autopts was updated to properly require support for Accept Filter List
in Auto Connection Establishment Procedure related tests. This patch
enabled support for it and adds required BTP support.
This was affecting following qualification test cases:
GAP/CONN/ACEP/BV-03-C
GAP/CONN/ACEP/BV-04-C
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This was affecting following qualification test cases:
GAP/SEC/SEM/BV-56-C
GAP/SEC/SEM/BV-57-C
GAP/SEC/SEM/BV-58-C
GAP/SEC/SEM/BV-59-C
GAP/SEC/SEM/BV-60-C
GAP/SEC/SEM/BV-61-C
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
We have single server but it can accept multiple connections so
keep same requirements for all connection attempts.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Update the macro prototype to explicitly require the length of the
desired user data. Update all in-tree usage of this macro.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Adds preprocessor ifdefs to reconfigure() in L2CAP tester application
depending on the KConfig option CONFIG_BT_L2CAP_ECRED
Fixes issue #40456
Signed-off-by: Johan Lundin <johan.lundin@nordicsemi.no>
If IUT is acting as a central device and peer lost bond we need
to re-pair to restore bond. PTS is not sending any WID for this
so bonding needs to be initiated implicitly by IUT.
This was affecting GAP/SEC/AUT/BV-25-C qualification test case.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Adds support for reading multiple variable length characteristics.
Previously read_multiple() always set the variable flag to false.
This is used by GATT/CL/GAT/BV-03-C.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
This allows to do directed advertising with peer address set to RPA.
To do this according to specification IUT must first read Central
Address Resolution characteristic to check if peer supports it.
This is affecting GAP/CONN/DCON/BV-05-C qualification test.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
bt_conn_unref() requires valid conn pointer but could be called with
NULL in case valid connection was not found in disconnect_eatt_chans().
Fixes#39851
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This allows to track security levels and check for lost bond of peer
peripherals.
This was affecting GAP/SEC/AUT/BV-21-C qualification test.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This allows for better control over IUT behaviour by Upper Tester.
PTS and TS require inconsistent behaviour in terms of how IUT should
return credits. Some tests require return on explicit UT request and
some require that IUT returns credits autonomously.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
In test cases MESH/NODE/TNPT/BV-04-C and MESH/NODE/TNPT/BI-01-C
the PTS is sending incomplete Seg Ack 3 times and in some cases we run
out of retransmit attempts before PTS sends complete Seg Ack. As a
workaround, increase Segment Retransmit Count to improve stability of
these tests.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
In some scenarios when there is a need for multiple re-transmissions of
segmented messages the default value of 2 seconds may be not enough.
In my experience this improves stability of Configuration Client tests
involving multiple PTS instances.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
This allows UT to reconfigure MTU of a channel and get notfied when
channel configuration changed.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
For ECFC L2CAP test we user overlay with disabled EATT and
bt_eatt_disconnect_one() is available only with EATT enabled.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
To test fallback to remaining bearers PTS might request IUT to
disconnect one of the connected EATT channels, while the others remain
intact. Test function must be added, because we cannot create L2CAP
server on EATT PSM and manage this server as normal and have EATT
enabled at same time.
This is affecting GATT/SR/GAW/BV-14-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
BTP change extended L2CAP_CONNECT command by ECFC flag, which determines
which connection procedure is used (non-enhanced or ecred). Now, only
this flag determines the procedure used, not number of requested
channels.
This was affecting L2CAP/ECFC/BV-25-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
To check security of connection in read_value() we need to actually
pass connection not NULL.
This is affecting GATT/SR/GAR/BI-11-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Removes all the dead ternary expressions in the mesh bluetooth tester.
Fixes#37983.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Some test cases require the IUT to respond with a certain error. To get
the stack to return this error to PTS the application needs to be
configured specifically for this test case.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Currently, with EATT enabled, when bt_gatt_read is called with multiple
handles first it'll try to use gatt_read_mult_vl, and if it fails
gatt_read_mult will be used to try again. Add option to skip
the gatt_read_mult_vl and use gatt_read_mult right away. This is needed
by tests that expect BT_ATT_OP_READ_MULT_REQ but support variable
lenght, thus don't return BT_ATT_ERR_NOT_SUPPORTED.
