Make sure the property specs answered by the Binding.prop2specs API
do not all claim (PropertySpec.path) they were last modified
by the top-level binding.
Signed-off-by: Christophe Dufaza <chris@openmarl.org>
add gpio_intel driver with acpi based resource enumeration support.
Also updated test cases overlay with new dts entires.
Signed-off-by: Najumon B.A <najumon.ba@intel.com>
The commit "drivers: ethernet: dsa_ksz8xxx: use
NET_DEVICE_DT_DEFINE_INSTANCE"
(SHA1: f78a081066) replaced
NET_DEVICE_INIT_INSTANCE() with NET_DEVICE_DT_DEFINE_INSTANCE() to
facilitate the removal of deprecated (from Zephyr's 3.2 release)
DT_LABEL() macro.
Unfortunately, the per LAN port initialization is necessary for correct
operation of the DSA driver - otherwise following errors were visible
when LLDP DSA sample (samples/net/dsa/src) was run on ip_k66f board:
<wrn> net_if: iface 0x20001440 is down
<inf> net_dsa_lldp_sample: LLDP pkt recv -> lan1
<inf> net_dsa_lldp_sample: CHASSIS ID: 38:05:43:69:XX:ZZ
<inf> net_dsa_lldp_sample: PORT ID: 38:05:43:69:XX:ZZ
<inf> net_dsa_lldp_sample: TTL: 120s
<inf> net_dsa_lldp_sample: SYSTEM NAME: mtt
<err> net_dsa_lldp_sample: Failed to send, errno 115
The fix is to use again NET_DEVICE_INIT_INSTANCE() with "lan"X name
assigned (to avoid too long names when recommended DT_PROP() is
used instead of DT_LABEL()).
Fixes: f78a081066
Signed-off-by: Lukasz Majewski <lukma@denx.de>
The STM32L152C-DISCOVERY is a development board based on the STM32L152RC
MCU. It is very similar to the stm32l1_disco, which was used as a
reference for the pinmux and defconfig.
stm32l152c_disco board has 256 Kbytes of flash memory, 32 Kbytes of RAM
and 8 Kbytes of data EEPROM.
Signed-off-by: Maxin John <maxin.john@gmail.com>
RISCV_PRIVILEGED implicitly depends on INCLUDE_RESET_VECTOR.
Remove that dependency by adding support for SoCs that
do not need the `__reset` stub.
Signed-off-by: Marcin Szymczyk <marcin.szymczyk@nordicsemi.no>
43de309b3e made a buffer leak.
It was not detected by this test.
Add another configuration, where the final buffer is sent without
fragments in order to exercise the leaky code path.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This is useful if we want to paste a list of multiple command or add
long advertising data for example.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
For more effective code execution on STM32 devices is convenient
to enable flash prefetch buffer.
To be enabled by default, possible to disable using kconfig.
Signed-off-by: Lubos Koudelka <lubos.koudelka@st.com>
If compiling with optimizations (-O2/-Ofast) gcc emits a
maybe-uninitialized warning for `size`.
As far as I can tell, `size` will always be initialized in the cases
where it is used and only left uninitialized in error cases.
Reproduced on main with the multi_endpoint sample on
nrf5340dk/nrf5340/cpuapp.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
When initially reading some of the host code it was unclear
to me why they were needed an how they are used.
By adding some documentation, this can hopefully make it
easier for others to understand these.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Add POSIX FD_MGMT option and mark ftruncate as supported
in POSIX Option group Documentation
Signed-off-by: Karthikeyan Krishnasamy <karthikeyan@linumiz.com>
ftruncate should return -1 on errors and it needs to
set appropriate error values in errno
Signed-off-by: Karthikeyan Krishnasamy <karthikeyan@linumiz.com>
Fixes warnings when building documentation due to additional SoC
names being part of the Kconfig symbols which they should not be
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
By default, the generated disassembly file (i.e: the .lst
file) also contains inline source code. This has the
potential to become problematic when attempting to compare
the generated .lst files accross platforms since they may
differ for various reasons. As such, add the option to
control whether the disassembly file should contain inline
source code or not.
The need for this patch was sparked by the differences
observed in the generated .lst file for Linux and Windows
in one of SOF's CI jobs (details in thesofproject/sof/issues/9034),
which were caused by the addition of the inline source code.
With this, we can keep testing for reproducible builds while
not having to deal with differences in the .lst files caused
by things such as having ".." include paths.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
UBSAN reports a bogus error in this function:
"load of address x with insufficient space for an
object of type '<unknown> *'"
as it seems unable to determine the size of
test_installers.
Let's disable this check in this function.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Provide a macro to set the no undefined sanitizer
attribute in symbols.
To allow skipping its checks/modifications in symbols
in which it is known to either cause trouble or report
false positives.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
UART error may be reported with random timing
from either UART in configuration mismatch case.
The test case is now aligned to such behaviour.
Signed-off-by: Bartosz Miller <bartosz.miller@nordicsemi.no>
Commit 89679cd975 replaced hard-coded alignment with a define,
but a regression was introduced with a missing SUBALIGN.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The ace20 description has incorrect number of SSP instances
described. Correct number should be 3.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
The ace15 description has incorrect number of SSP instances
described. Correct number should be 3.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
The tgph description has incorrect number of SSP instances
described. Correct number should be 3.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Added test for archs that support it. It triggers an exception
and verify that the fatal message has stack unwind info.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Influenced heavily by the RISCV64 stack unwinding
implementation in the Linux kernel.
`CONFIG_RISCV_EXCEPTION_STACK_TRACE` can be enabled by
configuring the following Kconfigs:
```prj.conf
CONFIG_DEBUG_INFO=y
CONFIG_EXCEPTION_STACK_TRACE=y
CONFIG_OVERRIDE_FRAME_POINTER_DEFAULT=y
CONFIG_OMIT_FRAME_POINTER=n
```
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Add an I3C shell. This includes support of all I3C CCC commands that
currently have helper functions implemented. This also includes all
the read/write shell commands that the i2c shell supported. An Info
command is also provided which will print out all i3c and i2c info
of an i3c bus. Only SDR read/writes are currently implemented.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Use 'runner_params' specified in hardware map YAML file. This allows to
configure custom params (like openocd's adapter configuration for
FT232-based probe) when used with pytest harness.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Updates the linker script fragments under 'drivers' to use
Z_LINK_ITERABLE_SUBALIGN for the subalignment instead of
a hardcoded value of 4.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Updates the linker script fragments under 'subsys' to use
Z_LINK_ITERABLE_SUBALIGN for the subalignment instead of
a hardcoded value of 4.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Updates the linker script fragments under 'samples' to use
Z_LINK_ITERABLE_SUBALIGN for the subalignment instead of
a hardcoded value of 4.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Updates the linker script fragments under 'tests' to use
Z_LINK_ITERABLE_SUBALIGN for the subalignment instead of
a hardcoded value of 4.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
The macro Z_LINK_ITERABLE_SUBALIGN is used by linker scripts to
select the default subalignment based on whether it is 32/64-bit
architecture. 64-bit architectures set the default subalignment
to 8, while 32-bit architectures set it to 4.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Updates the log_source_dynamic_data structure to be a multiple of 8
bytes in size on 64-bit platforms.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Updates the test_ram/test_rom structures to use a 'long' instead
of an 'int' so that the structure sizes will be 4-bytes on 32-bit
platforms and 8-bytes on 64-bit platforms.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
