WiFi scan results were not updated with information about channel, after
scan results parsing was updated. Fix that.
Fixes: a6b06004c2 ("drivers: wifi: esp_at: handle commas in SSIDs during
scan and status")
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
There's no way this log level was intentional: this line is just the
title / prefix of a multi-line section with mostly LOG_INF statements.
Fixes commit 6423bc3bc8 ("drivers: dai: intel: ssp: Improve logging
output") which was very large hence error-prone.
Fixes SOF bug https://github.com/thesofproject/sof/issues/9026
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Since the minimum/maximum supported bitrates are now stored in the common
CAN controller driver configuration struct, retrieving these can no longer
fail.
Add new CAN controller API functions can_get_bitrate_min() and
can_get_bitrate_max() reflecting this and deprecate the existing
can_get_min_bitrate() and can_get_max_bitrate().
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Previously the logic was inverted for error_callback_en where 0 was
enablement and 1 was disable. This was likely done so that the default,
sensibly so, was to enable the error callback if possible. A variety of
in tree users had confused the enable/disable value.
Change the name of the flag to error_callback_dis where the default
remains 0 (do not disable the callback!) and correct in tree uses of the
flag where it seemed incorrect.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Currently you have to manually type out the device name for each command.
This commit adds support for <device> entry tab completion and device
lookup if help is enabled.
Signed-off-by: Hans Binderup <habi@bang-olufsen.dk>
DisableDeepSleepIRQ() disables the NVIC irq, while PINT need it to fire an
event when the interrupt is used. So while the interrupt is not used in
DeepSleep mode, it should still be available to be used.
Signed-off-by: Hessel van der Molen <hvandermolen@dexels.com>
Fixes the issue of CAN failing to exit sleep mode
inside can_stm32_init() when a software reset is done.
For stm32 the CAN is first made to enter initialization
mode first and then made to exit the sleep mode.
Signed-off-by: Aditya Ganesh <adityaganesh2k@gmail.com>
The adc_ads1119 driver is unable to overwrite the configuration register,
the chip therefore always works with its default settings. Register access
macros are fixed by this commit.
Fixes: #70091
Signed-off-by: Jan Kubiznak <jan.kubiznak@deveritec.com>
CSS was deprecated from the mcu-sdk. Removing driver from lpc55s36
to clear build error.
This is a temporary patch to remove the build error.
Fixes#69961
Signed-off-by: David Leach <david.leach@nxp.com>
All connect() syscalls result in EISCONN error, since underlying
_sock_connect() is attempted to be called twice. Once from net_context.c'
bind_default() (with INADDR_ANY) as part of esp_bind() and second time as
part of esp_connect().
Do not call _sock_connect() from esp_bind(INADDR_ANY), which happens as
part of connect().
Fixes: dbf3d6e911 ("drivers: esp_at: implement bind() and recvfrom() for
UDP sockets")
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
zsock_poll_internal() iterates through all fds to call
ZFD_IOCTL_POLL_UPDATE on them. In cases when -EAGAIN is returned from one
of such syscalls (which happens for example for TLS sockets when in the
middle of a TLS handshake) whole fds array is iterated once again. This
means that ZFD_IOCTL_POLL_UPDATE can be called more than once for a single
preceding ZFD_IOCTL_POLL_PREPARE operation. This resulted in error in
nsos_adapt_poll_remove() call, which was not intended to be called twice.
In case ZFD_IOCTL_POLL_UPDATE is called second time, update 'revents' just
by calling poll() syscall on the host (Linux) side with 0 timeout.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
From IMXRT1170RM.pdf, iomuxc_gpr->GPR17 is
used to configure FlexRAM bank 0~7.
iomuxc_gpr->GPR18 is used to configure
FlexRAM bank 8~15.
Set low 2 bytes to iomuxc_gpr->GPR17.
Set high 2 bytes to iomuxc_gpr->GPR18.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Make use of sensor_ug_to_ms2() and sensor_10udegrees_to_rad() APIs
to convert from raw values into proper units (i.e. m/s^2 for accel
and rad/s for gyro).
