A proper netmask should be set on the loopback interface, so that
source address selection work properly when there are multiple
interfaces in the system.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
CPU_HAS_NRF_IDAU is depending on SOC_SERIES_NRF91X and
SOC_NRF5340_CPUAPP.
This makes it more difficult to have an out-of-tree nrf SOC.
It is also an unnecessary dependency. There is no prompt for
CPU_HAS_NRF_IDAU, so it will not show up in menuconfig and it won't be
possible to enable it from a users Kconfig fragment.
The only way to enable it is to select it, and those that select this
option can themselves make sure that they only do so when appropriate.
Also, move NRF_SPU options out to SOC Kconfig files to also make
out-of-tree SoCs possible. With the added benefit of not polluting the
common soc/arm/Kconfig.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add "container struct type pointer" description
to SYS_DLIST_FOR_EACH_CONTAINER() and SYS_DLIST_FOR_EACH_CONTAINER_SAFE().
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Add Renesas rzt2m gpio driver with basic functionality.
It supports pin mode configuration and writing/reading to/from gpio ports.
Includes dts changes to build blinky sample.
Signed-off-by: Jakub Michalski <jmichalski@internships.antmicro.com>
This adds a new driver for Renesas RZ/T2M.
The driver allows configuration of pin direction,
pull up/down resistors, drive strength and slew rate,
and selection of function for a pin.
Signed-off-by: Wojciech Sipak <wsipak@antmicro.com>
This adds a UART driver for the Renesas RZ/T2M
Serial Communication Interface.
The driver implements:
* Polling API,
* Interrupt-driven API.
Signed-off-by: Wojciech Sipak <wsipak@antmicro.com>
This adds a new SoC: SOC_RENESAS_RZT2M
and a new board: rzt2m_startek_kit
Signed-off-by: Wojciech Sipak <wsipak@antmicro.com>
Co-authored-by: Roman Dobrodii <rdobrodii@antmicro.com>
Move the input_kbd_matrix.h header out of drivers/ and into include/,
this allows external drivers to use it and doxygen to pick it up.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add a input_kbd_matrix doxygen group and add this to the other Input
APIs page, add few missing argument documentation entries.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The API field of input_kbd_matrix_common_config should have been a
pointer from the start, clang-16 caught this with a compiler warning.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Change the row-count and col-count to be optional in the generic
binding, add a second pair of macro to allow the implementation to
specify the numbers from a different property.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The "keyup" event is not triggered when pasting with mouse (right click,
paste) or when pasting on a phone/tablet.
Signed-off-by: Xudong Zheng <7pkvm5aw@slicealias.com>
The current implementation of ZBUS_CHAN_DECLARE is not compatible with
C++. It fixes the bug by adding the extern keyword at the channel
definition which will work for both C and C++.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
This allows XIP to be disabled for applications that execute in
RAM, which do not need XIP support from flash
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
For several samples that today have native_sim
enabled, enable them also for native_sim.
And set native_sim as default integration_platform
instead of native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Enable native_sim in the sample yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Enable native_sim in the sample yaml, and switch
integration_platform
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Provide overlays for native_sim
* Enable native_sim in the sample yaml
* Remove native_posix from the sample yaml platform_allow as it was
filtered out by the host libC
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Provide overlays for native_sim
* Enable native_sim in the test yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc and shell script,
replace native_posix references with native_sim
* Provide overlays for native_sim(_64)
* Enable native_sim in the test yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's replace the references to native_posix with native_sim.
Background: during this release native_sim is replacing
native_posix as the main host test/development platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Rename
Networking with native_posix
to
Networking with native_sim
replace all links to this page accordingly
and replace its references to native_posix with native_sim.
Background: during this release native_sim is replacing
native_posix as the main host test/development platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Provide an overlay for native_sim
* Enable native_sim in the test yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Provide an overlay for native_sim
* Enable native_sim in the test yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This adds test for ASE state notification retry. The test verifies
whether the state transition is repeated if failed due to notification
error.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds retry logic for ASE state notifications if failed due to
insufficient number of buffers to send ATT PDU. The state transition is
retried after connection interval delay.
Fixes: #64574
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds k_work_schedule mock implementation that will be used in
bluetooth audio unit tests.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The use case is to have a netbuf pool that is used exclusively with
net_buf_alloc_with_data() where the destroy callback takes care of
freeing the actual data buffer pointed to by __buf.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