Removed fallback from read multiple vl to read multiple on
BT_ATT_ERR_NOT_SUPPORTED error.
This was affecting:
GATT/CL/GAR/BV-05-C, GATT/CL/GAR/BI-18-C, GATT/CL/GAR/BI-19-C,
GATT/CL/GAR/BI-20-C, GATT/CL/GAR/BI-21-C, GATT/CL/GAR/BI-22-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
GATT/SR/GAD/BV-03-C will read attr value, but we parse NULL
from `attr->read` which point to `attr_read` function.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Since Zephyr supports EATT, which is reflected in ICS GATT_2_3
(Enhanced ATT bearer Attribute Protocol Supported (L2CAP fixed EATT PSM
supported) and GATT_2_3a (Enhanced ATT bearer supported over LE)
in GATT tests preamble 4.2.1.4 (Setup EATT Bearer over LE) is used
instead of 4.2.1.2 (Setup ATT Bearer over LE). Let's enable
EATT by default, allowing to run almost all GATT tests without
additional overlay.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Align the capitalization of the term "Bluetooth Mesh" to Bluetooth mesh"
in the documentation. This is done to to match the new updated naming
convention done in Bluetooth SIG. In the upcoming spec versions, it its
used "Bluetooth mesh" with the lower case convention.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
The purpose of this PR is to automatically test the
host in the native environment.
It is used to simulate /dev/tty*, can replace by /dev/pts/*.
Also, device log will be output to stdio by default.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
In tests that expect returning error in response for l2cap
connection request we use predefined PSMs. This commit adds
check for required keysize (which will always return error,
as connection is not secure and key size will always be 0)
instead of setting security level 4 (which would return
insufficient authentication, not insufficient key size).
It also adds suport for PSM used in insufficient authorization
tests - choosing this PSM will set flag that triggers error
on channel accept.
This affects tests L2CAP/LE/CFC/BV-[10-15]-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Update the tester application to correctly reserve the number of bytes
needed for an L2CAP SDU.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
i is of uint type, so it'll never be negative. Thus, while loop
condition i >= 0 will always be true.
This patch also fixes issue with marking unused l2cap channels
as free by freeing only these that were marked as in_use by
get_free_channel(), and not all of them.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Fix bt_le_oob_set_legacy_tk excluded when Legacy OOB pairing is
supported. We still support legacy OOB when
CONFIG_BT_SMP_OOB_LEGACY_PAIR_ONLY is not defined.
It is only when we disable Legacy pairing that it is not included.
Check that the OOB data type is in fact Legacy OOB before calling
bt_le_oob_set_legacy_tk.
Log an error if the OOB type was not handled by the callback.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This information is useful to the automation framework when implementing
tests where the IUT is the provisioner and the test uses two PTS
instances.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
This change adds field to L2CAP connect command allowing to choose
ECFC in L2CAP connect() function and adds required logic to perform
such connection.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Change to use the BT_ATT_FIRST_ATTTRIBUTE_HANDLE and
BT_ATT_LAST_ATTTRIBUTE_HANDLE instead of the literal values where
applicable.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This reverts commit 24784b1452.
The change appears to have been submitted twice in different PRs.
The correct change is: 76789883e2
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
L2CAP channels are allocating buffers from common data_pool. For that
pool buffer count was hard-coded as 1. This count should be set to value
CHANNELS, allowing each channel to allocate buffer for incoming
data. Without this change, execution would stuck at l2cap_chan_le_recv()
as we give net_buf_alloc() in alloc_buf_cb() no timeout.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
In the function conn_param_update, it should send the opcode
GAP_CONN_PARAM_UPDATE, instead, it send GAP_PASSKEY_ENTRY.