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Apparently there was a typo in the last commit.
Looks like it was refactored without trying to build.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Use the most adapted instruction for the sector erase command
It can be 0x20 or ox21 or 0x21DE in octo - DTR mode.
The value is given by the SFDP table and filled in the erase_types
table the during the SFDP discovery process.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The commit adds dependency on Kconfig FLASH_PAGE_LAYOUT to subsystems
that really require it:
FCB, NVS, LittleFS
and removes direct selection from '*.conf' files where no longer
needed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
If a clock control device is set in the `clocks` property,
it is used to determine the frequency.
If `fixed-clock` is set for the clocks, we use that value as is.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Introduce the `COMPAT_SPECIFIC_...` macros to determine the function name
from the compatible name.
These macros allow the isolation of device-dependent code in a generic way.
For example, if the compatible name is `ambiq,uart`,
The `COMPAT_SPECIFIC_DEFINE` macro is replaced by `AMBIQ_UART_DEFINE`.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Removing dependency on cyhal in airoc wifi driver.
It need to build airoc wifi driver with different than
PSoC 6 Soc like STM32
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
The nRF IEEE 802.15.4 driver might report a received Ack frame with
invalid timestamp, if the timestamp could not have been taken. The upper
layers are not prepared to handle such a case as they expect that for a
received frame, the timestamp is always present and valid.
This commit detects this situation and handles it gracefully by
reporting the transmission as failed as if no Ack was received.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Implement a sensor for the output diagnostics of the power train
switch TLE9104.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
When running the cdc_acm demo on a board with an external ULPI
phy, the device is unable to enumerate:
usb 1-1.8.3.1: new full-speed USB device number 51 using ehci-pci
usb 1-1.8.3.1: device descriptor read/64, error -32
usb 1-1.8.3.1: device descriptor read/64, error -32
the console shows:
[00:00:00.001,000] cdc_acm_echo: Wait for DTR
[00:00:00.007,000] usb_cdc_acm: Device suspended
[00:00:00.902,000] usb_cdc_acm: Device resumed
[00:00:00.902,000] usb_cdc_acm: from suspend
[00:00:25.526,000] usb_cdc_acm: Device suspended
By not disabling the ULPI clock in low power, the usb enumeration
is working and we can run the cdc_acm demo. While touching
this code, add some comments to clarify the macro nesting.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
This commit enables pinctrl on i.MX8ULP. This includes:
1) Adding `pinctrl_soc.h` header file.
2) Adding DTS node for IOMUXC1, which is one of the
IPs responsible for managing the 8ULP pads.
3) Adding .dtsi with pin definitions. For now, only
the LPUART7 pads are added to this file because this
is going to be the only consummer for now.
4) Modifying the `pinctrl_imx.c` driver to work for 8ULP.
5) Enabling the `CONFIG_HAS_MCUX_IOMUXC`, which is a
dependency of `CONFIG_PINCTRL_IMX`.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Currently, when using the `pinctrl_imx.c` driver one has
to manually enable `CONFIG_PINCTRL_IMX` even if the pinctrl
node using the driver is enabled. This is redundant and prone
to error as one would expect the driver to be enabled when
the node is also enabled.
This commit fixes the issue by enabling `CONFIG_PINCTRL_IMX`
by default and adding a new dependency on the state of the
pinctrl node (i.e: node needs to be enabled for the configuration
to also be set to `y`).
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Add PWM instances found on nRF54H20 and nRF54L15 devices,
so that PWM driver can be utilized on these.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
The valid range of hdop (horizontal diffusion of precision) goes
from 0-100000, but because we are using a uint16_t, we truncate
anything above UINT16_MAX.
This fix changes the size of the hdop member to a uint32_t, which
allows us to capture valid (but admittedly very poor) readings.
