Remove `IEEE802154_SELECTIVE_TXPOWER` option.
Cache the tx power value in nRF5 driver and make use of it on each
operation.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
This commit adds a new Kconfig for the nRF 802.15.4 radio driver that
allows the user to specify the number of encryption keys the driver can
simultaneously store.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
There are multiple Kconfig symbols that are only available when the
radio hardware is present. As a result, the nRF 802.15.4 radio driver
is more difficult to configure on multicore architectures. Also, such
solution goes against the principle of hiding the details of the
platform behind the driver's interface.
This commit moves all the Kconfig options that correspond to settings
present in common nRF 802.15.4 configuration header so that they're
available no matter if the API is serialized.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
This commit introduces `kconfig_to_ot_option` to simply fye the way of
adding openthread related kconfigs.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
Introduce possibility to override `NRFX_DIR` sybol from hal_nordic's
CMakeLists.txt file that specifies source dir for the nrfx drivers.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
The LIS2DU12 is a linear 3-axis accelerometer with advanced digital
functions whose MEMS and ASIC have been expressly designed to build
an outstanding ultralow-power architecture in which the anti-aliasing
filter operates with a current consumption among the lowest in the
market.
This driver is based on stmemsc HAL i/f v2.3
https://www.st.com/en/datasheet/lis2du12.pdf
Signed-off-by: Armando Visconti <armando.visconti@st.com>
This commit replaces a magic number in the definition of serialization
ring buffer length with a macro provided by the 802.15.4 driver.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
IEEE 802.15.4-2020 defines four possible values for Key Identifier Mode
field of the Auxiliary Security Header. The current ieee802154 driver
API only supports two of them: b00 and b01. This commit adds support for
the two remaining Key Identifier Mode values. It's done by replacing a
field that can only hold Key Index into a field that can holds a pointer
to the entire Key Identifier field.
See IEEE 802.15.4-2020, sections 9.4.2.3 and 9.4.4 for further reference.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
We follow the path of the header to define the guard, aarch32 was
removed some time ago and the guards still had AARCH32 in them, just
remove it and keep the guard consistent and short.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enforce that the initial attestation partition has the required
initial attestation key provisioned.
If the initial attestation key (IAK) is not present during boot of
TF-M the system will panic during initialization.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Introduce Kconfig option in zephyr build system that reflects the TF-M
cmake config variable with the same default value for dummy provisioning
and have it satisfy the IAK present requirement.
This configuration is not suitable for production, and by having this
in zephyr configuration we can have this as part of the hardened
configuration check.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
build_info.h of mbedtls includes the config file for mbedtls but
also includes check_config.h so its not needed to have it in the
config file
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
Update prompt for profile type not set, make it appear in a similar
way as the rest of the options in the choice.
Add in parethesis "base", which is how this referred to in the upstream
TF-M documentation.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Recent nRF 802.15.4 Radio Driver provides assert abstraction layer.
The assert abstraction layer is implemented in Zephyr in following
ways depending on the `NRF_802154_ASSERT_CHOICE` Kconfig choice.
`NRF_802154_ASSERT_ZEPHYR_MINIMAL` (default) gives ability to still
perform run-time checking of the nRF 802.15.4 Radio Driver operation
with minimum memory overhead and configurable behavior on fault
detection regardless of the `CONFIG_ASSERT` Kconfig option value.
`NRF_802154_ASSERT_ZEPHYR` gives ability to use asserts provided and
configurable by Zephyr including the ability to turn off the run-time
checking of the nRF 802.15.4 Radio Driver operation.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
This commit adds bbtc implementation.
New file in modules/openthread/platform/ble.c
New corresponding kconfig option `OPENTHREAD_BLE_TCAT`.
Co-authored-by: Piotr Jasiński <piotr.jasinski@nordicsemi.no>
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
Signed-off-by: Piotr Jasiński <piotr.jasinski@nordicsemi.no>
This commit bumps openthread commit to `4ed44bc`
and implements `CONFIG_OPENTHREAD_MULTIPAN_RCP` option.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
The TF-M build uses the vanilla CMake FindPython3 mechanism which in
several cases misbehaves, see #24308 for details.