Signed-off-by: Jun Huang <huangjun6@xiaomi.com>
bt_le_oob_set_legacy_tk is not defined with this
setting and this code is reachable only for legacy pairing
signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
With this change, L2CAP/LE/CFC/BV-06-C can be supported when using
BT_RPMSG and the others HCI transports.
Depending on CONFIG_BT_HCI_RESERVE, the HCI transport requires extra
headroom in a BT buffer.
Signed-off-by: Ryan Chu <ryan.chu@nordicsemi.no>
The LOG_MINIMAL option is no longer user-configurable, as now it has
no prompt. LOG_MODE_MINIMAL should be modified instead.
But in this case, the assignment is redundant, as this option is not
enabled by default. Remove it then, to align the configuration file
for nrf5340dk_nrf5340_cpuapp with the one for nrf52840dk_nrf52840.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Use these callbacks to send BTP events. They are useful for test
automation in auto-pts.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
The mesh settings.c module is a giant piece of code responsible for
storing the mesh stack configuration. Such approach makes it difficult
to control the data to be stored, breaks the stack modules'
encapsulation by forcing them to reveal the internal kitchen, which
leads to unpleasant issues such as #19799.
This commit moves the responsibility of storing the configuration
to corresponding modules while keeping control of the moment of storing
the configuration and of starting the stack after the settingss loading
is completed.
This doesn't introduce any abstraction between the mesh settings.c and
other modules as it will add more complexity and overhead than necessary
for the actual task.
Fixes#19850
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
After change 7e302979f3 some
MESH/NODE/NET/ tests would fail because we tried to send a message to a
non-unicast address using the device key. This patch fixes that by
defining and adding an app key for vendor model which is then used to
send network packets for these test cases.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
In the function conn_param_update, it should send the opcode
GAP_CONN_PARAM_UPDATE, instead, it send GAP_PASSKEY_ENTRY.
Signed-off-by: Jun Huang <huangjun6@xiaomi.com>
Adds a `destroy` callback to the `struct bt_gatt_indicate_params` which
is used to signify to the application that the indication operation has
completed and the struct instance can be freed/destroyed.
This is required as the number of indication value callbacks that will
be triggered is not known by the caller when the `conn` parameter is
`NULL`.
Tracking when this callback should be run is mananged by a private
reference counter inside the struct.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Update the signature of the `bt_gatt_indicate_func_t` callback type by
replacing the attr pointer with a pointer to the
`bt_gatt_indicate_params` struct that was used to start the indication.
This allows the callback to free the `bt_gatt_indicate_params` instance
if it was allocated from storage, while still allowing the
`bt_gatt_attr` value to be accessed through `params->attr`.
Allocating the `bt_gatt_indicate_params` instance from storage is
desirable as multiple indications can be queued, however each instance
must be valid until the callback is run.
Implements API update from #29357
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Moves mesh feature configuration to a separate module, deprecating the
bt_mesh_cfg_srv structure. The initial values for the features should
now be enabled through KConfig, where new config entries have been added
for each feature.
This removes the upward dependency on the config server from the core
stack, and makes the config server a pure frontend for the configuration
states, as all spec mandated behavior around the feature states is now
encapsulated.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Avoid sending duplicate GAP_EV_DEVICE_FOUND because adv_buf->len was
not cleared.
With this change, the following tests become more stable in a noisy
environment:
- GAP/BROB/OBSV/BV-01-C
- GAP/BROB/OBSV/BV-02-C
- GAP/BROB/OBSV/BV-05-C
- GAP/BROB/OBSV/BV-06-C
- GAP/DISC/RPA/BV-01-C
Co-authored-by: Konstantinos Sotiropoulos
konstantinos.sotiropoulos@nordicsemi.no
Signed-off-by: Ryan Chu <ryan.chu@nordicsemi.no>
Replace all calls to the assert macro that comes from libc by calls to
__ASSERT_NO_MSG(). This is usefull as the former might be different
depending on the libc used and the later can be customized to reduce
flash footprint.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
Fix the structures so that they are compliant with the stricter checks
of GCC 10.x, and at the same time correct a bug that was present in the
handling of the GAP Start Advertising BTP command.
