Offloaded `fcntl` implementation should be available for all offloaded
implementations, not specific for TI. `socket_offload.c` is already
conditionally compiled based on `CONFIG_NET_SOCKETS_OFFLOAD` option, so
there should not be conflicts for non-offloaded interfaces.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Due to in-tree dependencies on Kconfig options defined in modules we end
up having warnings and errors when those modules are not part of the
manifest.
Users should be able to remove unwanted modules from their downstream
manifest and still build any board configurations.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds support for the async API for SAM0 SERCOM USARTs using
DMA to drive the device.
Tested on SAMD21 with a few trivial programs and with
tests/drivers/uart/uart_async_api.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
Implement the get_status DMA API for the SAM0 DMA controller.
The busy field is set only when the selected channel is
actively transferring data (i.e. both enabled and selected by the
arbiter). The direction field is left unset, since that
information is not normally retained by the DMA controller.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
Add a flag to the sequence structure that tells the driver it should
calibrate the ADC prior to initiating the sample.
Implement this for nRF SAADC. The implementation supports the
workarounds for PAN-86 and PAN-178.
Relates-to: issue #11922
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Allow user to set log level for UART console drivers. Add
log level option to UART pipe driver in order to see what it
is sending and receiving.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When removing a service using bt_gatt_service_unregister, its attributes
handles will keep their value which can cause a problem when adding the
service again to the GATT database.
When re-adding, the gatt_register routine is taking the last handle of
the GATT database to compare it with the handles of the service to be
added.
If a service has handles with a lower value than the last handle of
the database an error will occur.
If we add/remove/add the last service, no error will occur as its
handles are always greater than the last one of the database.
Instead of resetting the handles when unregistering a service and
reassign new ones we make sure that the handles of the services are
not in use in the GATT database in order to place the service back
where it used to be.
Signed-off-by: Arthur Crepin-Leblond <arthur.crepin@proglove.de>
This enables the ROM bootloader on the CC13x2 / CC26x2 LaunchPad
development boards. The bootloader can be started by holding BTN-1
during reset. This can be useful during development to recover a board
if DAPs get disabled.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
Several customer configuration (CCFG) settings are useful for
development and deployment. This commit adds support for setting CCFG
values via Kconfig. It follows TI's recommendation of setting CCFG
values and then including the TI provided CCFG. This commit includes
support for enabling the ROM bootloader and additional settings can be
added as needed.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
Implements hooks to implement user protocols in ull.c
A user defined init function can now be called, this code is gated by
the CONFIG_BT_CTLR_USER_EXT define.
A user defined PDU length can now also be defined using the Kconfig
CONFIG_BT_RX_USER_PDU_LEN
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
On boards that have the arm or nxp mpu, configure the mpu to allow flash
writes. Otherwise this test will fail with an mpu fault.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The HiFive1 and HiFive1 Rev B share the same clock initialization
code, so put it in soc/riscv32/riscv-privilege/sifive-freedom.
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
The HiFive1 Rev B adds the following features to the
original HiFive1:
- A second UART peripheral 'uart_1'
- A hardware I2C peripheral 'i2c_0'
- Segger J-Link OB
- An ESP32-WROOM attached to the 'spi_1' peripheral bus
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
The litex_timer driver used hard coded tick rate (set to 100 ticks
per second). This commit replaces the fixed value with a call to
system function which takes under account system configuration.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
There isn't a function to handle the unmount, so I implemented based
in f_mount comments. In the comments of f_mount we actually have
that f_mount is used to mount/unmount logic, is just necessary use
NULL pointer to fs argument.
Signed-off-by: Lucas Peixoto <lucaspeixotoac@gmail.com>
arm_core_mpu_enable() and arm_core_mpu_disable() functions are
effectively static functions, only used in the drivers for ARM
and NXP MPU, therefore, we do not need to expose them in the
arm_core_mpu_dev.h header.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In the wake of moving the internal API header arm_core_mpu_dev.h
into arch/arm/cortex_m/mpu, we need to explicitly declare the
arm_core_mpu_disable() function in the userspace test. Note that
arm_core_mpu_disable() (as any other function in this internal
API) is not supposed to be called directly by kernel/application
functions; an exception is allowed in this test suite, so we are
able to test the MPU disabling functionality.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
arm_core_mpu_dev.h is an internal API, and is not supposed to
be directly called by kernel / application functions, therefore,
we can move it inside arch/arm/core/cortex_m/mpu directory.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add documentation for the new GUI configuration interface in the
Application Development guide.
