Update LPSS DMA init interface which is common and
independent of parent-node.
Signed-off-by: Anisetti Avinash Krishna <anisetti.avinash.krishna@intel.com>
We should set the z_clock_hw_cycles_per_sec as the value of
the system clock frequency.
There was a mistake in referencing the clock source set before
initialization.
I corrected it to reflect the clock value after initialization.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
I/O or memory decoding should be disabled via the command register
before sizing BAR for calculation MMIO size
Signed-off-by: Najumon B.A <najumon.ba@intel.com>
Only copy up to IFNAMSIZ - 1 number of characters of the interface name to
leave room for null termination of string.
Fixes: #66777
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
When reconfiguring a previously used endpoint, it may still be locked
when a write was taking place when e.g. the host application crashed.
The call to udc_rpi_cancel_endpoint seems to do a proper cleanup of
the endpoint, i.e. the write semaphore will be released.
Fixes#66723.
Signed-off-by: Manuel Aebischer <manuel.aebischer@netmodule.com>
The length of the updated metadata was not updated.
Fixes the CAP/INI/BST/BV-13-C test case.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
This change follow the recent commit that update openamp rsc table logs.
Add the logs for both samples sample client & TTY responder,
as well as for both sides Linux & Zephyr.
Remove the serial connection to Zephyr because it is board specific.
Signed-off-by: Marc-Antoine Riou <marc-antoine.riou@iot.bzh>
Add logs in both of the openamp rsc table loops to stick with
what is shown in Zephyr documentation. Prefix each message with the loop
name and unify logs with those from rpmsg_client_sample module.
Signed-off-by: Marc-Antoine Riou <marc-antoine.riou@iot.bzh>
Sample openamp_rsc_table was sending too many characters to master.
It was displayed as unrecognised character when reading message on master.
Signed-off-by: Marc-Antoine Riou <marc-antoine.riou@iot.bzh>
This commit updates the Ambiq Apollo4x series soc clock frequency
of defined instances to align with context of these dts files.
Signed-off-by: Aaron Ye <aye@ambiq.com>
This commit updates the support features in document and yaml files
of Ambiq apollo4p_evb and apollo4p_blue_kxr_evb.
Signed-off-by: Aaron Ye <aye@ambiq.com>
Documentation pages around Kconfig have moved around on a couple of
occasions in the past [1] [2] and current redirects were dysfonctional
(leading /) and incomplete, while an entire set of redirects was also
missing. This notably fixes the "browse latest development version of
this page" link on
https://docs.zephyrproject.org/2.7.5/guides/build/kconfig/tips.html or a
link to the "Kconfig tips" page as found in Kconfiglib's current README
(https://pypi.org/project/kconfiglib/)
[1] commit 5342bc64dd [2] commit
5c88418428Fixes#66701
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Always use k_thread_foreach_unlocked with callbacks which print
something out to the shell, as they might call arch_irq_unlock.
Fixes#66660.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
As per the changelog of the Contributor Covenant between versions 1.4
and 2.1, the main changes are:
2.0
- Emphasizes 'community' over 'project' scope, effectively merging the
Community Covenant into the Contributor Covenant
- Adds expectation about accepting responsibility and apologizing to
those affected by mistakes, and learning from the experience to the
list
- Adds sexual attention and advances of any kind as unacceptable
behavior example
- Moves enforcement responsibilities from project maintainers to
community leaders
- Adds responsibility to communicate reasons for moderation decisions
when removing, editing, or rejecting contributions not aligned to the
Code of Conduct
- Requires community leaders to respect privacy and security of the
reporter of any incident, not just confidentiality
- Provides a template for code of conduct enforcement
2.1
- Adds 'caste' and 'color' to the preamble
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
When Bluetooth is enabled, it is required to arbitrate flash accesses
between RF and write accesses (for user activity).
A dedicated flash manager is provided as part of STM32WBA BLE lib.
Implement a dedicated driver using FM Apis to handle RF activity.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Flash coexistence facility is provided by a dedicated BLE controller
driver added in hal_stm32 WBA lib.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
STM32WBA controller uses a PKA driver to perform cyphering operations
on keys. Since PKA hardware block requires RNG clock to be enabled, a
synchronization with zephyr RNG driver is needed.
Use RNG enable status to check if RNG could be switched off or needs to
be switched on.
Similarly in entropy driver, don't cut RNG clock if PKA is enabled.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Increase stack size for tests and exclude nono libc scenarios causing
some issues with coverage collection.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
tag nano libc tests with nano so we can exclude them if needed. Now they
cause issues when collecting coverage information from tests.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use gcovr to generate reports and upload cobertura style file instead of
previously lcov info file.
We have been seeing issues with lcov format and code being reporting as
not covered although by inspecting the generate output files, they
should be.
The XML format we generate is otherwise easier to parse and deal with.
Also reduce frequency to twice a day.
Fixes#66656
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Any received address is no longer valid once the interface goes down.
Leaving the address assigned results in the L4 interface transitioning
through the following on reconnection:
UP: Interface is connected
DOWN: Old address is removed by DHCP
UP: New address is re-added by DHCP
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Networking events are masks of bits, which are almost impossible to read
as decimal, and trivial to read as hex. Also unifies the format string
across multiple outputs for some flash savings.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
If we receive a packet where the source address is our own
address, then we should drop it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If we receive a packet from non localhost interface, then
drop it if either source or destination address is a localhost
address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
A bad peer responding to read-by-uuid can return handles outside the
requested range. This confuses the stack. In particular, the "continue"
and "end" logic in the same function relies on this assumption.
This bad peer was a real issue at UPF, and it caused an infinite loop
during discovery.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/50686
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
The driver works on active low signals only, change the interrupt
configuration to trigger on falling edges only.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
It is possible that address + size will overflow the available
address space and the pointer wraps around back to zero. Some
of these have been fixed in previous commits. This fixes
the remaining ones with regard to Z_PHYS_RAM_START/_END,
and Z_VIRT_RAM_START/_END.
Fixes#65542
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When scanning ports the manufacture field is not always
filled. It must be checked before using.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
The sample did not correctly select the WinUSB
driver for the WebUSB interface as required
on Windows when CDC ACM was included in the
build configuration (the case for e.g. nRF52840
Dongle).
Introduce correct function subset header in the
MS OS 2.0 descriptor.
Signed-off-by: Lars Knudsen <larsgk@gmail.com>
Implement pthread_getguardsize() and pthread_setguardsize().
pthread_getguardsize() and pthread_setguardsize() are required
by the POSIX_THREADS_EXT Option Group as detailed in Section
E.1 of IEEE-1003.1-2017. However, they were formerly part of
XSI_THREADS_EXT.
The XSI_THREADS_EXT Option Group was required for PSE51, PSE52,
PSE53, and PSE54 conformance.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
This change reduces the space occupied by struct pthread_attr
which is the internal type used for pthread_attr_t.
We cap the stack size at 16 bits (so up to 65536 bytes) and
since a stack size of 0 is invalid, we can encode the stack
size by simply subtracting 1 or adding 1 when setting or
getting.
The schedpolicy is capped at 2 bits and initialized,
cancellable, and detached are given 1 bit.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
* Use PTHREAD_STACK_MIN as provided by the specification
instead of a hard-coded value of 1024
* add extra stack size to semaphore tests
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
ESP32 family pinctrl files are currently placed in hal_espressif.
Move to main branch as part of pinctrl dt-bindings.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