Signed-off-by: Rob Newberry <rob@zenomoto.com>
Moves a Kconfig that appears everywhere in the wrong place so that
it is enclosed if if statment check, so it only shows for device
that have the driver enabled
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
- update the console configuration defines references
- add missing header file with flash capabilities
- replace all console wait-until-ready calls by single one
Signed-off-by: Marek Matej <marek.matej@espressif.com>
The LL_APBx_GRPn_ReleaseReset clears reset bit in RCC,
however this bit is reset by default. Code that set
this bit was removed in previous commit
0856e99155
Keepint the autonomous clocks for STM32U5 family.
Signed-off-by: Adam Berlinger <adam.berlinger@st.com>
Magic constants throughout the code made this difficult to reason about,
especially with two different units of measurement (bytes and words) at
play.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
The RX FIFO size is in words, so needs to be subtracted from the total
memory size *after* it's divided by 4.
Fixes#70789.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Add driver for ST7796s display. This is a MIPI DBI display controller,
with a frame memory of 320x480x18 pixels. Support for 4 wire SPI mode is
implemented using the MIPI DBI API.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Warn about potential device tree errors for cases when driver's
client tries to configure a pin as GPIO but which is not
in GPIO mode.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
It is impossible to perform flash reads during a flash write. When the
data to write to flash lies in the flash itself, it is buffered in ram
before writing.
Signed-off-by: Lukas Gehreke <lk.gehreke@gmail.com>
Move providing of the first buffer in uart_rx_enable from that
function to the callback which is called from nrfx_uarte_rx_enable
context. By doing this nrfx_uarte_rx_buffer_set is called when
RX configuration flags are already known to the driver.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Provide support for reading events longer than 127 bytes in
ST SPI protocol v1 by splitting them into several SPI transactions.
Signed-off-by: Ali Hozhabri <ali.hozhabri@st.com>
Introduce NXP LCDIC driver using MIPI DBI class. This peripheral
supports 8080 and SPI 3/4 wire mode, although only SPI 4 wire support is
currently implemented. The driver supports DMA and interrupt driven
transfers.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The soc_secure_* function are used by the non-secure application
to access hardware resources which are mapped as secure.
Using these functions for hardware resources mapped as non-secure
is missleading.
We have some soc_secure_* functions which read FICR values.
In nRF91 and nRF53 platforms this made sense since FICR
has hardware fixed mapping as secure.
For nRF54 though the FICR has hardware fixed mapping as non-secure.
This change refactors the soc_secure.h to exclude the functions
which read FICR values from being included when FICR is mapped as
non-secure.
Also updates the hwinfo and ieee802154 drivers to adjust to this change.
Signed-off-by: Georgios Vasilakis <georgios.vasilakis@nordicsemi.no>
Adds an option that allows for locking all interrupts when reading
the data from this sensor, this can be used alongside systems like
Bluetooth to vastly increase chances of getting a reading from the
sensor successfully, at the risk of losing Bluetooth packets.
Signed-off-by: Jamie McCrae <spam@helper3000.net>
User is able to enable packet capture for low level HDLC data
frames received from and sent to network. This data can sent to
remote system for analysis. The captured data is encapsulated
into Linux cooked mode SLL packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Improve code consistency and fix CONFIG_POSIX_API=n compatibility with use
of ZSOCK_* and DNS_* macros.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
The initial version of an input driver for Cirque Pinnacle ASIC supports:
* Setting sensitivity
* Choosing between relative and absolute modes
* Relative mode
* Primary tap
* Swapping X and Y
* Absolute mode
* Setting number of idle packets
* Clipping coordinates outside of active range
* Scaling coordinates
* Inverting X and Y coordinates
Signed-off-by: Ilia Kharin <akscram@gmail.com>
To prevent postponing data flush until filling fifo. Now the flush will
occur at the scheduled time, regardless of subsequent poll_out reqs.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
A few lines above this change explicitly enable the UART FIFO. Then this
line, goes and disables it. This seems to be from a workaround where the
parity and stop bits are not coming in correctly in the config. Fixing
that will be another patch. But, the FIFO should always be enabled. This
is visible when trying to use bit rates that are reasonably fast. Even in
IRQ mode, with a sufficient bit rate, bytes are readily dropped.
Tested on a Sparkfun Promicro rp2040 board.
