In most cases these were defined as 1. Saving one byte for the rest
doesn't really justify the added complexity that comes with these
options. Removing them also simplifies the interface between HCI
transports/drivers and the host stack, which in turn helps pave the way
for having HCI as a proper Zephyr driver API.
Fixes#71907
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Instead of chapters, make device runtime power management and
system-managed device power management sections.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
There is a whole section dedicated to power domains. The brief
information in device power management was not adding anything.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Rename the Kconfig symbol for all ITE SoC variants.
Rename the SOC_SERITES_ITE_IT8XXX2 to SOC_SERIES_IT8XXX2.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
This enhances the description of i.MX8MPlus SoC with the Cadence HIFI4
core and thus will make this example more relevant to the benefits of
HWMv2.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
LinkServer does not set a breakpoint at reset by default when debugging
platforms, so if the user single steps after loading an application they
will likely step through ROM code for the target. Add a note clarifying
that users need to set a breakpoint at the reset handler or "main" in
order to pause their application there.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
As of now only the resume action is supported, and doesn't perform
any power action on the GNSS modem.
It allows to initialize the GNSS driver later than it would otherwise
be.
Also, the driver now runs a modem-specific chat script on resumption.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The adc sample was in the root directory of the adc samples.
Move all the files to a subdirectory adc_dt.
Signed-off-by: Paulo Santos <pauloroberto.santos@edge.ufal.br>
Major development work is concluded for Twister tests.
We should release appropriate information.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This will allow expansion of various ZTEST macros to display the actual
test function rather than the ZTEST macro itself.
Inspired by a change in #71402 by @gmarull.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Deprecate the advertiser options `BT_LE_ADV_OPT_USE_NAME` and
`BT_LE_ADV_OPT_FORCE_NAME_IN_AD`.
Reasons:
- It is out of place in the advertiser options, as it acts on
advertising data and not configuration
- The behavior is not clear. All of these are trick questions:
- where does the data for the name go?
- do I have to allocate memory for this?
- does it work the same in legacy vs extended advertising?
- The trade-off between UX improvement and extra complexity in the host
is debatable. Hundreds of lines in the stack to avoid making the user
type out less than ten.
Also deprecate the following macros that uses those options:
- `BT_LE_ADV_CONN_NAME`
- `BT_LE_ADV_CONN_NAME_AD`
- `BT_LE_ADV_NCONN_NAME`
- `BT_LE_EXT_ADV_CONN_NAME`
- `BT_LE_EXT_ADV_SCAN_NAME`
- `BT_LE_EXT_ADV_NCONN_NAME`
- `BT_LE_EXT_ADV_CODED_NCONN_NAME`
Update the migration guide and the release note for Zephyr 3.7 to
describe those changes.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The advertiser options to automatically add the name in the scan
response and the advertising data will be deprecated.
Update the Bluetooth shell and its documentation to not use those
options anymore.
The option of the legacy advertiser run with `bt advertise` and the
behavior hasn't changed. The code has been updated to no longer use the
advertiser option but the original behavior has been reproduced.
The option of the extended advertiser have been updated to be more
explicit. The options `name` and `name-ad` have been removed from the
`bt adv-create` and `bt adv-param`. The option `name` and `dev-name`
have been added to the `bt adv-data` command.
- `name <str>` will advertise the given name.
- `dev-name` will advertise the device name.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Adds some documentation about the Xtensa HiFi AudioEngine DSP and
how to enable its use with Zephyr.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Add POSIX FD_MGMT option and mark ftruncate as supported
in POSIX Option group Documentation
Signed-off-by: Karthikeyan Krishnasamy <karthikeyan@linumiz.com>
Deprecate ETH_MCUX, by:
- Marking it as DEPRECATED in Kconfig, obviously.
- Unmarking the new driver as experimental.
- Putting the new and old drivers in the same folder.
- Reworking the menu appearance of the driver selection.
Note that technically now it is possible to choose the wrong
driver than what is enabled in DT, this is intentional, but
the correct one will obviously be enabled by default.
- Convert all sample overlays to the new Kconfigs. This was
part of the motivation for the shared overlays, as it was
causing twister/CI logs to look ugly and misleading due
to Kconfig warnings.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Added a newline to display the list correctly
The list is displayed like:
MIPI DBI defines 3 interface types: * Type A: Motorola 6800 parallel bus
* Type B: Intel 8080 parallel bus
But it should be like:
MIPI DBI defines 3 interface types:
* Type A: Motorola 6800 parallel bus
* Type B: Intel 8080 parallel bus
This was fixed by an example from another doc:
doc/hardware/peripherals/i3c.rst
Signed-off-by: Dmytro Yaskov <dmytro.v.yaskov@gmail.com>
The current diagram uses a custom font that does not render correctly on
some browsers. Replace it with a common font (Courier New) instead so
that there are no rendering issues.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Minor update to existing zspdx implementation to add support for
PrimaryPackagePurpose introduced in SPDX 2.3.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
LE Audio sticks out in a few ways that's worth knowing
not only as a contributor, but also as an application
developer. These things have been documented, and may be
expanded upon later.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modifies the audio configuration (ac) commands for CAP
and GMAP to use the default presets instead of supplying
the preset as arguments. This will allow the user to
use the `bap preset` command to configure everything in the
codec configuration before the AC commands are issued.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add notes on how the LE Audio stack is designed and why data is
sometimes placed and controlled by the stack or the application.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The following changes:
- Generally reword all the paragraphs to hopefully by clearer and
easier to read by using more straighforward and direct wording,
and avoiding run on sentences and ambiguous/wrong grammar, etc.
- Move Examples to the bottom of the page.
- Fix a typo in the code expression where there was an extra
parentheses.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Mention the new can_get_bitrate_min() and can_get_bitrate_max() CAN
controller API functions along with the deprecating of the existing
can_get_min_bitrate() and can_get_max_bitrate().
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The directory name in boards has been changed with the addition of
support for Arduino UNO R4 WiFi, so add a redirect from
boards/arduino/uno_r4_minima to boards/arduino/uno_r4.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Remove IPSP support from the tree.
It has no maintainers, and is regularly broken. The fact that it's
nontrivial to set-up in linux makes it hard to fix reported issues.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Update the Zephyr `gdbstub` documentation with its 'how to use'
example to align with former sample application replaced by the test.
Fixes: zephyrproject-rtos#70966
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
This test is intended to teach the conventions and best practices to a
potential contributor that wants to add a test, for say a new feature.
It is liberally commented on purpose, so new contributors don't have to
spend two weeks understanding the intricacies of the simulator, the bsim
test framework, the native builds, backchannels, etc..
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
The cap_initiator unicast_stop command will now stop
all streams by default, without supplying the "all" argument.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
