While recent browsers seem to transparently try to use https for
http://www.st.com/... URLs, they are effectively not working anymore, so use
https://www.st.com/... URLs instead.
curl http://www.st.com/en/evaluation-tools/nucleo-g070rb.html -m 5 -v
* Trying 104.89.117.48:80...
* Connected to www.st.com (104.89.117.48) port 80 (#0)
> GET /en/evaluation-tools/nucleo-g070rb.html HTTP/1.1
> Host: www.st.com
> User-Agent: curl/8.1.2
> Accept: */*
>
* Operation timed out after 5002 milliseconds with 0 bytes received
* Closing connection 0
curl: (28) Operation timed out after 5002 milliseconds with 0 bytes
received
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This is coming from devicetree and corrosponds to what we have in the
dts/bindings/vendor-prefixes.txt file.
This will allow for static filtering, especially with twister, i.e. no
need to build anything to know the vendor of a board
All of the vendor data was extracted automatically from the devicetree,
so some platforms might not have the right vendor or no vendor at all
right now, we need to fix some of the DTS information or do this
manually to get this 100% correct. But we are close.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- Updated basic samples READMEs to use the new zephyr:code-sample::
directive. Dropped "-sample" suffix that's not required anymore now
that samples have their own namespace.
- Updated all references to the samples to use the :zephyr:code-sample:
role. Checked and updated the wording of said references to account
for the fact that samples should not have "... sample" in their name
anymore.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add gpio-keys codes for all boards. These are mostly INPUT_KEY_0 and so
on but I've used some more specific ones where it was obvious that
there's something else on the boards.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add enabled vbat node for all boards of supported STM32 SoC series which
have the required adc node enabled.
Add volt-sensor alias pointing to said vref node.
Signed-off-by: Kenneth J. Miller <ken@miller.ec>
Add enabled vref node for all boards of supported STM32 SoC series which
have the required adc node enabled.
Add volt-sensor alias pointing to said vref node.
Signed-off-by: Kenneth J. Miller <ken@miller.ec>
stm32cubeprogrammer runner takes a --reset-mode argument to specify the
type of reset used in the flashing process.
Though, argparse default configuration in python allows shortened command
arguments and it happened that --reset was used on most boards instead
of --reset-mode.
This argparse configuration is being changed in order to prevent shortened
command args (see #53495). As a consequence all board configs using
--reset should be updated to use the full length version.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The STM32G081b has two UCPD peripherals. This commit adds UCPD1
to the DTS so both peripherals can be used.
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
Implementing USB-C Sink functionality can be difficult.
This sample application serves as an example of how
to create an application with Power Delivery Sink
functionality.
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
Remove USB-C VBUS2 Discharge configuration node from device tree.
USBC VBUS discharge is controlled by the vbus driver.
See dts/bindings/usb-c/vbus-adc.yaml
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
Assign the pins for the STM32G071b and STM32G081b STM32
UCPD peripherals so the UCPD driver can properly
configure the device.
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
The boards folder uses ~142.8 MB, being the largest in the repository.
This is due mostly to board images, which are in most cases not
optimized for web content. This patch tries to address this problem by
converting all pictures to JPEG (quality 75) and by adjusting its size
up to 750 px (the width of the documentation content). Images that
specified a fixed width in rst files are converted down to that value
instead.
With this patch, folder goes down to ~53.5 MB from 142.8 MB (-~63%).
Note that this patch introduces a new set of binary files to git
history, though (bad).
The process has been automated using this quickly crafted Python script:
```python
from pathlib import Path
import re
import subprocess
def process(doc, image, image_jpeg, size):
subprocess.run(
(
f"convert {image}"
"-background white -alpha remove -alpha off -quality 75"
f"-resize {size}\> {image_jpeg}"
),
shell=True,
check=True,
cwd=doc.parent,
)
if image != image_jpeg:
(doc.parent / image).unlink()
for doc in Path(".").glob("boards/**/*.rst"):
with open(doc) as f:
content = ""
image = None
for line in f:
m = re.match(r"^(\s*)\.\. (image|figure):: (.*)$", line)
if m:
if image:
process(doc, image, image_jpeg, size)
image = Path(m.group(3))
if image.suffix not in (".jpg", ".jpeg", ".png"):
content += line
image = None
continue
image_jpeg = image.parent / (image.stem + ".jpg")
size = 750
content += (
f"{m.group(1)}.. {m.group(2)}:: {image_jpeg}\n"
)
elif image:
m = re.match(r"\s*:height:\s*[0-9]+.*$", line)
if m:
continue
m = re.match(r"\s*:width:\s*([0-9]+).*$", line)
if m:
size = min(int(m.group(1)), size)
continue
content += line
if line == "\n":
process(doc, image, image_jpeg, size)
image = None
else:
content += line
with open(doc, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add alias to boards with watchdog enabled to facilitate the
move of samples/drivers/watchdog to use DT_ALIAS.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Support the ST STM32G081B Evaluation board with STM32G081RB SoC
Tested with:
- `samples/basic/blinky`
- `samples/basic/button`
Flashed samples via On-Board ST-LINK with:
- west flash
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