Signed-off-by: David Brown <david.brown@linaro.org>
Automatically select CONFIG_GPIO when the GPIO-controlled CAN transceiver
driver is enabled. Update board configurations to benefit from this.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Cf Errata sheet, 2.2.4: With HSE active, switching the system clock source
from any other source to HSI, spuriously deactivates HSE.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
In case of chain loaded application with PLL set as the sysclk source,
directly exit the init function.
This also applies to exit from stop mode and was tested successfully.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
For now DSI settings are hard-coded for the specific
LCD module used on the STM32H747I Discovery board
Signed-off-by: Erik Andersson <erian747@gmail.com>
To support the NT35510 display, some additional
options needs to be configurable in the STM32
DSI peripheral
Signed-off-by: Erik Andersson <erian747@gmail.com>
The Low Power Flexcomm driver manages the interrupt handling
and provides an API to register interrupt callbacks.
Register the NXP LPI2C interrupt handler.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Update the driver to account for variations in the SDK driver
when it uses the instance number instead of the base address.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
LPFlexcomm is a MFD device hence select this Kconfig whenever
it is enabled.
Remove the selection from the individual driver Kconfig files.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
On some boards, there is not dedicated reset pin for GT911, it might
be the same pin with display IC, or might be tighted to a high level
voltage.
This patch makes the rst_gpio can be empty.
Signed-off-by: Jason Yu <zejiang.yu@nxp.com>
Add support for performing pinctrl operations. For now,
the only supported operation is applying the pinctrl default
state. Pinctrl is left optional to allow for scenarios in which
this is not required (e.g: AMP system in which another
OS configures the pinctrl).
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Add a property to select the push-pull GPIO output type to drive the
I2C recovery. The default is open-drain.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
This patch add supports for performing clock-related operations
on i.MX8ULP. This consists of:
1) Adding a LUT.
2) Adding an initialization function meant to tell the
HAL which rate the XTALs on the boards (EVK and EVK9)
run at. This is used by the functions that compute the
rate of an IP clock.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
In the case of some SOCs simply using the PCC base and clock
offset to build the clock ID passed to the HAL is not sufficient
since the clock ID may also contain some flags (e.g: see the case of
i.MX8ULP). For such SOCs, we change the semantic of the value passed
from the DTS (which is simply called "name", thus allowing us to
interpret it differently from SOC to SOC) to an index in a LUT
used to fetch the clock ID that can be safely passed to the HAL.
For compatibility reasons, we also keep the old way and use it
for SOCs which don't define such a LUT. The driver will decide
which method to use based on the LUT size (i.e: if 0, use the
old way, if != 0 use the new way).
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Change, for audio DSP and M7 cores, SOC_<name> to match
the exact soc name.
Update the board files accordingly.
These configs are used in SOF and NXP_HAL, so change
sha for these modules.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Rename ad5592 files in dts, driver and include to ad559x and add support
for I2C bus which is required for AD5593.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Run clang-format on qdec_stm32.c.
This moves '\' in macros to line index 100, which ensures '\' still
aligns if a macro is edited with a new line that is longer than the
previous longest line.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Negative temperatures were converted to the sensor_value struct
incorrectly.
This fixes the causes: signed/unsigned mixups and integer overflows.
Also clarified temperature calculation using multiplier/divisor config
values.
Fixes#68240
Signed-off-by: Boris Mulder <b.mulder@innoseis.com>
Based on the iis2dlpc driver, with some significant differences in
interrupt handling.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Add the invocation of an interrupt config function
(config->irq_config_func). Absence of this call results in the DMA
driver not being able to service interrupts raised by the DMA
peripheral.
This case was observed on the i.MX RT685's HiFi 4 DSP domain, where DMA
was not functional because of this.
Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>
Enable Transmitter Delay Compensation whenever the data phase timing
parameters allow it.
Fixes: #70447
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Remove broken support for Transmitter Delay Compensation from the Bosch
M_CAN backend driver.