Ensure TF-M build uses same Python interpreter as Zephyr itself.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This change adds checks to validate consistency between Zephyr’s Kconfig
settings and cmsis configuration defined in SiP’s sdk provided headers.
This change also introduces a config to enable cmsis’ own checks which
emits warnings if a parameter relies on auto-populated default values.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Kconfig parameters, header’s default & silicon vendor’s SDK configuration
for CMSIS Core, must be consistent. Depending on the inclusion order of
the headers, this is currently not always the case.
This change introduces consistency checks & enusers defaults match their
Kconfig settings.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Switch BOARD_BL5340_DVK_CPUAPP_NS TF-M board selection from using the
platform support that is built-in to TF-M module, and instead use
the generic nRF5340 cpuapp platform support that all other nrf5340 SoC
related boards use.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The LPS28DFW is an ultracompact, piezoresistive, absolute pressure sensor.
Compared to the LPS22DF, the LPS28DFW is waterproof and has a Dual FS
capability and does not have SPI. This commit extends the LPS22DF driver to
be compatible with the LPS28DFW device.
Signed-off-by: Jonas Remmert <j.remmert@phytec.de>
Nanopb generates header files that need to be available before being
included. This isn't an issue for a target where the files were added
with zephyr_nanopb_sources. But if another target wants to include
these generated files we need a cmake dependency chain.
The nanopb_generated_headers custom target been added for this purpose.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This commit is a part of introduction of new WTD instances.
It adds new Kconfig symbols that can be used in WDT shim and
nrfx driver.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
This commit increases the length of ring buffer that holds serialized
nRF 802.15.4 API calls so that it can simultaneously store all
notifications the driver is capable of issuing. Currently that's not the
case, which creates a possibility of the serialization buffers running
out while the driver is issuing notifications.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Change makes EGU instance used for anomaly 109 workaround configurable.
The default EGU instance (5) may be used for other purpose.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Regular OpenThread upmerge to commit `75694d2`.
Move CONFIG_OPENTHREAD_PLATFORM_KEY_REFERENCES_ENABLE
from header file to Kconfig.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
The Nanopb cmake locates the protoc executable, verify the result
instead of doing it ourselves.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Despite what the TF-M documentation says about SFN model not supporting
Floating Point, it does support it, according to TF-M developers.
Remove SFN limitation not supported with FP Hard ABI.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add MCUBOOT_IMGTOOL_OVERWRITE_ONLY Kconfig option which
passes the --overwrite-only option to imgtool to avoid
adding the swap status area size when calculating overflow.
It is used by non-swap update modes.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
TF-M only suports floating point in IPC model, not the SFN model.
Since floating point is a basic feature of the architecture and TF-M
has the limitation it makes more sense for the dependency to exist in
TF-M and and limit the TF-M model choice instead of limiting the
option to enable floating point.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Changes the default of `LV_Z_VDB_SIZE` to 100 percent if
`LV_Z_FULL_REFRESH` is set. Reason is that LVGL will reset the full
refresh flag if the buffer is not equal to the screen size.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Fixes an issue whereby a rename of a variable type has been
forgotten in an instance, which now uses the correct type name
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Change the default TF-M model for small profile to match the
configuration set in the profile small configuration file.
Otherwise we would be overriding the profile default.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix include order between platform_ns and tfm_api_ns libraries.
platform_ns functions may depend on tfm_api_ns.
This would typically be platform specific IOCTL services added to the
platform_ns library requiring the tfm_platform_ioctl from the
TF-M platform partition exposed in tfm_platform_api.c
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Include the zephyr/dsp/types.h header for float32_t/float64_t type
definitions to avoid conflicts with other subsystems including this header.
Add compile-time asserts to ensure the typedefs meet the requirements of
the CANopenNode module.
Fixes: #63896
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Introduces a Kconfig symbol `LV_Z_LOG_LEVEL` because contrary to Zephyr the
numerical value of log levels in LVGL increases with severity. Also support
for the `LV_LOG_LEVEL_USER` is added.
Resolves issue #64351.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Changes in the macro statements that allows to build
with -Wudef flag enebaled, without errors.
Signed-off-by: Patryk Lipinski <patryk.lipinski@nordicsemi.no>
