While recent browsers seem to transparently try to use https for
http://www.st.com/... URLs, they are effectively not working anymore, so use
https://www.st.com/... URLs instead.
curl http://www.st.com/en/evaluation-tools/nucleo-g070rb.html -m 5 -v
* Trying 104.89.117.48:80...
* Connected to www.st.com (104.89.117.48) port 80 (#0)
> GET /en/evaluation-tools/nucleo-g070rb.html HTTP/1.1
> Host: www.st.com
> User-Agent: curl/8.1.2
> Accept: */*
>
* Operation timed out after 5002 milliseconds with 0 bytes received
* Closing connection 0
curl: (28) Operation timed out after 5002 milliseconds with 0 bytes
received
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This is coming from devicetree and corrosponds to what we have in the
dts/bindings/vendor-prefixes.txt file.
This will allow for static filtering, especially with twister, i.e. no
need to build anything to know the vendor of a board
All of the vendor data was extracted automatically from the devicetree,
so some platforms might not have the right vendor or no vendor at all
right now, we need to fix some of the DTS information or do this
manually to get this 100% correct. But we are close.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- Updated basic samples READMEs to use the new zephyr:code-sample::
directive. Dropped "-sample" suffix that's not required anymore now
that samples have their own namespace.
- Updated all references to the samples to use the :zephyr:code-sample:
role. Checked and updated the wording of said references to account
for the fact that samples should not have "... sample" in their name
anymore.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The nucleo evaluation boards can be enhanced with shields for additional
functionality. Flat device tree overlays can be used to configure and
support these shields. Regrettably leds can not be simply added due to
a missing label. Tag leds with a label.
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Reviewed-by: Vasilij Strassheim <v.strassheim@linutronix.de>
Add gpio-keys codes for all boards. These are mostly INPUT_KEY_0 and so
on but I've used some more specific ones where it was obvious that
there's something else on the boards.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
So far pin identifiers were named after CN7 and CN10 connector names on
Nucleo-64 boards. In case of Nucleo-144 there are ST Morpho connectors on
both sides, but bigger (up to 72 instead of 38 pins on each side). First 38
pins out of 72 on each side usually map to the same pins (e.g. PA5 being
13th pin on right ST Morpho connector). This means that single ST Morpho
connector definition will suffice.
Leaving CN7 and CN10 (name of pin headers on Nucleo-64 boards) is confusing
in context of Nucleo-144 boards, since corresponding pin headers are named
CN11 and CN12.
Rename:
* s/ST_MORPHO_CN7_/ST_MORPHO_L_/
* s/ST_MORPHO_CN10_/ST_MORPHO_R_/
so that pin identifiers make more sense in context of Nucleo-144 boards.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Add die_temp0 alias for all the STM32 boards that already enable the
temperature sensor so that the die_temp_polling samples can be used.
Also enable die_temp for two boards that are supported by the
stm32_temp_sensor sample.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Use latest STM32 HAL to have the new STM32F1xx PWM inputs.
Also update the existing boards with correct new PWM outputs definition
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Add LSI clock and RTC clock source for Nucleo F103RB, L4A6ZG and
F103 mini to resolve a regression concerning the RTC counter
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
With latest version of openocd delivered in Zephyr SDK 0.15.0,
a new configuration is required to flash and debug this board:
"reset_config connect_assert_srst" allows to flash the board
The new "init" function allows to run debug.
Fixes#50590 for this specific board
Note that other boards might be also impacted by this new version
of openocd but a revert of zephyrproject-rtos/openocd@98d9f11 allows
to get back to the previous status.
A new Zephyr SDK release (V0.15.1) will be available with a revert of
this commit. Unfortunately this has no impact on nucleo_f103rb. Hence
this change.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The boards folder uses ~142.8 MB, being the largest in the repository.
This is due mostly to board images, which are in most cases not
optimized for web content. This patch tries to address this problem by
converting all pictures to JPEG (quality 75) and by adjusting its size
up to 750 px (the width of the documentation content). Images that
specified a fixed width in rst files are converted down to that value
instead.