Also update all the images, touch up the language a bit, and tweak some
minor stuff:
- Say *.conf instead of .conf to make it clearer that .conf isn't the
literal name
- Add a missing -D<board> argument when running cmake
- Use figure:: instead of image::. Comes out left-aligned and with
space between the images, which looks nicer.
- Explain what '- -' and '-*-' means in the terminal menuconfig.
tkinter isn't included by default in many Python installations, despite
being part of the Python standard library, so also add the required
packages to the Development Environment Setup section of the manual. Add
a note to the Application Development section as well, to help
debugging.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This is a graphical configuration interface written in Tkinter. Like
menuconfig.py, it supports showing all symbols (with invisible symbols
in red) and jumping directly to symbols. Symbol values can also be
changed directly from the jump-to dialog.
This interface should feel a lot smoother than menuconfig.py on Windows.
When single-menu mode is enabled, a single menu is shown at a time, like
in the terminal menuconfig. Only this mode distinguishes between symbols
defined with 'config' and symbols defined with 'menuconfig'.
Compatible with both Python 2 and Python 3. Has been tested on X11,
Windows, and macOS.
To avoid having to carry around a bunch of GIFs, the image data is
embedded in guiconfig.py. To use separate GIF files instead, change
_USE_EMBEDDED_IMAGES to False. The image files can be found in
https://github.com/ulfalizer/Kconfiglib/tree/screenshots/guiconfig.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Update menuconfig (and Kconfiglib, just to sync) to upstream revision
7e0b9f7ae1, to get these commits in:
menuconfig: Improve space/enter behavior slightly
Space toggles value is possible, and enters menus otherwise. Enter
works the other way around.
Make this explicit in the code, which also fixes some corner cases,
like space doing nothing on a y-selected menuconfig symbol.
-------------------------------------------------------------------
menuconfig: Fix display issue for unsatisfied-deps selected symbol
with children
A symbol with unsatisfied direct dependencies can end up with visible
children in an implicit submenu if it is selected (though that
generates a warning), so the optimization in _shown_nodes() isn't
safe, and causes the child nodes to not be shown outside show-all
mode.
Just remove the optimization. Trying things out some more,
everything's plenty fast enough anyway.
Checking the direct dependencies of the parent instead would be safe.
The menu path now says "(Top)" instead of "(top menu)" too, which is a
bit more compact. Make the same change in genrest.py.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
All three boards use a Skyworks SPDT switch to control whether the
antenna is connected to a PCB antenna or an external u.FL connector.
None of them power up in a state that properly enables an antenna.
Add startup code to configure for the PCB antenna.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/14123
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
[mike@foundries.io: adjusted code to use Zephyr GPIO APIs. boron is
now also based on DTS.]
Signed-off-by: Michael Scott <mike@foundries.io>
Shell history module reworked to use ring buffer for storing
commands. Dedicated buffer is used to story all command lineary.
History capacity is in bytes not in number of entries, e.g.
many short commands can be stored or few long (depending on
CONFIG_SHELL_HISTORY_BUFFER).
Removed implicit command null termination from shell_history and
added it to shell after fetching command line from the history.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extend ring_buffer with following functions:
- getting capacity of the ring buffer (which is smaller than
buffer size)
- resetting ring buffer to initial state
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This stores a combination of a pointer and a CPU number in the low
2 bits. On 64-bit systems, the pointer part won't fit in an int.
Let's use uintptr_t for this purpose.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Add support of Seeed 2.8" TFT Touch Shield v2.0 to ILI9340 driver.
This driver supports color pixel formats of RGB888 and RGB565.
Signed-off-by: Bernard Lee <bernard.lee@nordicsemi.no>
soc_register.h is available in most of stm32 series.
It is sometime empty or contains includes to flash_registers.h,
which is included directly with direct reference in flash driver.
soc_register.h is also included in stm32 clock drivers, but this
driver do not use direct reference to any register anymore.
Clean up these files.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