Fixes#28375.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Make it actually give the original pointer to the attribute and its
resolved handle so static attributes don't need an extra lookup.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This patch adjusts L2CAP CoC related command and responses to the
recent BTP API changes.
BTP has been extended with Enhanced CoC support, thus few L2CAP
CoC related commands have been changed.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The board name for the nRF52 DK, so far known as nrf52_pca10040, is
renamed to nrf52dk_nrf52832. Its documentation and all references
to its name in the tree are updated accordingly. Overlay and
configuration files specific to this board are also renamed, to
match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Deprecate BT_LE_ADV defines in hci.h that are expected to be used by the
application in the scan received callback to identify the advertising
PDU type. These defines are mixing HCI input parameters and advertising
PDU types. Internally it is acceptable to mix these, but at the API we
should to mix in them.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Deprecate bt_create_conn_le and rename it to in order to add return
code, new arguments and to follow the established naming convention.
Add API for the application to control the scan parameters of the
initiator role. This allows the application more scheduling control
of the initiator in multi-role scenarios. Also provides options to
configure the initiator for LE Coded PHY for long range support.
We deprecate the old way of creating connection to make the name more
consistent with the rest of the API.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The service registration logic was using the wrong variable to check for
a pending service to be registered, which led to the same service being
registered twice in some cases. Fix the logic so that a pending service
is only registered once.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since we enable CONFIG_ASSERT in the tester app, the logging subsystem
will assert if it detects a missing log_strdup. Add the two missing ones
that I could find to properly log transient strings.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Implement the BTP command to set MITM, although on Zephyr this is not
configurable at runtime. Instead print a warning instructing to use the
CONFIG_BT_SMP_ENFORCE_MITM Kconfig option instead.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Implement the BTP GAP command and event for passkey confirmation.
This also allows us to set the passkey_confirm auth callback which
enables the keyboard/display IO capabilities.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since some tests require MITM to be off, disable the option that forces
the MITM flag at all times.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Disable stack measurements by default, since they pollute the log
output.
Ensure that the logging thread has enough stack.
Ensure that the UART that connects to the BTP client is
interrupt-driven.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a configuration file for the nRF52840 DK so that it uses RTT for
debugging and enables more protection measures.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
- Use the built-in mechanism for configuration overlays
(having a boards/ folder with <board>.conf fragments)
- Clean up variables that were giving warnings
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Assignments have no effect on promptless symbols. Flagged by
https://github.com/zephyrproject-rtos/zephyr/pull/20742.
BT_MESH_PROV is already selected by BT_MESH_PB_ADV and BT_MESH_PB_GATT,
which these configuration files enable.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Make the channel ops struct const since there really isn't anything
there that needs to change at runtime. The only exception is the L2CAP
shell which was playing with the recv callback, however that can be
fixed by introducing a simple bool variable.
With tests/bluetooth/shell this reduces RAM consumption by 112 bytes
while adding only 16 bytes to flash consumption.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Expose the bt_uuid_to_str function as an API to the application.
This aligns this function with the bt_addr_to_str function call. This
allows the application to use this function without having to enable
the BT_DEBUG option.
Move the in-place bt_uuid_str to internal logging, this is mainly done
due to the limitation in the log_strdup that shouldn't be exposed to the
application.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This define is not of use anymore since there's a global net_buf user
data Kconfig variable and its definition already guarantees a
sufficient minimum for Bluetooth.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
With the changes in PR #19836 applications now need to explicitly
include hci.h to use defines from it. Fix two sample/tests apps which
were missing this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds support to set different permissions to CCCD so security can
be checked when enabling notification which conforms to:
BLUETOOTH CORE SPECIFICATION Version 5.1 | Vol 3, Part G page 2360:
'3.3.3.3 Client Characteristic Configuration
Authentication and authorization may be required by the server to
write the configuration descriptor.'
