Some configurations which are not valid for nrf54l15. Mainly those
which are using ENHANCED_POLL_OUT option which is not applicable for
nrf54l15 because it has ENDTX_STOPTX short so PPI connection is not
needed.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Modifying arbitrary delay to cover for receivers with timeout.
Adding a delay between polling and asynchronous checking to cover
for cases when CPU processing is fast enough so that both checks
may overlap.
Allow error code for uart_rx_disable call.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
PM action shall be called from the thread context thus switching to
k_work instead of the k_timer.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Board specific sample that only works with certain revisions of the
hardware requiring special BIOS settings.
Fixes#58057
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Applications need to run a scan to identify the security
mode before attempting the connection which adds to the time
taken for connection to be established.
To avoid the initial scan, support auto security mode which will
enable STA to choose between WPA, WPA2 and WPA3, based on the
network configuration.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
set_compiler_property does not accept a TARGET argument. Only set_property
does but they are easy to confuse. This patch fixes the wrong instances of
set_compiler_property that should have been set_property.
Signed-off-by: Nicolas Lebedenco <nicolas@lebedenco.net>
That call to enable_languages() is passed C CXX ASM which misleads the
reader into thinking that the three languages are enabled in that call but
at that point only ASM is actually because C and CXX were already
implicitly enabled by the call to project() above. The suggested change
removes the misleading C CXX arguments but we could as well make it clear
in the project() call by passing LANGUAGES C CXX.
Signed-off-by: Nicolas Lebedenco <nicolas@lebedenco.net>
In situations, where the address, the port and the auth token of the
hawkbit server are not known during build, it should be possible to set
it during runtime.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
This patch is to fix issue #71473.
The commit 0be0d2175b revert some change
introduced by hwmv2 which allows defconfig can be overlay, so revert
back defconfig to be full configure files which includes all items used
by the board variants.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
This commit adds test for the situation when all blocks
referenced from the top-level indirect block are removed.
Signed-off-by: Franciszek Pindel <fpindel@antmicro.com>
This commit fixes removing indirect blocks (marking them as 0)
in the inode structure. Previous version of the code was removing
the top-level blocks only when the first removed block was
one of the first 12 direct blocks. However, when the first removed
block is the first block in the referenced block list, its parent
(indirect block) should also be removed.
Signed-off-by: Franciszek Pindel <fpindel@antmicro.com>
This particular test was ignored in CI because, when using
platform_key, Twister picks the specific platform very early in
the process and it is possible that the chosen one is later
filtered out. To fix this, use the `integration_platforms` key
instead to specify the platforms where the test is expected to
complete successfully.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The latest commits allow llexts to be built on any architecture, even on
those where llext loading is still unsupported, which is very useful for
testing purposes. This means that the LOADER_BUILD_ONLY logic that was
added for this purpose in 1408d1e5b8 is no longer needed.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
When LLEXT_REMOVE_FLAGS is empty, the regular expression that is
constructed to remove flags from the Zephyr flags would match any
string, resulting in all flags being removed. This is not the intended
behavior, so we need to handle this case by setting the regular
expression to a pattern that does not match anything.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The partial linking option depends on the linker used in the build
process, and this flag is already defined by the Zephyr toolchains.
Use the $<TARGET_PROPERTY:linker,partial_linking> generator expression
to retrieve it instead of hardcoding the value for the GNU linker.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
FTM internal counter can be clocked by one of three clock sources
independent of the module bus clock. This patch introduces a DT property
to perform the clock selection from DT.
DT sources are updated to keep the current clock selection for all boards,
with exception of ucans32k1sic board which is migrated to use system
clock by default, as this seems to be a better choice for most cases.
Some PWM LED samples require slower clock so overlays are added for
those cases.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Set RTC clock source to the internal 32 KHz LPO. Currently RTC clock is
used to source RTC counter and FTM counter.
Fixes#71289
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
There is no reason to pass addrlen by pointer, since it is a read-only in
the context of sockaddr_to_nsos_mid().
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Move the cache size set calls from soc.c do common loader.c
for all related SOCs. Remove unnecessary includes.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Add the overlay for the esp-wrover-kit, to drive a character display
based on HD44780 chipset using the I2C bus gpio controller PCF8574.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Test defines a lopback between i2c driver master and nrfx TWIS slave
to verify their functional correctness.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Add Kconfig-to-nrfx symbol redefinitions so that TWIS instances
found on nRF54H20 and nRF54L15 devices are supported.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Add default configuration related to BLE protocol,
for Application and Radio core on nRF54h20 platform.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
GRTC peripheral is present on nRF54H20,
so the tests should be executed on this target as well.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Add support for half-duplex (3-wire) SPI operation using the Raspberry
Pi Pico PIO. To allow control of the size of the driver, including
half-duplex support is optional, under the control of Kconfig options.
The original PIO source code is also included as a reference.
Corrected 3-wire tx/rx counts.
Enable half-duplex code based on DTS configuration
Replace runtime checks with static BUILD_ASSERT()
Remove too-fussy Kconfig options
Removed PIO source per review request
Signed-off-by: Steve Boylan <stephen.boylan@beechwoods.com>