Even if this was enabled via Kconfig, the TDC bit in the DBTP register set
during driver initialization is overwritten in can_mcan_set_timing_data(),
turning TDC off.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The VLAN packets are prepared in Ethernet L2 so no need to have
special handling in the driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The VLAN packets are prepared in Ethernet L2 so no need to have
special handling in the driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The VLAN packets are prepared in Ethernet L2 so no need to have
special handling in the driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The VLAN packets are prepared in Ethernet L2 so no need to have
special handling in the driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The VLAN packets are prepared in Ethernet L2 so no need to have
special handling in the driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The VLAN packets are prepared in Ethernet L2 so no need to have
special handling in the driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The VLAN packets are prepared in Ethernet L2 so no need to have
special handling in the driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The VLAN packets are prepared in Ethernet L2 so no need to have
special handling in the driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The VLAN packets are prepared in Ethernet L2 so no need to have
special handling in the driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Virtual LAN logic is now done in Ethernet L2 so no need to manipulate
VLAN packets in the driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Remove ethernet-fixed-link binding as it is redundant with the
phy bindings. Clearly, ethernet does not work without the L1
layer, which is a phy device, or an integrated mac/phy device,
and all of these things should be described properly in DT.
The schema did not even come with a compatible, meaning nodelabels
were hardcoded into the drivers, which is unacceptable.
- Remove the binding file for ethernet-fixed-link.yaml.
- Remove fixed link functionality from the nxp s32 gmac driver.
Since this functionality is already covered by the phy support,
it is redundant.
- Remove fixed link include from the s32 gmac binding.
- Remove fixed link include from the nuvoton numaker binding.
As far as I can tell the corresonding driver does not even
use it anyways, and I did not find any board with this device
that describes a "fixed link".
- Move the definition into the nxp,kinetis-ethernet binding
as the eth_mcux driver, which is already being deprecated,
does use this, contain the debt to the legacy driver.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Addresses an issue where attempts to transmit data fail.
The identified cause of this failure is the handling of the
`rx_irq_enable` and `tx_irq_enable` flags. The `else if` handling the
`tx_irq_enable` was replaced by an `if` so both flags can be true,
and both functions can be called. This fix was tested with the
`cellular_modem` example successfully.
Signed-off-by: Fabian Kainka <kainka@cognid.de>
Added configuration of long press reset functionality.
Includes ship/hibernate to wake debounce time and
disabled/one_button/two_button mode selection.
Signed-off-by: Andy Sinclair <andy.sinclair@nordicsemi.no>
Multicast rule as 01:00:00:00:00:00 is actually shadowing
broadcast rule, enabling broadcast packets to be received/forwarded
even if broadcast rule/filter is not set.
Set the multicast filter with an appropriate mask.
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
The DHT20 sensor is a temperature and humidity sensor that uses I2C to
communicate with a microcontroller. The DHT20 sensor is Aosong.
use standard crc
update description to add reference to AHT20 and AM2301B
clean code, use defines and bit manipulation
add dht20 to i2c test suite for build tests
update bit manipulation
use more defines instead of raw numbers
add bindings to allow aht20 or am2301b to be used in devicetree
in all 3 cases, the same dht20.c driver is compiled
Signed-off-by: Nathan Olff <nathan@kickmaker.net>
The Low Power Flexcomm driver manages the interrupt handling
and provides an API to register interrupt callbacks.
Register the NXP LPSPI interrupt handler.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Update the driver to account for variations in the SDK driver
when it uses the instance number instead of the base address.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Update EDMA driver for version 4
2. The DMAMux module is not always present. Use the
feature define to make this optional.
3. Use the EDMA_SetChannelMux API for SoC's that supports
this feature.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
The ILimCntl name can be understood as both register name and its field
name. Therefore it is better to change macro name so it contains both
register and field name. Second field of this register will be also
utilized by this driver in the future and new code will be aligned to
this naming convention.
Signed-off-by: Lukasz Madej <l.madej@grinn-global.com>
Fix validation of `linear_range_get_index()` results.
The function can resturn both 0 or -ERANGE but -EINVAL is never
returned. Use comparison against 0 to make the validation robust.