In addition to that also ensure that notification are not re-enabled
until the proper security level is reached to conform to the following
statement:
'10.3.1.1 Handling of GATT indications and notifications
A client “requests” a server to send indications and notifications
by appropriately configuring the server via a Client Characteristic
Configuration Descriptor. Since the configuration is persistent
across a disconnection and reconnection, security requirements must
be checked against the configuration upon a reconnection before
sending indications or notifications. When a server reconnects to a
client to send an indication or notification for which security is
required, the server shall initiate or request encryption with the
client prior to sending an indication or notification. If the client
does not have an LTK indicating that the client has lost the bond,
enabling encryption will fail.'
Fixes#17983
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Rename bt_conn_security to bt_conn_set_security, this makes the API
naming more consistent.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Rename security level enum, using level and number instead of low,
medium, high and fips.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This removes the necessity of registering the storage for CCC and make
it part of the declaration itself.
Fixes#18547
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This will handle BTP Discover All Primary Services command.
Related TC: GATT/CL/GAD/BV-01-C
Fixes: #17861
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This changes RPA timeout so that the address is changed every 60
seconds. This change is needed to speed up privacy related test cases.
Currently, the new RPA was initiated on request that was a bit hackish
and could be done via BT_RPA_TIMEOUT Kconfig option.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This updates tester application to recent changes in BTP related
to Connection Parameters Update.
Connected event has been extended with connection parameters.
Connection Parameters Update command and event have beend added to
initiate and track current connection parameters.
Needed to automate qualification test GAP/CONN/CPUP/BV-06-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This enables support for GAP writable device name in tester application
for testing purposes.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move atomic.h to sys/atomic.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The first word is used as a pointer, meaning it is 64 bits on 64-bit
systems. To reserve it, it has to be either a pointer, a long, or an
intptr_t. Not an int nor an u32_t.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The DT spec. only has "okay" and not "ok". The Linux kernel has around
12k "okay"s and 300 "ok"s.
The scripts/dts scripts only check for "disabled", so should be safe re.
those at least.
The replacement was done with
git ls-files | xargs sed -i 's/status\s*=\s*"ok"/status = "okay"/'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This tries to build gpio without any driver which fails at cmake time
like this:
CMake Error at ../../../cmake/extensions.cmake:378 (add_library):
No SOURCES given to target: drivers__gpio
Call Stack (most recent call first):
../../../cmake/extensions.cmake:355 (zephyr_library_named)
../../../drivers/gpio/CMakeLists.txt:3 (zephyr_library)
Remove TEST_USERSPACE workaround added in commit 3b53e69249 which
added gpio_handlers.c to the SOURCES.
Fixes#15232.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For mysterious reasons this test fails cmake if
CONFIG_TEST_USERSPACE=n.
Enable it for now, bug tracked in #15232
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This moves BTP specification from Zephyr so that it's accessible for
all projects.
Related auto-pts PR: https://github.com/intel/auto-pts/pull/244
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This patch adds overlay for nrf52_pca10040 and reel board to use
btp tester. These are based on nrf52840.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
This adds a int return to recv callback which can be used to notify the
stack about errors when receiving a packet. In addition to that the user
can return -EINPROGRESS to inform the stack the data will be processed
asynchronously which can be complete by calling
bt_l2cap_chan_recv_complete.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
PTS test cases MESH/NODE/TNPT/BV-07-C, MESH/NODE/TNPT/BV-12-C, requires
to receive 8 segment of data which summary requires 108 bytes of SDU.
This patch make test cases PASSing.
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@codecoup.pl>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Make it possible to have multiple identity addresses as an LE
peripheral. For central role only the default identity is supported
for now. This also extends the flash storage in a backward compatible
way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
UART_PIPE_ON_DEV_NAME is set to UART_1 by default in
boards/arm/qemu_cortex_m3/qemu_cortex_m3.dts
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes an issue of system workqueue stack overflow that was
was observed during Bluetooth Mesh automated testing.
