If appropriate configuration is enabled, assume (with the default
configuration) that the proxy server uses the same address as the broker
and the default 1080 port.
The default settings can be changed in the configuration header.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This was never a long-term solution, more of a gross hack
to get test cases working until we could figure out a good
end-to-end solution for memory domains that generated
appropriate linker sections. Now that we have this with
the app shared memory feature, and have converted all tests
to remove it, delete this feature.
To date all userspace APIs have been tagged as 'experimental'
which sidesteps deprecation policies.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
CONFIG_APPLICATION_MEMORY was a stopgap feature that is
being removed from the kernel. Convert tests and samples
to use the application shared memory feature instead,
in most cases using the domain set up by ztest.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
IPv4 is not needed for packet socket sample. Previous commit
helps to remove dependencies.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Use the new i2c_write_read() wrapper to simplify the code.
Also add several overlays used to test the sensor on a variety of
boards, and conf file support for trigger testing.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Adds board configurations to support the mimxrt1050_evk and
mimxrt1060_evk boards in the lvgl sample.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fixes the lvgl sample to use the same display device name as the lvgl
library rather than a hardcoded string.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
With this commit, it is now possible that if (for e.g.) lightness
transition is interrupted by temperature transition (which could
be instantaneous or non-instanstaneous) then as soon as temperature
transition get over, then algorithm would achieve target value
of lightness.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Add a sample demonstrating usage of the APA102 driver, heavily based
on led_ws2812. Tested on nucleo_l432kc with an Adafruit DotStar strip.
Signed-off-by: Marc Pignat <marc@absintheaudio.com>
There is a apa102 driver, and an upcomming patch will provide a sample
for using it, but let's keep the bitbang version which is intersting.
Signed-off-by: Marc Pignat <marc@absintheaudio.com>
Sample application which opens a packet socket and receives
every packet on the wire and send some dummy packet over
socket. Simple demo of how to use packet sockets.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Added sample to show disk access and FS api with
Fat filesystem and SDHC driver. Tested working with
nrf52840 (blip).
Signed-off-by: Tavish Naruka <docuser@docs.electronut.in>
This commit enhances the power_mgr sample by adding code
presenting power state locking API as well as its effect
on the decisions made by the Power Management Policy.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Indicate that PWM is supported on several Nordic DK boards so that
the pwm_nrf5_sw and pwm_nrfx drivers are covered by CI builds.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Enable HW PWM driver instead of the SW one on nRF SoCs where the PWM
peripheral is present.
Default PWM instances are also enabled on Nordic DK boards so that it
is possible to build the basic fade_led sample for them without extra
adjustments.
After the above changes are applied, some configuration alterations
in basic samples blink_led and fade_led become no longer needed.
These are removed. And the blink_led sample is corrected so that it
works with the nRF HW PWM driver as well.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
To avoid confusion, callbacks using ordinal pin numbers
is going to be reverted. So the driver has to be re-worked
to expose multiple devices so each device has 32 pins.
Also fixes#12765
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add section for build sanity check configuration with
CONFIG_USB_COMPOSITE_DEVICE enabled.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add configuration for creating composite USB device with CDC ACM and
Mass Storage functions.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
New shell does not need either CONFIG_UART_CONSOLE
or interrupts support to be working. Only CONFIG_SERIAL
in combination with CONFIG_UART_SHELL_ON_DEV_NAME are required.
Updated sample yaml file accordingly.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
As we are removing net_app and net_pkt based libraries and
applications, CoAP legacy based libraries and apps are moved
to socket based implementations. So removing legacy CoAP.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This commit fixes the following issues introduced when switching to
the new SPI API in commit e7de85b534:
- the SPI slave operating mode (and support for it) was not properly
selected (the setting was missing in the sample probably because
the old nRF SPI slave driver used in this sample was not checking
the requested mode at all)
- the `txmsg` buffer filled with 0xFF values in the `bt_tx_thread`
function was improperly used afterwards in `spi_send` to transmit
the slave header frame
- the common structures defining buffers for SPI transactions (`tx`
and `rx`) were modified in `spi_send` before the corresponding
semaphore was taken, resulting in data corruption
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Convert the hci_spi sample to get the SPI and GPIO settings from Device
Tree instead of Kconfig.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The sample was defining a #define with a CONFIG_ prefix but this wasn't
coming from Kconfig. Change the define name not to conflict with the
Kconfig CONFIG_ namespace.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As we want to remove dts dependency on Kconfig, we had a case based on
CONFIG_BOOTLOADER_MCUBOOT. From a DTS point of view that was just
getting the chosen property 'zephyr,code-partition' set. We can easily
move this to the actual dts files and remove the mcuboot.overlay.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
gpio_port_* functions are being deprecated. Convert boards/altera_max10
sample to use gpio_pin_* functions instead.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
If status is 0, both ip_hdr and proto_hdr will own a pointer to the
relevant IP and Protocol headers. In order to know which of ipv4/ipv6
and udp/tcp one will need to use respectively net_pkt_family(pkt) and
net_context_get_ip_proto(context).
