Previously, it was possible to declare an iterable section using
the alternate form (where the `out_type` does not correspond
to the `struct_type`) but there was no convenient means to
iterate over them.
Add `STRUCT_SECTION_FOREACH_ALTERNATE()` to fill the gap.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
This adds commands to advertise Solicitation PDUs, configure
On-Demand Private Proxy and manage Solicitation PDU RPL.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
This is initial implementation of Proxy solicitation procedure.
This includes:
- support for sending and receiving Solicitation PDUs
- On-Demand Private Proxy functionality (Server and Client) controlling
behaviour of node after receiving Solicitation PDU
- Solicitation PDU RPL Configuration (Server and Client), which manages
Replay Protection List for Solicitation PDUs.
Proxy Solicitation allows to enable advertising of Proxy service on node
by sending Solicitation PDUs. These PDUs are not part of Mesh messages;
instead, these are non-connectable, undirected advertising PDUs with
their own format, containing Proxy Solicitation UUID.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
* Test that the Large Composition Data server can send a max access
payload metadata status message.
* Test that the Large Composition Data client can request large chunks
of metadata from the server, and correctly merge samples.
* Refactoring of existing LCD tests.
Signed-off-by: Stine Akredalen <stine.akredalen@nordicsemi.no>
This patch adds for handling Models Metadata Get Page 128.
Signed-off-by: Michal Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Composition Data Page 1 contains information about relations between
models. Implementation saves relations into array of tuples
{ptr to base, ptr to extension, relation type} on model initialization
and uses this information to construct Composition Data Page 1.
Appropriate structures and methods were added to API, allowing user to
parse all received data into Composition Data Page 1 formats:
Composition Data Page 1 Element, Model Item, Model Extension Item.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
- Add entry for client and server in composition data.
- Add Client commands to aggregate and send messages.
MESH/SR/AGG/BV-02-C requires more key slots.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Includes Opcodes Aggregator Server and Client. To use Opcodes Aggregator
client features with some client model, that client should support async
API.
Co-authored-by: Ludvig Samuelsen Jordet <ludvig.jordet@nordicsemi.no>
Co-authored-by: Mia Koen <mia.koen@nordicsemi.no>
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds support for private beacon sending and receiving.
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add test that sends longest possible PDU with slowest possible timings
and default retransmission values.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Test that a maximum length SDU can be processed with SAR
with "stressed" transmitter and receiver configurations.
Signed-off-by: Stine Akredalen <stine.akredalen@nordicsemi.no>
Add Transport SAR Configuration models to shell.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add support for:
- SAR Configuration Client and Server models
- Transport SAR configuration states
- Using SAR Transmitter/Receiver states in segmentation
and reassembly process.
Bsim tests fixes:
- Fix failing replay attack test. The replay attack test doesn't
consider retransmission attempts at the transport layer. When
retransmission happens, SeqNums get increased and the test logic
doesn't work anymore. The simplest fix would be to disable
retransmissions at the transport layer.
- Add device synchronization API to synchronize transport va test.
Device configuration may take different time on transmitter and
receiver. Add synchronisation barrier between devices.
- Fix msg_frnd test. Timing in transport sar behavior has been
changed, which affected test_friend_msg test. Now acknowledgments
are sent much faster and this needs to be considered in the test.
- Fix unicast_low_lat test. Increase number of retransmission
attempts when long segmented message is sent.
- Reduce timeout in kr_old_key test.
- Relax SAR RX state configuration in DFU and BLOB tests.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Co-authored-by: Anders Storrø <anders.storro@nordicsemi.no>
Co-authored-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
- Adds Large Comp Data Server and Client
- Defines some dummy metadata for Health Server
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
- Adds Large Composition Data Server and Client definitions
- Adds Client API definition
- Adds Health Server Metadata definition
- Refactors Composition Data processing (as a Server) to use common
methods with Large Comp Data Server
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Co-authored-by: Stine Akredalen <stine.akredalen@nordicsemi.no>
Co-authored-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Test Dev Key Refresh, Node Composition Refresh and Node Address Refresh
procedures for robutness.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds commands in the mesh shell for remote provisioning client
operation, including scanning, provisioning and reprovisioning.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds remote provisioning models rpr_srv and rpr_cli, and exposes them as
a bearer for the provisioning process.
