This is really useful only for one case i.e. when testing against zero.
Do that test inline where it is needed and make the rest of the code
independent from the actual numerical value being tested to make code
maintenance easier if/when new cases are added.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
MISRA C:2012 Rule 21.13 (Any value passed to a function in <ctype.h>
shall be representable as an unsigned char or be the value EOF).
Functions in <ctype.h> have undefined behavior if they are called with
any other value. Callers affected by this change are not prepared to
handle EOF anyway. The addition of these casts avoids the issue
and does not result in any performance penalty.
Signed-off-by: Abramo Bagnara <abramo.bagnara@bugseng.com>
Signed-off-by: Simon Hein <SHein@baumer.com>
Allow the application to enable the FPU when TF-M has been enabled.
Pass the correct compilation flags according to the TF-M integration
guide.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Enable single-threaded support for the arm64 archtecture.
This mode of execution is supported on an soc under
development and is validated regularly.
Signed-off-by: Eugene Cohen <quic_egmc@quicinc.com>
In performing a double check of Zephyr arm64 MMU config
against edk2, a different in the programming of the
Translation Control Register (TCR) was found. TCR.TG[1]
should be set to address Cortex-A57 erratum 822227:
"Using unsupported 16K translation granules might cause
Cortex-A57 to incorrectly trigger a domain fault"
Signed-off-by: Eugene Cohen <quic_egmc@quicinc.com>
By default ARCH_IRQ_VECTOR_TABLE_ALIGN and ARCH_SW_ISR_TABLE_ALIGN are
set to 0. Use a more proper value.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The generation of the software ISR table and the IRQ vector table
(respectively generated by CONFIG_GEN_SW_ISR_TABLE and
CONFIG_GEN_IRQ_VECTOR_TABLE) should (in theory) go through three stages:
1. A placeholder table is generated in arch/common/isr_tables.c and
placed in an orphaned .gnu.linkonce.{irq_vector_table, sw_isr_table}
section
2. The real table is generated by arch/common/gen_isr_tables.py (creating
the build/zephyr/isr_tables.c file)
3. The real table is un-orphaned by moving it in a proper section with a
proper alignment
While all the steps are done automatically for the software ISR table,
for the IRQ vector table each architectures must take care of modiying
its own linker script to place somewhere the generated IRQ vector table
(basically step 3 is missing).
This is currently only done for 2 architectures: Cortex-M (ARMv7) and
ARC. But when another architecture tries to use the IRQ vector table,
the linker complains about that. For example:
Linking C executable zephyr/zephyr.elf
riscv64-zephyr-elf/bin/ld.bfd: warning: orphan section
`.gnu.linkonce.irq_vector_table' from
`zephyr/CMakeFiles/zephyr_final.dir/isr_tables.c.obj' being placed in
section `.gnu.linkonce.irq_vector_table'
In this patch we introduce a new CONFIG_ARCH_IRQ_VECTOR_TABLE_ALIGN to
support the architectures requiring a special alignment for the IRQ
vector table and we also introduce a way to automatically place the IRQ
vector table in place in the same way it is done for the ISR software
table.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
On platforms where reset vector catch is not possible
it is useful to have a compile-time option to spin
at the reset vector allowing a debugger to be attached
and then to manually resume execution.
Define a config option for arm64 to spin at the
reset vectdor so a debugger can be attached.
Signed-off-by: Eugene Cohen <quic_egmc@quicinc.com>
Under no circumstances the generated IRQ vector table can and should
contain NULL values. This is correctly enforced at generation time by
the gen_isr_tables.py script making the existence of the ISR_WRAPPER
define useless.
The enforced behaviour is:
- When the ISR software table exists defaults to _isr_wrapper
- Otherwise defaults to z_irq_spurious
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Retrieve the pmpaddr value matching the last global PMP slot and add it
to the per-thread m-mode and u-mode entry array. Even if that value is
not written out again on thread context switch, that value can still be
used by set_pmp_entry() to attempt a single-slot TOR mapping with it.