With this patch, folder goes down to ~53.5 MB from 142.8 MB (-~63%).
Note that this patch introduces a new set of binary files to git
history, though (bad).
The process has been automated using this quickly crafted Python script:
```python
from pathlib import Path
import re
import subprocess
def process(doc, image, image_jpeg, size):
subprocess.run(
(
f"convert {image}"
"-background white -alpha remove -alpha off -quality 75"
f"-resize {size}\> {image_jpeg}"
),
shell=True,
check=True,
cwd=doc.parent,
)
if image != image_jpeg:
(doc.parent / image).unlink()
for doc in Path(".").glob("boards/**/*.rst"):
with open(doc) as f:
content = ""
image = None
for line in f:
m = re.match(r"^(\s*)\.\. (image|figure):: (.*)$", line)
if m:
if image:
process(doc, image, image_jpeg, size)
image = Path(m.group(3))
if image.suffix not in (".jpg", ".jpeg", ".png"):
content += line
image = None
continue
image_jpeg = image.parent / (image.stem + ".jpg")
size = 750
content += (
f"{m.group(1)}.. {m.group(2)}:: {image_jpeg}\n"
)
elif image:
m = re.match(r"\s*:height:\s*[0-9]+.*$", line)
if m:
continue
m = re.match(r"\s*:width:\s*([0-9]+).*$", line)
if m:
size = min(int(m.group(1)), size)
continue
content += line
if line == "\n":
process(doc, image, image_jpeg, size)
image = None
else:
content += line
with open(doc, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
-Enable the die-temp capabilities of ADC in each dts file of stm32
boards where it is available.
-Execute the testcase running the samples/sensor/stm32_temp_sensor on each
available target board.
Signed-off-by: TLIG Dhaou <dhaou.tlig-ext@st.com>
Add alias to boards with watchdog enabled to facilitate the
move of samples/drivers/watchdog to use DT_ALIAS.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
The goal of this commit is to update existing STM32 boards descriptions
to use these size "DT_SIZE" macros to enhance readability. To realize this
i used a python script, which will detect the STM32 Boards
/zephyr/board/arm, and then will update in the dts files the partition
description using "DT_SIZE_K" and "DT_SIZE_M" macros.
Check manually and modify in .overlay files in samples and tests.
Signed-off-by: TLIG Dhaou <dhaou.tlig-ext@st.com>
Now that all drivers and all boards have been converted to the
use of PINCTRL, remove usage of PINMUX.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add the pinctrl state name (default) for the PWM peripherals.
Changes performed based on the script proposed in
"boards: arm: stm32: add pinctrl state name for UART peripheral"
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add the pinctrl state name (default) for the CAN peripherals.
Changes performed based on the script proposed in
"boards: arm: stm32: add pinctrl state name for UART peripheral"
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add the pinctrl state name (default) for the I2C peripherals.
Changes performed based on the script proposed in
"boards: arm: stm32: add pinctrl state name for UART peripheral"
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add the pinctrl state name (default) for the ADC peripherals.
Changes performed based on the script proposed in
"boards: arm: stm32: add pinctrl state name for UART peripheral"
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add the pinctrl state name (default) for the UART/USART/LPUART
peripherals. Changes performed using the following Python script run
from the repository root:
```
from pathlib import Path
import re
for fpath in Path(".").glob("boards/arm/**/*.dts"):
lines = open(fpath).readlines()
is_stm32 = False
for line in lines:
if "stm32" in line:
is_stm32 = True
break
if not is_stm32:
continue
with open(fpath, "w") as f:
for line in lines:
f.write(line)
m = re.match(r"(\s+)pinctrl-0.*us?art.*", line)
if m:
f.write(m.group(1) + "pinctrl-names = \"default\";\n")
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Enable the pin control driver on all STM32 based boards. The following
script has been used to do this task:
```
from pathlib import Path
import re
for fpath in Path(".").glob("boards/arm/**/*_defconfig"):
lines = open(fpath).readlines()
is_stm32 = False
for line in lines:
if "CONFIG_SOC_SERIES_STM32" in line:
is_stm32 = True
break
if not is_stm32:
continue
lines += ["\n", "# enable pin controller\n", "CONFIG_PINCTRL=y\n"]
with open(fpath, "w") as f:
f.writelines(lines)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Prescaler was misplaced in pwm binding, instead of timers binding.