Use valid maximum index for the linear range. The 0x0C is reserved
value and should not be used. Therefore replace it with 0x0B.
Signed-off-by: Lukasz Madej <l.madej@grinn-global.com>
`max20335_get_constant_charge_current()` and
`max20335_set_chgin_to_sys_current_limit()` functions has redundant input
values validation. Drop not important ones to make the code clean.
While on it remove `max20335_get_constant_charge_voltage()` function
since it become useless.
Signed-off-by: Lukasz Madej <l.madej@grinn-global.com>
Maximum charging current is selected with an external resistor in
the MAX20335 charger. Therefore it is not possible to configure it
with software directly. There is only a capability to limit current
set with hardware but configuration of the limiter is not
straight-forward.
To reflect real functionality, drop usage of
`constant-charge-current-max-microamp` property as an required one and
use custom `chgin-to-sys-current-limit-microamp` instead.
Use enum in binding file to signalize improper values at compile time.
Drop support for `CHARGER_PROP_CONSTANT_CHARGE_CURRENT_UA` API property
since this cannot be handled.
The `max20335_get_constant_charge_current()` function become useless so
remove it.
Signed-off-by: Lukasz Madej <l.madej@grinn-global.com>
Currently, the driver supports only VGA resolution while 480x272 is
needed to match with the display resolution on i.MX RT10XX family.
Also, the current framerate is very low, about 3-4 fps without doing
anything else with the image buffers (just discarding them).
Rework the driver to address the low framerate issue as well as to add
support for 480x272 and 1280x720 resolutions.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Add missing fields to complete info struct to
chat script for Telit ME910G1. Also for test
suite modem bg95.
Signed-off-by: Jeff Welder <Jeff.Welder@ellenbytech.com>
Fix compiler errors and warnings that are issued when compiling this
driver for use without the optional interrupt facilities.
When interrupts are not enabled for any instance of this device,
there's currently a compiler error in gpio_xlnx_axi_pin_interrupt_configure
due to the function's header being located within the ifdef-block for
interrupt-driven operation.
Fully encapsulate the interrupt-related functions
gpio_xlnx_axi_pin_interrupt_configure, gpio_xlnx_axi_manage_callback
and gpio_xlnx_axi_get_pending_int with ifdefs checking for interrupt
mode inorder to remove compiler warnings caused by those functions
being always present so far, while not being used in the API function
pointer table when all instances of this GPIO controller are operating
in polling mode. This circumstance causes a "declared, but not used"
compiler warning for each of those functions.
Signed-off-by: Immo Birnbaum <mail@birnbaum.immo>
This config selects a variant of the HCI driver interface that spills
out host internals unto the drivers and even the Zephyr controller. It
will now be removed in favor of driver interfaces that hide the
internals of the host.
The new default is `CONFIG_BT_RECV_WORKQ_BT`.
Any references to the removed kconfig are refactored out.
Any out-of-tree driver using the removed interface can be easily adapted
by copying the following implementations into the driver as private
functions:
- `hci_driver.h:BT_HCI_EVT_FLAG_RECV_PRIO`
- `hci_driver.h:BT_HCI_EVT_FLAG_RECV`
- `hci_driver.h:bt_hci_evt_get_flags`
- `hci_raw.c:bt_recv_prio`
In combination these symbols function as a interface adapter. These
symbols will be removed in this PR in subsequent commits.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Rework the data scaling algorithm for the "deadzone" mode so that the
deadzone is subtracted from the input rather than from the output. This
makes the whole output range usable rather than making the output jump
from the center value to the minimum deadzone range.
This changes the calibration data structure as well so now all values
refer to the input data, which is more coherent.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This somehow worked without problems during the test runs, but we found a
corner case where this leads to an error.
Signed-off-by: Juliane Schulze <juliane.schulze@deveritec.com>
Add driver for Angst+Pfister O2 sensors FCX-MLD25 & FCX-MLD95 and maybe
more. Tested with FCX-MLD25.
Supports get O2 value, get status, and power management.