The remote provisioning models provide the following features:
- Remote provisioning of new devices, using a remote provisioning server
as a proxy.
- Reprovisioning of existing devices, generating a new device key and
changing addresses and composition data.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Composition data page 128 represents the new composition data after a
composition refresh procedure. The implementation stores the old
composition data (before applying a DFU or similar), and uses that as
page 0 if present. As the device has already rebooted by the time page
128 becomes active, its active composition data is page 128, while the
backed up data is the "old" data, which should be shown as page 0.
Co-authored-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This commit adds several BabbleSim tests for BLOB transfer:
- A sanity test checking that BLOB Transfer completes successfully in
both, Push and Pull modes that runs transfer for 4 targets
- blob_cli_trans_resume test for Pull mode
- Test checking that BLOB client continues BLOB transfer if one of
targets times out while sending chunks.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add a test where distributor is a single target and performs self
update. Add a test where distributor performs self update with multiple
targets.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Check that DFU client continues DFU procedure as long as there is at
least one active target.
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
- Tests that BLOB Client suspends if no target responds to Block get.
- Tests that BLOB Client transfer ends if no target responds to Xfer
get.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Tests that BLOB Client continues the Push BLOB Transfer procedure
as long as there is at least one active target.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
This commit implements the following tests:
- Test that DFU finishes successfully with all different effects;
- Test that DFU fails at confirm step with all different effects;
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add bsim test for resuming push & pull mode transfer on the BLOB client
after BLOB server has been suspended during initial attempt.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
This updates some of the defaults in the mesh shell's config to allow
various Mesh 1.1 models to be used in the shell.
EPA provisioning and DFU requires much larger multisegment messages,
therefore support for maximum sized message is enabled by default and
stack sizes are increased working values.
Additionally, log buffer is increased and thread sleep time is reduced
to avoid dropping of useful logs.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds conditional support for the BLOB and DFU models in the mesh shell.
Additionally creates a dummy BLOB stream for testing.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Co-authored-by: Anders Storrø <anders.storro@nordicsemi.no>
Co-authored-by: Ludvig Samuelsen Jordet <ludvig.jordet@nordicsemi.no>
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Co-authored-by: Mia Koen <mia.koen@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds support for the Device Firmware Distribution Server model from Mesh
Model specification v1.1.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Co-authored-by: Ludvig Samuelsen Jordet <ludvig.jordet@nordicsemi.no>
Co-authored-by: Anders Storrø <anders.storro@nordicsemi.no>
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Co-authored-by: Mia Koen <mia.koen@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds DFU models from the Mesh Model specification v1.1.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Co-authored-by: Anders Storrø <anders.storro@nordicsemi.no>
Co-authored-by: Mia Koen <mia.koen@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds support for the BLOB Models from Mesh Model specification v1.1.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Co-authored-by: Anders Storrø <anders.storro@nordicsemi.no>
Co-authored-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Co-authored-by: Ludvig Samuelsen Jordet <ludvig.jordet@nordicsemi.no>
Co-authored-by: Mia Koen <mia.koen@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Implementation of the enhanced provisioning authentication (EPA)
that is based on SHA256 and HMAC security algorithms.
OOB authentication mandates EPA usage.
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add ability to run bsim mesh for both ble mesh versions
v1.0.1 and v1.1
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
All mesh 1.1 features are gathered behind a KConfig options.
Default is disabled.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add a callback similar to net_recv that notifies the application when a
message is received in access layer. This is is useful for testing
purposes (especially automated testing).
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
This prevents a Configuration Client from binding an app key to a model
that only supports DevKey-based security.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Mesh Profile Specification Errata 11341
3.6.4.3 Message error procedure
When the Upper Transport layer receives a message that is not
understood, then the message shall be ignored.
A message that is not understood includes messages that met one or more
conditions listed below:
• The Transport Control message opcode is unknown by the receiving node.
• The Transport Control message size for the Transport Control opcode
is incorrect.
• The Transport Control message parameters contain values that are
Prohibited
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
