Commit 447a492 switched to `sys_cache*` to enable caches at SoC init. To
preserve the old behavior of enabling caches at init, is missing to
select `CONFIG_CACHE_MANAGEMENT`.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Since d992683db5 (soc: arm: replace redundant config option for
caches for nxp_imx), RT1xxx series will not have cache enabled at boot
unless CONFIG_CACHE_MANAGEMENT=y. Since this will improve performance,
enable CONFIG_CACHE_MANAGEMENT by default.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Gigadevice was inconsistent with the convention established by other SoC
families, that is, use <vnd_prefix>_<family>. For example, ST STM32 uses
st_stm32. Note that GD32VF103, under soc/riscv, has already been
adjusted.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Use sys_cache* functions to enable the caches for stm32f7 and
stm32h7. This ensures that CONFIG_CACHE_MANAGEMENT is
considered correctly.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Use the sys_cache* functions to enable the caches on same70 and
samv71. This will ensure that CONFIG_CACHE_MANAGEMENT is
considered correctly.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Remove the redundant cache config options for kv5x and use
the sys_cache* functions to enable the caches. This will automatically
consider CONFIG_CACHE_MANAGEMENT.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Replace the redundant cache config options for the nxp_imx and
use sys_cache* functions to enable the caches. These will automatically
consider CONFIG_CACHE_MANAGEMENT.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Use sys_cache* for enabling the caches in nxp_s32. This automatically
considers CONFIG_CACHE_MANAGEMENT and will activate the
cases only if this is active.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
S32K1xx devices have a maximum of 3 FlexCAN peripherals. Each part may
define a different maximum number of instances and message buffers,
hence the interrupt lines are defined in the part specific dts.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
When Power Management is enabled (CONFIG_PM=y),
the CONFIG_IDLE_STACK_SIZE of 320 is not enough :
Increase its size to 512.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The defconfig.series file for the stm32f4 incorrectly redefines
the PM Kconfig in order to select two dependencies, COUNTER and
COUNTER_RTC_STM32_SUBSECONDS, instead of setting a default for
them if PM is included.
This commit fixes the error described above.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Added GPIOTE0, GPIOTE1 instances for legacy devices,
GPIOTE20, GPIOTE30 for Moonlight and GPIOTE130,
GPIOTE131 instances for Haltium.
Signed-off-by: Jakub Zymelka <jakub.zymelka@nordicsemi.no>
Give option in soc.c to initialize the MIPI DPHY clock from the default
AUX1_PLL, or from the FRO using CONFIG_MIPI_DPHY_CLK_SRC_FRO.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
The previous implementation of the sys_arch_reboot function
for the Atmel SAM series was using NVIC_SystemReset.
This caused a reboot time of around 20 seconds on a SAM4SA16CA,
which is now reduced by directly writing to the
reset controller control register (RSTC_CR).
Signed-off-by: Jaro Van Landschoot <jaro.vanlandschoot@basalte.be>
Co-authored-by: Gerson Fernando Budke <nandojve@gmail.com>
Add SOC definition for MK22F12 series, larger LQFP-144 K22 series
parts that feature additional peripheral instances.
Additionally, these parts differ from the standard MK22 in the following
ways:
- SYSMPU peripheral is present, so an MPU definition is required
- No external oscillator divider is present
This commit also updates the NXP HAL to include pin control files for
these SOCs.
Signed-off-by: Daniel DeGrasse <daniel@degrasse.com>
Supporting Stop1 mode while BLE RF is enabled requires some specific
adaptation and usage of STM32WBA Cube BLE controller scm API.
scm (Secure clock manager) is in charge of switching clock depending
on RF status and should be informed of PM stop modes scheduling.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
STM32WBA controller uses a PKA driver to perform cyphering operations
on keys. Since PKA hardware block requires RNG clock to be enabled, a
synchronization with zephyr RNG driver is needed.
Use RNG enable status to check if RNG could be switched off or needs to
be switched on.
Similarly in entropy driver, don't cut RNG clock if PKA is enabled.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Kconfig options with a HEAP_MEM_POOL_ADD_SIZE_ prefix should be used to
set the minimum required system heap size. This helps prevent
applications from creating a non-working image by trying to set a too
small value.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In order to enable BLE support on STM32WBA, following APIs are implemented:
- HostStack_: BLE Controller scheduling
- ll_sys_: Link layer API required for scheduling
- UTIL_TIMER_: BLE Controller timer utility
- LINKLAYER_PLAT_: BLE controller utilities
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Currently on zephyr, RAIL library is used only by Bluetooth applications,
with this update, it will be able to be used for sample applications
for custom radio phys.
All files were copied from Silicon Labs GSDK v4.2.4.
Signed-off-by: Zoltan Havas <zoltan.havas@silabs.com>
The STM32F722 is similar to the STM32F723, but lacks the latter's
more advanced USB PHY. Otherwise, they are virtually identical.
Signed-off-by: Evan Perry Grove <evan@4grove.com>
The STM32 G4 series has a built-in Arm Instrumentation Trace
Macrocell. Set CONFIG_HAS_SWO to enable this.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Configure the SYS_CLOCK_TICKS_PER_SEC directly from the
DTS st-prescaler property of the lptim node
aka stm32_lp_tick_source
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The instruction cache in the STM32F7 and H7 was enabled regardless
of the value assigned via Kconfig to the CONFIG_ICACHE parameter.
This commit adds the missing conditional checks; note that this does
not affect the compiled behavior unless CONFIG_ICACHE is explicitly
disabled by the user.
Remove a redundant low-level check on DCache being already enabled,
since it is also performed inside the SCB_EnableDCache function.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Use the already available in the tree mechanism of adding assembly
instructions right after WFI/WFE to implement the workaround for
nRF5340 anomaly 168 (replace the 4 NOP solution used on the network
core as it turned out to be insufficient) and provide two related
Kconfig options so that users are able to adjust the workaround to
their actual needs (disable it entirely or use it in the extended
version).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This patch adds definitions for the nRF9151,
which is software-compatible with nRF9161.
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
Enable the TF-M NS storage partition for nordic boards.
This partition is otherwise not used, and configured as secure.
Fixes: #59376
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Currently Code Cache cannot be enabled because its initialization is
guarded by Kconfig options which depend on CPU core cache support,
but S32K14x devices has a SoC specific L1 cache controller. Hence,
introduce a SoC-specific symbol to enable Code Cache.
Note that the cache controller is not available for S32K11x devices.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Update the Kconfig for the npcx eSPI driver so it's automatically
enabled if the devicetree node is enabled.
Signed-off-by: Keith Short <keithshort@google.com>
GCLK Gen 2 was dedicated to USB, but never setup... this patch
configures it for 48 MHz, derrived from DFLL.
Signed-off-by: Attie Grande <attie.grande@argentum-systems.co.uk>