Having access to those headers directly, many callbacks will not need
to parse the packet again no get the src/dst addresses or the src/dst
ports. This will be change after this commit.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use auto-generated device tree macros in LPS25HB driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LSM6DS0 driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
As example of echo_async_select added recently shows, we no longer
need to define a logger unconditionally in each source file. These
samples are intended to show Zephyr compatibility with POSIX sockets
API, so the less there're differences between Zephyr vs POSIX
ifdefs, the better.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The LwM2M library has moved from the network application library
APIs to BSD socket APIs. Let's make the needed changes in the
LwM2M sample to follow those changes.
Signed-off-by: Michael Scott <mike@foundries.io>
Now that the security data can be loaded into and used from the
security / server objects, we can add support for LwM2M bootstrap.
This is a mode where initially a connection can be made to a server
which can update several LwM2M (including security and server
data) and then trigger a "bootstrap complete". Once this happens
the client will start it's connection process over but now with
the new information.
Signed-off-by: Michael Scott <mike@foundries.io>
In order to support bootstrap mode, we need to store server data
in the security / server objects. Once the connection to the
bootstrap server is made, it will clear these objects and add
new server connection data.
Signed-off-by: Michael Scott <mike@foundries.io>
As part of the migration from net_app APIs to socket APIs, let's
stop referencing the net_pkt fragments throughout the LwM2M library.
Establish a msg_data flat buffer inside lwm2m_message and use that
instead.
NOTE: As a part of this change we remove the COAP_NET_PKT setting.
The COAP library reverts to COAP_SOCK behavior.
This doesn't mean we use sockets in LwM2M (yet), it only means we
use the socket-compatible COAP library which parses flat buffers
instead of net_pkt fragments.
Signed-off-by: Michael Scott <mike@foundries.io>
Currently, this will select the needed configs for LwM2M and net_pkt.
During the migration to socket APIs, the net_pkt selections will change
to socket-based selects.
Signed-off-by: Michael Scott <mike@foundries.io>
As the net-app based echo samples are being removed, there's no use
referencing them any longer in their socket counterparts.
Additionally, overlay configuration descriptions were added in the
same manner original samples did.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The removed test does the same thing and runs on the same platforms
as already existing samples/boards/nrf52/power_mgr.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit updates the README and sample.yaml in order to signal
that this demo works flawlessly on the nRF51 platform.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit updates the power management sample in order to use
new features introduced by recent changes in the Zehyr Power
Management subsystem. Now, it shows how to use power management
policies as well as how to implement custom power modes.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Since the lp3943 led driver still supports both DTS and non-DTS
configuration, we update the code to use DT_<COMPAT>_<INSTANCE>
defines for the CONFIG_HAS_DTS_I2C case.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since the pca9633 led driver still supports both DTS and non-DTS
configuration, we update the code to use DT_<COMPAT>_<INSTANCE>
defines for the CONFIG_HAS_DTS_I2C case.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since the lp5562 led driver still supports both DTS and non-DTS
configuration, we update the code to use DT_<COMPAT>_<INSTANCE>
defines for the CONFIG_HAS_DTS_I2C case.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds support in the sample to deal with the case when TLS
is offloaded and mbedtls is not necessary.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
This commit adds the necessary changes to allow the mqtt_publisher
sample to run on cc3220sf_launchxl.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The original SNTP client library was designed for the net-app API, for
which it makes sense to have a callback function, which is called
asynchronously when an answer is received.
For the socket based interface, the callback is called just before
sntp_request() returns. It gets the status and the epoch_time in
parameter, however the status is already returned by sntp_request(). It
therefore make sense to replace the callback function by a pointer to
epoch_time.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There are no longer per-partition initialization functions.
Instead, we iterate over all of them at boot to set up the
derived k_mem_partitions properly.
Some ARC-specific hacks that should never have been applied
have been removed from the userspace test.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Don't include net_app.h and net_buf.h, the first is deprecated, the
latter is low-level header, both shouldn't be used for socket apps.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Fixes the adt7420 sensor sample to fail gracefully if the sensor device
is not found and asserts are not enabled.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The public APIs for application shared memory are now
properly documented and conform to zephyr naming
conventions.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The v2018.10 release of OpenAMP reworks the API set and splits the
remoteproc vs rpmsg interfaces so one can use rpmsg without remoteproc.
