Add three macros: sys_uint{16,32,64}_to_array, to convert
integers to byte arrays in a byte order aware manner.
For example, sys_uint16_to_array(0x0123) evaluates to:
{0x01, 0x23} for big endian machines, and {0x23, 0x01} for
little endian machines.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Add an ARCH_SUPPORTS_ROM_START kconfig symbol to mark architectures
that support ROM_START as an argument to zephyr_linker_sources.
This was added so that features relying on this feature could
depend on this kconfig symbol.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Support for BAP/BSRC and BAP/BSNK test cases.
Add partial support for GAP/PADV as periodic advertising is needed
for BAP/BSRC tests and they can share common code.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
The purpose of this test is to prove that the zephyr host can handle the
behavior described in the Bluetooth Core Specification Vol.3 Part.F
3.3.2 "Sequential protocol".
The host should be able to handle all of those in parallel: one
indication, one write request, multiple commands and multiple
notifications.
The "tester" part had to be written with a "tiny host" implementation
instead of the Zephyr host, as the ZH conflates GATT client and server
and doesn't allow a device to enqueue an ATT request + an ATT indication
on the same bearer.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
If the peer is a zephyr host, there is no problem, as the Zephyr
host limits sending parallel REQs and INDs.
But the spec allows sending those in parallel, and it may end up that
the re-used REQ buffer hasn't been destroyed when an indication comes.
Only re-use the buffer when enqueuing ATT responses.
This means that we may run out of buffers if the peer sends too many
indications and our application also sends a lot of commands/notifications.
The rationale for this is that having to handle a lot of requests is a
more plausible scenario (e.g. being discovered by multiple peers) than
handling lots of parallel indications.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Fix ULL_HIGH ticker operations count, it is discovered in
new BabbleSim test implementations that mesh tests using
Extended Advertising and Scanning enqueue upto 4 ticker
operations before ULL_LOW ticker_job could process it.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add Models Metadata Page 128 support to tester.
Signed-off-by: Michal Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This allows to advertise beacons with Private Node Identity on demand,
like was available for regular Node Identity.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
- Add entry for client and server in composition data.
- Add Client commands to aggregate and send messages.
MESH/SR/AGG/BV-02-C requires more key slots.
Signed-off-by: Michal Narajowski <michal.narajowski@codecoup.pl>
Adding support for automatic testing BLOB, DFU and DFD models.
Co-authored-by: Agata Ponitka <agata.ponitka@codecoup.pl>
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This enables Remote Provisioning in tester application. Adds basic
setup and required structures/functions.
add BTP API for Remote Provisioning Client
This adds BTP commands for RPR Client API.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
- Adds Large Comp Data Server and Client
- Defines some dummy metadata for Health Server
Signed-off-by: Michal Narajowski <michal.narajowski@codecoup.pl>
Some test cases require more control over transmission parameters used
when sending access messages.
Signed-off-by: Michal Narajowski <michal.narajowski@codecoup.pl>
Removed the tests for invalid bt_bap_broadcast_source_reconfigure
parameters and state, as those tests now implemented as unit tests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a simple central and peripheral CIS test that
exercises the ISO host API for unicast ISO (CIS).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
bt_iso_cig_reconfigure would almost always fail due to invalid
checks that did not take the functioner properly into account.
The CIS provided to bt_iso_cig_reconfigure can now be allocated
beforehand, if the CIG for the CIS is the same as the one being
reconfigured.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This sample is an alternative implementation of hci_uart. The new sample
differs from the existing sample in that it uses the async UART API
instead of the interrupt driven API.
Included in this commit is a new test for HCI UART flow control. It's
enabled for hci_uart_async. The test can excercise also the existing
hci_uart sample (with some minimal changes to allow compiling in the
mock controller and test suite). The existing hci_uart sample currently
fails the flow control test.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
This allows testing code that uses the UART interrupt-driven API and
UART asynchronous API.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
The CONFIG_NET_L2_WIFI_SHELL isn't always enabled.
But these functions might still be used, so need to
move functions into mgmt.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
If an IPv4 address is requested on an IPv6 interface or vice versa
use a sane default fallback address to send the response.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Adjust model names and compats for Intel alder-lake boards. Names are now
consistent with names used in other Intel boards.
Signed-off-by: Franciszek Zdobylak <fzdobylak@antmicro.com>
Rename filename of binding for quicklogic,usbserialport-s3b to make it
consistent with compatible string.
Signed-off-by: Franciszek Zdobylak <fzdobylak@antmicro.com>
Update compatible strings and file names of Intel CPUs. Always use dash
instead of underscore. This will make all the compat strings and binding
files names for Intel consistent.
Signed-off-by: Franciszek Zdobylak <fzdobylak@antmicro.com>
Zephyr increments the gain until it reaches the maximum value and
then sets the registers to zero which is incorrect.
The values set in the DMIC config should be restored.
Signed-off-by: Fabiola Kwasowiec <fabiola.kwasowiec@intel.com>
The zperf shell sends a IPv6 ping at the start when working
with IPv6. Convert the sending of the ping to use the new API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add suitable functions that offloaded network device driver
can receive ICMP Echo-Request (ping) requests and give
ICMP responses back when it receives them from the network.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
