For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's fix the error messages:
* native_posix is in general replaced with native_sim
* let's use hwmv2 names
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Replace uses of native_[posix,sim]_64 in the documentation
and kconfig help messages with native_[posix,sim]/native/64
to match the hwmv2 naming.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This sample enables EVENTFD (through NET_SOCKETS_SERVICE)
which is not kconfig compatible with the old
NATIVE_APPLICATION targets (native_posix[//64])
Let's explicity filter out this platforms to avoid the
sample from failing to build
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Remove the hwmv1 twister board definitions for
native_posix_64 / native_sim_64 in preparation to
transition to the new definitions for hwmv2
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
When updating the bsim install in the docker image's
/opt/bsim_west to the version pointed in the Zephyr
manifest, we are detaching the head to that version.
We suppress the "You are in 'detached HEAD' state..."
git warning as it is just noise in CI.
So far we were doing it by globally supressing that
warning. Let's instead just supress it for the
command in question so we don't change global
git config against expectations.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The west manifest may point to a newer version of bsim than
the one avaliable in the docker image. Let's ensure
we run with that one.
This is equivalent to the change done in
933d338c97
for the bsim-tests workflow.
Note that the update and rebuild is incremental,
so if the docker image already has the right
version the operation is very fast
(~1 second)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Debug logs in helper functions like tcp_unsent_len() or
tcp_window_full() are not very helpful and generate a heavy, unnecessary
log output. Therefore, tcp_unsent_len() will no longer generate log, and
tcp_window_full() will print out a log only when the window is actually
full, which could be an useful information.
Also, reduce the log load during TX, as currently redundant logs were
printed in tcp_out_ext(), tcp_send_process_no_lock() and finally in
tcp_send().
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This board's twister yaml file claims to support the
arduino-serial tests, but it does not provide
the necessary DTS node, which is causing
failures in CI.
Let's remove the tag from the twister board definition.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Use SPI_LOCK_ON to lock configuration for multiple transaction while CS is
kept low.
Change control of CS line from direct GPIO manipulation to SPI driver API.
Signed-off-by: Michele Sardo <msmttchr@gmail.com>
Keep the SPI enabled when performing multiple transaction with
SPI_HOLD_ON_CS.
In such case, the end of transaction is marked by application calling
spi_release.
Signed-off-by: Michele Sardo <msmttchr@gmail.com>
Use the nrf_reset_network_force_off() function to release and set the
force-off signal.This ensures that the workaround for errata 161 is
applied.
Signed-off-by: Vidar Berg <vidar.berg@nordicsemi.no>
If send the igmp packet when lower interface is down, the packet will be
freed twice and show error log. Remove the net_pkt_unref in igmp_send(),
and let the caller free it.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Some compilers (especially C++ compilers) will complain with
invalid conversion (-fpermissive) if the void pointers are not
explicitly typecast. This PR adds said typecast.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Zperf upload multicast always use default interface.
Zperf download multicast cannot receive packets from other than
224.0.0.1 which is default multicast group.
Add zperf upload/download option -I <interface name> for multicast.
So that user can select interface for multicast.
Add join multicast group for zperf download.
Use the "device list" command to get the interface name as
follows:
"- ua (READY)" #uAP interface name
"- ml (READY)" #STA interface name
Multicast traffic commands:
zperf udp upload -a -I ua 224.0.0.2 5001 10 1470 1M
zperf udp download -I ua 5001 224.0.0.3
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
The expression (options & WDT_OPT_PAUSE_IN_SLEEP) is duplicated. Fix it
by replacing the second one with (options &WDT_OPT_PAUSE_HALTED_BY_DBG).
Signed-off-by: YunZe Li <yzli.cs@realtek.com>
Fix compilation warning due to taking member from a packed structure
and assigning it to a pointer. Compiler warns that it may be
unaligned. However, it is ensured that it will be aligned by
operations preceding this assignment.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
A lot of the log messages are using highest level, optimize
them to recycle as much messages as possible.
When building the sample with `CONFIG_HAWKBIT_LOG_LEVEL_DBG`
on `frdm_k64f`, the FLASH size is reduced from 150860 B to
150048 B, saving ~800 bytes.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Brings the following fix:
gecko/cmake: replace 'SOC_GECKO_SERIESx' with 'SOC_FAMILY_SILABS_Sx'
Fixes: #69902
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This PR fixes the following compiler warning:
No SOURCES given to Zephyr library: lib__posix__shell
Signed-off-by: Matthias Alleman <matthias.alleman@basalte.be>
https://github.com/zephyrproject-rtos/zephyr/pull/67595
introduces a bug where if QEMU_BIN_PATH is not set on a Windows
PC, on-device tests are skipped. This fixes that issue.
Signed-off-by: Glenn Andrews <glenn.andrews.42@gmail.com>
The core clock of 8ULP's HIFI4 DSP runs at 475.2MHz. As such,
correct the value of `CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC` to
reflect this.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Fix CIS accepted by Host being failed in the Controller with
reason 0x20 Unsupported LL Parameter Value, by relaxing the
check that the ACL connection is sufficiently placed such
that the time reservation using in the Controller
implementation does not overlap with the CIG event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