Nicely abstract this with the new z_riscv_pmp_thread_init() where the
PMP_M_MODE(thread) and PMP_U_MODE(thread) argument generators can be
used.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Adds compatibility with Intel ADSP GDB from Zephyr SDK and
from Cadence toolchain to coredump_gdbserver.py.
Adds CAVS 15-25 (APL) register definitions. Implements
handle_register_single_read_packet to serve ADSP GDB
p packets.
Prevents BSA from changing between stack dump printout
and coredump by taking lock. Observed to be necessary for
accurate results on slower simulated platforms.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Triggers CPU exception with illegal instruction when z_except_reason
is called (e.g. in k_panic, k_oops). Creates exception stack frame
for use by coredump. Adds unique cause code for ARCH_EXCEPT. Disables
test case failure for qemu_xtensa.
Without an ARCH_EXCEPT implementation, z_except_reason calls
z_fatal_error directly with a null ESF and bypasses
xtensa_excint1_c's error logging. An ESF is required to coredump.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
A QEMU bug may create bad transient PMP representations causing
false access faults to be reported. Work around it by setting
pmp registers to zero from the update start point to the end
before updating them with new values.
The QEMU fix is here with more details about this bug:
https://lists.gnu.org/archive/html/qemu-devel/2022-06/msg02800.html
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This reverts the bulk of commit c8bfc2afda ("riscv: make
arch_is_user_context() SMP compatible") and replaces it with a flag
stored in the thread local storage (TLS) area, therefore making TLS
mandatory for userspace support on RISC-V.
This has many advantages:
- The tp (x4) register is already dedicated by the standard for this
purpose, making TLS support almost free.
- This is very efficient, requiring only a single instruction to clear
and 2 instructions to set.
- This makes the SMP case much more efficient. No need for funky
exception code any longer.
- SMP and non-SMP now use the same implementation making maintenance
easier.
- The is_user_mode variable no longer requires a dedicated PMP mapping
and therefore freeing one PMP slot for other purposes.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
5f65dbcc9dab3d39473b05397e05.
The tp (x4) register is neither caller nor callee saved according to
the RISC-V standard calling convention. It only has to be set on thread
context switching and is otherwise read-only.
To protect the kernel against a possible rogue user thread, the tp is
also re-set on exception entry from u-mode.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
MISRA C:2012 Rule 8.2 (Function types shall be in prototype form with
named parameters.)
Added missing parameter names.
Signed-off-by: Abramo Bagnara <abramo.bagnara@bugseng.com>
For some reasons RISCV is the only arch where the vector table entry is
called __irq_wrapper instead of _isr_wrapper. This is not only a
cosmetic change but Zephyr expects the common ISR handler to be called
_isr_wrapper (for example when generating the IRQ vector table).
Change it.
find ./ -type f -exec sed -i 's/__irq_wrapper/_isr_wrapper/g' {} \;
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This commit updates all deprecated `K_KERNEL_STACK_ARRAY_EXTERN` macro
usages to use the `K_KERNEL_STACK_ARRAY_DECLARE` macro instead.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit corrects all `extern K_THREAD_STACK_DEFINE` macro usages
to use the `K_THREAD_STACK_DECLARE` macro instead.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit corrects all `extern K_KERNEL_STACK_ARRAY_DEFINE` macro
usages to use the `K_KERNEL_STACK_ARRAY_DECLARE` macro instead.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit selectively disables the infinite recursion warning
(`-Winfinite-recursion`), which may be reported by GCC 12 and above,
for the `disable_table` function because no actual infinite recursion
will occur under normal circumstances.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
arch_mem_map() on ARM64 is currently not supporting the K_MEM_PERM_USER
parameter so we cannot allocate userspace accessible memory using the
memory helpers. Fix this.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Expose the Xtenesa CCOUNT timing register (the lowest level CPU cycle
counter) using the arch_timing_*() API.