For example, TIM6/TIM7 doesn't have PWM capability,
but have a prescaler.
This change also prepares the introduction of timer based counter
(which requires prescaler at timer level)
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Enabling flash support for nucleo-f103rb in device tree.
This has been tested with flash sample application on
nucleo-f103rb platform.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
CLOCK_STM32_PLL_XTPRE Kconfig symbol default value is n.
Then there is no need to explicitly set it to 'n' in stm32f1 boards
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following migration of pinctrl configuration from pinmux.c files
to device tree and deprecation of pinctrl defines, remove
pinmux.c files when possible.
Additionally remove the CMakeLists.txt files when it makes sense.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
I2C1 pin configuration requires to enable remap on I2C1 pins.
Now this is transparent, it could be done easily, so enable
and configure pins for I2C1 on this board to enable arduino I2C.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Move SPI pin configuration to device tree for all STM32 based
boards.
This should not bring any change in pin configuration.
Though, some adjuments have been made on following boards for
coherency:
* b_l4s5i_iot01a1: Removed "very-high-speed" on SPI3 MOSI pin.
Tested with no impact.
* black_f407zg_pro: SPI1 pins configured but not SPI1 node.
Removed pin config as not documented neither.
* sensortile_box: SPI2 pins configured but not SPI2 node.
Removed pin config as not documented neither.
* nucleo_g431rb/nucleo_g474re/nucleo_l476rg/nucleo_l4r5zi:
SPI2 and SPI3 pins were configured but missing.
Added since they were documented.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Use the new DT facilities to configure ADC pinmux on all boards with
STM32 MCUs currently supporting the ADC.
Signed-off-by: Martin Jäger <martin@libre.solar>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
CLOCK_STM32_PLL_XTPRE Kconfig symbols was made to differentiate
code between F1 soc variants with XTRE and others.
It appears that specific XTRE code handling is already in place in
LL_PLL_ConfigSystemClock_* functions that are called afterwards.
Since this piece of code is not required anymore, let's remove
the symbol.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In order to avoid pin configuration conflicts between peripherals,
add CONFIG_ADC flag to for each adc pinmux configuration.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In order to avoid pin configuration conflicts between peripherals,
add CONFIG_PWM flag to for each pwm pinmux configuration.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In order to avoid pin configuration conflicts between peripherals,
add CONFIG_SPI flag to for each spi pinmux configuration.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In order to avoid pin configuration conflicts between peripherals,
add CONFIG_SERIAL flag to for each serial pinmux configuration.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Several reviewers agreed that DT_HAS_NODE_STATUS_OKAY(...) was an
undesirable API for the following reasons:
- it's inconsistent with the rest of the DT_NODE_HAS_FOO names
- DT_NODE_HAS_FOO_BAR_BAZ(node) was agreed upon as a shorthand
for macros which are equivalent to
DT_NODE_HAS_FOO(node) && DT_NODE_HAS_BAR(node) &&
- DT_NODE_HAS_BAZ(node), and DT_HAS_NODE_STATUS_OKAY is an odd duck
- DT_NODE_HAS_STATUS(..., okay) was viewed as more readable anyway
- it is seen as a somewhat aesthetically challenged name
Replace all users with DT_NODE_HAS_STATUS(..., okay), which is
semantically equivalent.
This is mostly done with sed, but a few remaining cases were done by
hand, along with whitespace, docs, and comment changes. These special
cases include the Nordic SOC static assert files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