Increase system workqueue stack to avoid MPU faults.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Fixes#8262
Remove non-existent Kconfig symbol references. An additional (but
related) change is the removal of all persistent storage symbols from
the Arduino 101 Bluetooth shell app, since BT_STORAGE no longer
exists.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This ensures the every characteristic has a value attribute declared
with the same UUID since the old macro did not declare the value the
application would normally have to declare one itself using a different
UUID which is not allowed.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The sequence number was acting as a stop-gap for missing persistent
storage. Now that we have the settings support in place it's no longer
needed.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Keeping the model struct same sized, change the element pointer to two
indexes, and add a flags member that will be used to track pending
storage actions.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The same functionality is now supported by the settings-based
solution, so remove bt_storage out of the way. There were stubs in
bt_storage to handle per-peer information (e.g. pairing keys) but this
was never actually implemented in full. The next step is to add this
support to the settings-based solution.
Leave the code for generating temporary IRK and identity address in
case BT_SETTINGS is not enabled. Also leave the code for using vendor
HCI to read the identity address, in which case the settings
implementation will not touch it.
Introduce a new bt_unpair() API to replace the removed
bt_storage_clear(), since the latter was actually doing more than just
storage management: it was also handling runtime storage of pairing
information. Later, the bt_unpair() implementation will be extended to
clear settings-based pairing storage.
There is one feature that the bt shell module looses: the ability to
give a specific identity address to the "init" command as a parameter.
We might look later in the future if this is really needed, and add a
separate API for this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds Enable advertising with Node Identity BTP command and
it's implementation.
This command is needed to pass PTS MESH/NODE/CFG/NID/BV-02-C
test case.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This command has been agreed and implemented in tester application.
The patch updates BTP document only.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Convert the mesh code to use the new net_buf_siple APIs. This has the
benefit of saving 4 bytes off the stack due to the not needed pointer.
Also update the publication context helpers to map to the new
net_buf_simple API in an intuitive way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Application should normally declare a bt_uuid with proper type and then
use bt_uuid_cmp.
Fixes#5162
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
PTS requires the composition data of size that cannot be sent in
single PDU. This patch adds Configuration and Health Client models
to the root_models to increase the Elements size in Composition Data
Page 0.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This disables CONFIG_BT_MESH_LPN_AUTO flag in Kconfig.
LPN is enabled by calling BTP Low Power Node command
if requested.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds commands to manage Friend node Subscription List.
Those will be used to add or remove and group/virtual address
from subscription list.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This command will be used to test if model can properly send
segmented and unsegmented messages to a given destination address.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Of these, only struct net_ipv6_nbr_data::send_ns is a descriptive
change:
send_ns is used for timing Neighbor Solicitations in general, not
just for DAD.
The rest are typo/grammar fixes.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This adds stubs for Core Unregister Service command implementation.
It will be used to clean up the stack and tester after test case
execution.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This chack shall be performed on attribute uuid type, not uuid provided
in Gatt Get Attributes command paramteres.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Those commands will be used for qualification purposes to verify
the functionality of Mesh Health Model.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This event is needed for qualification purposes to verify functionality
of Mesh Network layer.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This introduced two BTP events to indicate provisioning link state.
This is needed for testing purposes, since PTS requests tester to
confirm link state.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This procedure is used query local GATT Server for attributes
based on given search pattern. Attributes can be searched using
Attribute Handle range and Attribute Type.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This will be used for verification in GATT test cases.
This procedure is used query local GATT Server for attributes
based on given search pattern. Attributes can be searched using
Attribute Handle range and Attribute Type.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Remove references to make-centric build process, and refer to the
steps in a more neutral way (which is equally applicable to using
either make or ninja as the generator type).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Attribute Value Changed Event will be used to indicate characteristic
or descriptor value change in local GATT Server database.
