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Instead of forcing use of NEWLIB_LIBC, select any available complete C
library implementation. Add CONFIG_REQUIRES_FLOAT_PRINTF where needed.
Signed-off-by: Keith Packard <keithp@keithp.com>
This checks that if connect() timeouts, we check TCP pointer
properly in select() and poll() in order to catch the situation.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If the first Ethernet interface is not the first network
interface, then there might be two interfaces with the same name.
The test does not like that.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The sent pkt must be removed after we have cloned it
in the simulated driver otherwise there is a memory leak.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The IPV6_V6ONLY option is only checked if
CONFIG_NET_IPV4_MAPPED_TO_IPV6 option is set.
By default the IPV6_V6ONLY option is set.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When resource instances are initialized, we must calculate
beginning of the data buffer using the index and maximum
data length. Otherwise buffers would overlap with previous.
Fixes#64011
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Resend the request with Echo option and the received Echo
option value when receiving a 4.01 (Unauthorized) response
with the Echo option.
Add missing header file kernel.h to coap_client.h.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Add new configuration value CONFIG_LWM2M_UPDATE_PERIOD
that allows calculating update period from last update,
instead of calculating it from the lifetime.
In runtime, server is allowed to change the lifetime of the
registration which causes update perdiod to be effected.
When fixed update period is preferred, UPDATE_PERIOD
config is then used.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Split the conversion of the RTR frame flags from the data contents test as
RTR frames do not carry any data.
Replace a couple of direct DLC assignments with proper use of
can_bytes_to_dlc().
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
rand32.h does not make much sense, since the random subsystem
provides more APIs than just getting a random 32 bits value.
Rename it to random.h and get consistently with other
subsystems.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Only confirmable messages need pending tracking. Non-confirmable
messages are released after sending.
Match incoming packets with token, not message ID.
Ignore responses with non-matching tokens.
Remove unused function send_reset().
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
In case observation token changes (the LwM2M server re-sends
observation request to the client), the LwM2M engine should cancel any
ongoing notifications based on the old token. Otherwise, it will be
impossible to match the pending notification reply (ACK) with the
observer context anymore, causing new notifications for this
observation to stall.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Always clone net_pkt to pass to promiscuous queue.
Previously, net_pkt was passed to L2 before conditionally cloning.
But L2 would in some cases strip ethernet headers, so cloned
net_pkt received through promiscuous interface would be missing headers.
Signed-off-by: Kieran Tyrrell <kieran@sienda.com>
Rearranges the k_mem_slab fields so that information that describes
how much of the memory slab is used is co-located. This will allow
easier of its statistics into the object core statistics reporting
framework.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
A minor overlook from the recent ICMP rework, the registered handlers
should no longer unref the processed packet as it's now the
responsibility of the ICMP module.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A little refactoring that simplifies dealing with nanosecond timestamp
values in packets and further decouples calling code from PTP:
Benefits:
- simplifies calling code by removing redundant conversions.
- prepares for removing PTP dependencies from net_pkt.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Added a new event for LWM2M_RD_CLIENT_EVENT_DEREGISTER for
indicate LwM2M client dereistartion.
Updated unit test and sample for new event type
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