Note that in suspended power mode heating output is at 20 %, thus
probably not suited for a battery powered device.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Since there is only one consumer of the data stored in the buffers,
it is enough to have one read index variable which can be stored in
the data associated with the module and not in the buffer space (where
there is a read index for each buffer).
Additionally, we can safely assume that module works with small buffers
so 127 byte limit is enough. Based on that assumption completed flag
can be stored on a single byte together with write index. After this
change, control data for each buffer takes 1 byte (3 bytes previously).
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
There was a wrong order of conditions checking. First indexes were
compared and then completed flag was checked. It was possible that
after checking first condition context is preempted and new data
is written to the buffer and completed flag is set. In that case
both conditions are met but data added in preemption is dropped.
In order to avoid that completed flag must be checked first.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Return availability of free buffers after data is consumed. This
information may be important for the module using uart_async_rx to
schedule next reception if there is a new buffer available.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add buffer releasing to consuming function to allow better buffer
utilization since buffer is available earlier.
Note that releasing in claiming function is still needed as there
are cases when there are empty but completed buffers and those
need to be consumed in claiming phase.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Removing a field which was redundant. It was only incremented but
never read.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Use `pm_device_driver_init` to ensure that init is run correctly
regardless of the power state.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Byte value written to the device's
ERXFCON: ETHERNET RECEIVE FILTER CONTROL REGISTER
Sets the devices receive packet filter, optional. If not set
in device tree previous hard coded value`0xA3` is used.
Uni, multi and broadcast packets with valid CRC are accepted.
Signed-off-by: Dean Sellers <dsellers@evos.com.au>
MODEM_UBX: Adds Support for UBX Messages in Modem Subsystem.
GNSS API Supported: get_supported_systems, set_fix_rate, get_fix_rate,
set_enabled_systems, get_enabled_systems, set_navigation_mode,
get_navigation_mode.
Boards Tested: MIMXRT1062_FMURT6, VMU_RT1170.
Note: Partial support for U-BLOX Messages is provided as of now.
Signed-off-by: Sumit Batra <sumit.batra@nxp.com>
Signed-off-by: Mayank Mahajan <mayankmahajan.x@nxp.com>
The STTS22H is an ultralow-power, high-accuracy, digital temperature
sensor offering high performance over the entire operating temperature
range. This driver is based on stmemsc HAL i/f v2.3
https://www.st.com/resource/en/datasheet/stts22h.pdf
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Error check was incorrect, causing wait for complete
not to be done. This can result in emit stop not
working on writes because controller won't do the
stop if it is still busy processing transmit.
Signed-off-by: Mike J. Chen <mjchen@google.com>
There has been missing line initializing the hold pin,
which caused SPI NOR device init to fail with -ENODEV,
if property defining such pin has been present in device
definition.
Fixes#70661
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
As correctly pointed during the initial PR Review, when the MTU-size is
23 the effective payload that can be transferred is MTU-3 = 20. Thus,
this change to be consistent.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
arch_interface.h is for architecture and should not be
under sys/. So move it under include/zephyr/arch/.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add ability to set a wakeup counter in case OS Timer is
disabled in certain low power modes. Also add code to
compensate the tick value.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Make clock_control_on for STM32 behave the same as the HAL,
delaying after enabling peripheral clocks. Otherwise it may return
before the clock is actually enabled, causing subsequent writes to
peripheral registers to be silently ignored.
Signed-off-by: Kevin ORourke <kevin.orourke@ferroamp.se>
Optimize bit remapping in STM32 FDCAN driver by grouping consecutive bits.
Additionally, leverage shared bit mapping between MCAN_IR and MCAN_IE to
consolidate switch cases.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This commit conditionally masks out `gpio_dw_isr` to prevent a build
warning if none of the instances of this driver are connected to an IRQ.
Signed-off-by: Chen Xingyu <hi@xingrz.me>
Switch to using `DT_*IRQN` helpers for obtaining the IRQ number instead of
directly accessing the `irq` cell. This change ensures that the encoded
values for multi-level interrupts are correctly retrieved.
Signed-off-by: Chen Xingyu <hi@xingrz.me>