Event will be triggered when PTS performed ATT Write operation
successfully.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
GATT Server:
According to the API, include service declaration user data
points to the first service attribute to include.
bt_gatt_include structure is valid only for client role.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
/tmp/bt-stack-tester is not a pipe, but unix domain socket.
This commit fixes respective "make run" errors:
qemu-system-arm: -serial pipe:/tmp/bt-stack-tester: Could
not open '/tmp/bt-stack-tester': No such device or address
qemu-system-arm: -serial pipe:/tmp/bt-stack-tester: could
not connect serial device to character backend
'pipe:/tmp/bt-stack-tester
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
We use UART1 for UART pipe in a number of qemu tests, so lets do the
same thing for the bluetooth test and move the bluetooth uart to UART2.
Jira: ZEP-2412.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The documentation of k_fifo_put mentions that the items must have 32
bits reserved for kernel use as that is where the sys_snode_t pointer
is placed but this detail was not taken into consideration when
designing the cmd_queue which access each element as a btp_cmd.
Note: This probably used to work just because k_fifo_get used to place
data directly into thread's swap_data so the kernel never really touched
the list but with the changes to use k_poll the list is always updated
exposing this issue.
Jira: ZEP-2568
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some README files referenced wiki articles that have been
moved to the doc area on the website.
Fixes#668
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The worst-case maximum number of CCC entries we need is actually
MAX_CONN + MAX_PAIRED. Provide a helper define for it and use it
whenever appropriate.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The new GATT service registration API is bt_gatt_service_register(),
which takes a bt_gatt_service object pointer.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This will prepare test cases and samples with metadata and information
that will be consumed by the sanitycheck script which will be changed to
parse YAML files instead of ini.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds bt_gatt_register_service using bt_gatt_service which contains
the attribute array that is then added to the database saving a pointer
in each and every attribute declared.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Removes CONFIG_BLUETOOTH_GATT_DYNAMIC_DB in preparation to the
introduction of bt_gatt_unregister.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I6c676bc6c5e850a8725785554cd535e32067f33e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This fixes an issue introduced by bab3aafa2d,
which changed the default value of UART_PIPE_ON_DEV_NAME to the same
used by BLUETOOTH_UART_ON_DEV_NAME. Due to this, the BTP and HCI were using
the same UART.
Change-Id: Ib59819e49610f28f4c89c0304d024bb1b6aa506a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This will replace the current goal of 'make qemu' with 'make run' and
moves Qemu handling into its own file and into the boards instead of
being architecture specific.
We should be able to add new boards that support some other type of
emulation (by adding scripts/Makefile.<emu type>) and allow the board to
define their own options for the use type of emulation.
'make qemu' will still work, however it will be deprecated, starting
with this commit it is recommended to use 'make run'.
Jira: ZEP-359
Change-Id: I1cacd56b4ec09421a58cf5d010e22e9035214df6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This helps simplify code that was previously combining net_buf_add()
with memcpy().
Change-Id: If44cf9cd651aba5e544e36567869f147468663eb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To customise test builds and support test related features such as time
stamps and a boot banner, introduce a Makefile variant that is dedicated
to testing.
Initially we introduce a new config overlay that is used for all tests, in
this case we enable BOOT_BANNER and BUILD_TIMESTAMP. This will print the
current version and the date, useful when reporting bugs and also an
indicator that the system has booted before the test has started.
For example:
[QEMU] CPU: qemu32
***** BOOTING ZEPHYR OS v1.6.99 - BUILD: Dec 21 2016 19:57:13 *****
tc_start() - Test Nanokernel CPU and thread routines
Initializing nanokernel objects
...
..
Change-Id: I224318cdeb55a301964ea366dbc577e2e3a09175
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move logging out of misc/ to its own subsystem. Anything related to
logging and any new logging features or backends could be added here
instead of the generic location in misc/ which is overcrowded with
options that are not related to eachother.