This is the simplest possible way to get this working. Future work
might focus on moving the rate configuration into devicetree in a
standard way, integrating with the platform clock driver on intel_adsp
such that the reported cycle rate tracks runtime changes (though IIRC
this is not a SOF requirement), and adding better test coverage to the
timing layer, which right now isn't exercised anywhere but in
benchmarks.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
<soc.h> has been traditionally been used as a proxy to HAL headers,
register definitions, etc. Nowadays, <soc.h> is anarchy. It serves a
different purpose depending on the SoC. In some cases it includes HALs,
in some others it works as a header sink/proxy (for no good reason), as
a register definition when there's no HAL... To make things worse, it is
being included in code that is, in theory, non-SoC specific.
This patch is part of a series intended to improve the situation by
removing <soc.h> usage when not needed, and by eventually removing it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
<soc.h> has been traditionally been used as a proxy to HAL headers,
register definitions, etc. Nowadays, <soc.h> is anarchy. It serves a
different purpose depending on the SoC. In some cases it includes HALs,
in some others it works as a header sink/proxy (for no good reason), as
a register definition when there's no HAL... To make things worse, it is
being included in code that is, in theory, non-SoC specific.
This patch is part of a series intended to improve the situation by
removing <soc.h> usage when not needed, and by eventually removing it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The NS16550 UART base address was hardcoded in <soc.h> headers. This
bypasses the console choice defined in Devicetree. Hardcoded hardware
choices must be avoided now that DT is in place.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In preparation for the support of RV32E optimize a bit the t* registers
usage limiting that to t{0-2}.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This patch is doing several things:
- Core ISA and extension Kconfig symbols have now a formalized name
(CONFIG_RISCV_ISA_* and CONFIG_RISCV_ISA_EXT_*)
- a new Kconfig.isa file was introduced with the full set of extensions
currently supported by the v2.2 spec
- a new Kconfig.core file was introduced to host all the RISCV cores
(currently only E31)
- ISA and extensions settings are moved to SoC configuration files
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Adds few missing zephyr/ prefixes to leftover #include statements that
either got added recently or were using double quote format.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
When returning from z_riscv_switch, depending on whether the thread that
has just been swapped in was earlier swapped out synchronously (i.e. via
regular function call) or asynchronously (i.e. via exception/irq) we
will return to arch_switch() or __irq_wrapper respectively. Comment this
fact for clarity.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
After the introduction of arch_switch() in #43085, ECALL is no longer
used for context switching by default, so remove the comment stating so.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The xtensa interrupt return path was forgetting to check the nested
interrupt state and calling into the scheduler to select the context
to which to return, which of course is completely wrong. We MUST
return to the ISR we interrupted.
In fact in practice this was only visible in the case of a nested
interrupt that causes a context switch, otherwise the "interrupted"
argument just gets returned and things work. In particular, it can
happen when the nested context is a fatal exception that aborts the
current thread, which is how this was discovered. The timing required
to see this on live interrupts on real applications is likely to have
been extremely difficult to detect.
Fixes#45779
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
ARCH_HAS_USERSPACE and ARCH_HAS_STACK_PROTECTION are direct functions
of RISCV_PMP regardless of the SoC.
PMP_STACK_GUARD is a function of HW_STACK_PROTECTION (from
ARCH_HAS_STACK_PROTECTION) and not the other way around.
This allows for tests/kernel/fatal/exception to test protection against
various stack overflows based on the PMP stack guard functionality.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
_current_cpu->irq_stack is not yet initialized when this is executed on
CPU 0. Also the guard area is outside of CONFIG_ISR_STACK_SIZE now
e.g. it is within the K_KERNEL_STACK_RESERVED area at the start of
the buffer. So simply use z_interrupt_stacks[] directly instead.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
A separate privileged stack is used when CONFIG_GEN_PRIV_STACKS=y. The
main stack guard area is no longer needed and can be made available to
the application upon transitioning to user mode. And that's actually
required if we want a naturally aligned power-of-two buffer to let the
PMP map a NAPOT entry on it which is the whole point of having this
CONFIG_PMP_POWER_OF_TWO_ALIGNMENT option in the first place.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The StackGuard area is used to save the esf and run the exception code
resulting from a StackGuard trap. Size it appropriately.
Remove redundancy, clarify documentation, etc.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
