Zephyr-specific files in mcuboot break when the drivers subdirectory
is no longer present in the include path.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
A Zephyr-specific file breaks when the drivers subdirectory is no
longer present in the include path.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
ELM FatFS implementation supports LFN, enabled via ffconf.h
configuration file. Additionally, code page (character set),
max file name length, and memory mode (LFN working buffer location)
are configurable options closely related to LFN.
Without LFN filenames are restricted to 8.3 filename format.
Add kconfig options to expose following FatFS configurations:
enable LFN, specify max filename length, specify code page
(character set), specify LFN working buffer location.
Signed-off-by: Audun Korneliussen <audun.korneliussen@nordicsemi.no>
NFFS support repository reference was removed
as unneeded anymore by removal of NFFS support in the codebase.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Include the CANopenNode CANopen stack as a module in Zephyr.
CANopenNode is licensed under the Apache-2.0 license.
This fixes#15278.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
generated_dts_board.h is pretty redundant and confusing as a name. Call
it devicetree.h instead.
dts.h would be another option, but DTS stands for "devicetree source"
and is the source code format, so it's a bit confusing too.
The replacement was done by grepping for 'generated_dts_board' and
'GENERATED_DTS_BOARD'.
Two build diagram and input-output SVG files were updated as well, along
with misc. documentation.
hal_ti, mcuboot, and ci-tools updates are included too, in the west.yml
update.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
OpenThread settings implementation built on top of Zepyhr settings
submodule.
With this solution, OpenThread settings are identified with keys of
the following format: `ot/id/instance`, where `id` is assigned by
OpenThread stack, and `instance` is a 32-bit random number, both in
hex. The implementation makes use of `settings_load_subtree_direct`
function to iterate over settings instances. This allows the
OpenThread settings layer to be a fully transparent shim layer between
OpenThread/Zephyr APIs.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Update hal_stm32 to new version including latest STM32Cube packages.
Includes the following:
- stm32cube: update stm32wb to version V1.3.0 (commit 374333f)
- stm32cube: update stm32g0 to version V1.3.0 (commit e209cea)
- stm32cube: update stm32f0 to version V1.11.0 (commit 08833e5)
- stm32cube: update stm32f3 to version V1.11.0 (commit 2a412a4)
- stm32cube: update stm32h7xx cube version to V1.5.0 (commit a08d1dc)
- stm32cube: update stm32f2xx cube version to V1.8.0 (commit b4226d5)
- stm32cube: update stm32f1xx cube version to V1.8.0 (commit a515c67)
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Gets these commits in:
check_compliance.py: Detect refs to undef. symbols in samples and
tests
Extend the check for references to undefined Kconfig symbols to also
detect undefined symbols in samples and tests.
Samples and tests were skipped due to using separate Kconfig trees,
which hid the symbols defined in them. Work around it by grepping
for Kconfig symbol definitions in them instead.
Keep properly parsing the main Kconfig tree, as it's needed to see
symbol names that are stitched together with the Kconfig
preprocessor.
------------------------------------------------------------------
check_compliance.py: Detect bad header comments and other nits
Add a generic kitchen-sink Nits test for various minor nits that
aren't already covered by tools like checkpatch.pl and pylint. So
far checks this:
- Header comments in Kconfig files
- Missing newlines at the end of various source files (probably a
bad editor setting)
- Leading/trailing blank lines in files
------------------------------------------------------------------
check_compliance.py: Kconfig: Flag redundant $ZEPHYR_BASE in
'source'
'source's like
source "$(ZEPHYR_BASE)/Kconfig.zephyr"
can be simplified to
source "Kconfig.zephyr"
since $srctree already points to the Zephyr root.
Flag it in the Nits test.
This also avoids absolute paths showing up in some places.
------------------------------------------------------------------
check_compliance.py: Improve error reporting for Git commands
Similar improvements to
https://github.com/zephyrproject-rtos/zephyr/pull/21577. No custom
potentially-missing working directory is used here, but always
including the exception message still feels more robust.