Jira: ZEP-1467
Change-Id: If6a3ea625c3a3562a7a61a0ba5fd7e6ca75518ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There are static initializer macros available for most kernel objects
which we should use whenever possible.
Change-Id: I496f4d05d26801eddd21fae53bdd4fcdc3246fe3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In order to keep the initialization process light-weight, remove
net_buf_pool_init() and instead perform the initialization of the pool
and buffers in a "lazy" manner. This means storing more information
in the pool, and removing any 'const' members from net_buf. Since
there are no more const members in net_buf the buffer array can be
declared with __noinit, which further reduces initialization overhead.
Change-Id: Ia126af101c2727c130651b697dcba99d159a1c76
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Until now it has been necessary to separately define a k_fifo and
an array of buffers when creating net_buf pools. This has been a bit
of an inconvenience as well as blurred the line of what exactly
constitutes the "pool".
This patch removes the NET_BUF_POOL() macro and replaces it with a
NET_BUF_POOL_DEFINE() macro that internally expands into the buffer
array and new net_buf_pool struct with a given name:
NET_BUF_POOL_DEFINE(pool_name, ...);
Having a dedicated context struct for the pool has the added benefit
that we can start moving there net_buf members that have the same
value for all buffers from the same pool. The first such member that
gets moved is the destroy callback, thus shrinking net_buf by four
bytes. Another potential candidate is the user_data_size, however
right not that's left out since it would just leave 2 bytes of padding
in net_buf (i.e. not influence its size). Another common value is
buf->size, however that one is also used by net_buf_simple and can
therefore not be moved.
This patch also splits getting buffers from a FIFO and allocating a
new buffer from a pool into two separate APIs: net_buf_get and
net_buf_alloc, thus simplifying the APIs and their usage. There is no
separate 'reserve_head' parameter anymore when allocating, rather the
user is expected to call net_buf_reserve() afterwards if something
else than 0 headroom is desired.
Change-Id: Id91b1e5c2be2deb1274dde47f5edebfe29af383a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Those tests are now build with unified kernel.
Change-Id: Idbc42bb77060cea0130d62cccdf2e40aeee89128
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Switch left-over usage of TICKS_NONE and TICKS_UNLIMITED to the new
unified kernel counterparts K_NO_WAIT and K_FOREVER.
Change-Id: I2f2a16360e816f9f8791eb216deb3c70b8cc87df
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert fiber_start to k_thread_spawn and nano_fiber_fifo_put to
k_fifo_put.
Change-Id: If1ec405ec602e28a538f4c9569ede87519346559
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use defines from k_fifo intead of legacy API.
Change-Id: Ib8cf0d88240ef145da550b8cf83d2580e7140521
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Restructure the Bluetooth options more logically.
- Both host and controller are now behind the same high level
CONFIG_BLUETOOTH.
- Selecting controller support disables other HCI driver selection, so
the controller isn't in the same list as HCI drivers any more.
- Under the top-level there's a "Custom stack" option, which when
enabled opens up the option of choosing CONFIG_NBLE.
There are various other cleanups and simplifications in this patch as
well, since splitting these up would have been fairly tricky while
making sure all test cases still build.
Change-Id: I5bb715cb9d20201cb8b72fbd149c8a09a4b2d7d2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This increases number of available L2CAP channels for the test purposes.
This is needed for TC_COS_CFC_BV_05_C test case.
Change-Id: I5df099fb64632e1a0e557852ca55ee45a9cc89ed
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This fixes configuration file name in testcase.ini file.
Change-Id: I6496f98694415bfc3a76308aa9ee6dfd008e1691
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This updates README as well as makefile to choose Zephyr BLE firmware
configuration as a default one.
Closes: ZEP-1187
Change-Id: I78dec2a4e2b5bfe634a8b7b8897d4f6ab6b37b44
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds sample configuration file for tester application that
supports controllers with Zephyr-based BLE firmware.
Change-Id: I8b63f93d1395837b8485aba7060b6626be1daab1
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