Use err() instead of sys.exit() in git(), and have it include the
command name, which is helpful in logs.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
hal_nordic required update in ieee802154 radio driver which
is controlling the clock.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Get this commit in, needed to pass CI with the doc changes in this PR:
check_compliance.py: Add STACK_SIZE to Kconfig symbol whitelist
Needed for https://github.com/zephyrproject-rtos/zephyr/pull/20722.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit removes the hard coded mbed TLS library name
`lib..__modules__crypto__mbedtls.a` in top-level CMakeLists.txt file
and instead uses zephyr_library_app_memory function.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Follwing the convention in Zephyr, all CMake configuration related to
a module, should be placed within the module repostiory.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
MCUBoot is the bootloader on which zephyr DFU solutions
base. It is worth to reference certain compatible version
of this external project. So fare it was expected that
mcuboot works with zephyr in master to master relation. This patch
starts to give the user real information about compatible version.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
OpenThread recently introduced CMake build system into its repostiory
so we no longer need autotools to build OpenThread libraries and can
integrate them natively.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Renames the lpc usart shim driver to more accurately reflect the
flexcomm hardware IP and to prepare for instantiating it on an SoC
outside the LPC family.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fetch HW models from a new west module.
And, remove all pre-west glue which was used to:
* Fetch them in CI
* Validate their vesion
* Modify the include path and link to them
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Update west.yml to point to newer versions of fatfs, nffs, and mcumgr
to pull in fixes for using proper include files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Get this commit in:
check_compliance.py: Run the dtlib/edtlib test suites on Python 3.5
Will work once
https://github.com/zephyrproject-rtos/zephyr/pull/20597 is in. CI
uses Python 3.5, so they have been skipped until now.
That PR is in now.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Update Zephyr manifest so it picks the tip of hal_nordic.
Signed-off-by: Bartosz Sokolski <bartosz.sokolski@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
There are a couple of commits that are needed for
the BLE SW LL to function properly on the VEGABoard:
- TRNG entropy driver
- GenFSK radio enablement + configuration
As such, make sure that the commit in the manifest
points to the appropriate SHA in the hal/openisa
repo.
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Update the hal_nordic module revision to switch to nrfx 2.0.0.
Add Kconfig options that enable to use the newly introduced nrfx
drivers in Zephyr.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
There is no imx ccm shim driver in drivers/clock_control. This config
was only used to conditionally compile nxp hal drivers, even though the
imx6/7 soc init always needs them.
Updates the nxp hal to unconditionally compile the ccm drivers and
removes the unnecessary config symbol.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Remove unnecessary inclusion of offsets_short.h in the LPC54114
start-up code.
See zephyrproject-rtos/hal_nxp#17.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Get this commit in:
check_compliance.py: Run pylint on scripts/sanitycheck
https://github.com/zephyrproject-rtos/zephyr/pull/20212 fixes the
last pylint warnings in the script. Once that one is in, this can be
merged.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add SPI driver and bindings for LPSPI peripheral for the RV32M1 SOC.
Based heavily on the existing mcux LPSPI driver.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
Use the newest version of the OpenThread project, as updated in
https://github.com/zephyrproject-rtos/openthread/pull/2.
Introduce the following fixes along with the update (they're squashed to
retain bisectability of OT samples):
* Update configs and flags used
Some OT configs were renamed, some new were introduced that Zephyr port
needs to set.
* Add entropy platform driver
OpenThreads `random` platform subsystem was replaced with `entropy`
subsystem which is supposed to serve as an entropy source for the
generic OpenThread's random generator.
* Halt OT thread when OT command is processed
OpenThread can currently be processed from two threads - a
genuine OpenThread thread and shell thread, which processes CLI
commands. This could cause trouble, when context was switched
during OT command processing (i.e. switched to process an incomming OT
message, while still in unfinished command handler).
In result, it was not possible to turn the commissioner role on via
CLI, as the commissioner petition response was handled before the
Commissioner::Start function finished its execution (if the
petitioner is also the network leader, all messages are passed
internally within the stack).
Fix this by suspending the OT thread for the time of an OT command
processing.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Updated mbedtls reference to take in:
native: debug: Set speed optimization if ASAN is used
(zephyrproject-rtos/mbedtls#4)
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Align all sensor drivers that are using stmemsc (STdC) HAL i/f
to new APIs of stmemsc v1.02.
Requires https://github.com/zephyrproject-rtos/hal_st/pull/3
Signed-off-by: Armando Visconti <armando.visconti@st.com>