This helps drastically reduce the code footprint utilized by OpenAMP.
The remote see around 4k reduction in code size.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If Client send transition time values as 0x40 or 0x80 or 0xC0 then
this was cause the behind divide by zero exception during calculation
of transition->counter. This PR will solve this bug.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Removed foreground command functionality from shell source files.
Removed associated example.
Removed enter/exit command functions from the Bluetooth example
Updated project config files.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The WNC-M14A2A modem is supposed to use HW flow control on the UART
connected to the MCU. In the past, we were able to bypass this
requirement by using only the LTE-M firmware which supported pulling
the CTS line high via "send-ok" gpio.
This does NOT work for the LTE firmware.
Now that MCUX UART driver supports hw-flow-control setting, let's use
it in the modem overlay so that regardless of modem firmware
(LTE vs. LTE-M) the sample will "just work".
Signed-off-by: Michael Scott <mike@foundries.io>
CONFIG_NET_CONTEXT_NET_PKT_POOL is used by Zephyr's TCP stack as
a way of keeping the original packet data when compression and
other l2 specific actions make the data unusable for retries.
LwM2M uses UDP and this option was never used.
Signed-off-by: Michael Scott <mike@foundries.io>
Convert ssd1306 display driver to use new defines so we can remove
the dts_fixup.h code for it. Also dropped "-i2c" from compatible.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert ssd1673 display driver to use new defines so we can remove
the dts_fixup.h code for it. Also dropped "-spi" from compatible.
Fix up references in reel_board dts and sample.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The app shared memory macros for declaring domains provide
no value, despite the stated intentions.
Just declare memory domains using the standard APIs for it.
To support this, symbols declared for app shared memory
partitions now are struct k_mem_partition, which can be
passed to the k_mem_domain APIs as normal, instead of the
app_region structs which are of no interest to the end
user.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Convert the lpd880x driver to use device tree and new DT_<COMPAT>
defines. Support both LPD8803 & LPD8806 device tree compats.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
SNTP client sample requests time sync on IPv4 and IPv6 addresses
using socket based SNTP client library.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
As networking libraries and protocols are moving to socket
based implementation, reworked SNTP client library to use sockets.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
We have now two code samples available for ArgonKey board:
1. sensors sample, fetching data from accel/gyro/mag,
barometer, humidity and proximity sensors
2. microphone sample, acquiring 5s audio @16KHz from the
on-board microphone.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LIS3MDL driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LIS2MDL driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LSM6DSL driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The app is already sending period heart beat messages, and since it is
not designed to be used for such long times that would require IVI
Update, keep the secure network beacon sending disabled.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Suspend the mesh network after 30 minutes of inactivity. This should
help prolong the battery life of boards used at multi-day events, if
the user forgets to power off the device for the night.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Docs in the samples folder are a mixture of samples and sample indexes
of more samples, cluttering the index display. This change eliminates
the clutter, be we should reorganize the sample docs so we have a
consistent doc hierarchy (and improved organization).
Fixes: #12758
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add a project configuration for nrf52840_pca10090 that will
route the nRF9160 interface pins to the nRF52840, and use them
for HCI over UART.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
The old legacy APIs use net-app library and as that is being
removed, then the dependencies need to be removed also.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This sample is made to demonstrate use of x-nucleo-ik01a2 shield.
It requires a board with Arduino i2c where it can be plugged on.
The sample has been tested on Nucleo F401RE board.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Share lis2dh driver among few accelerometer sensors that has
same register interface: LIS2DH, LIS3DH, LSM303DLHC, LIS2DH12,
LSM303AGR.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Supported PWM at pins A0, D3, D5 and D6 which are also Arduino
compatible. Also the onboard red LED can be used with PWM.
The basic/{fade_led, blink_led} samples to apply to this board
seemlessly and operate on the onboard red LED.
Also supported RTC.
Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
This commit provides sample application for sensor lsm6dsl.
This sample has been tested on both 96b_argonkey board,
where lsm6dsl is connect to the micro thru SPI bus, and on
disco_l475_iot1 board, where instead it is connected to I2C bus.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
mbedTLS benchmark used 32-bit arithmetics for time calculations
(nanosecond resolution), which could overflow on slower platforms
on more time-consuming benchmark tests. In result, the benchmark
could give incorrect timing information. Using 64-bit arithmetics
prevents this issue.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add overlays for commonly used socket samples: big_http_download and
dumb_http_server. Can be used with:
make BOARD=mps2_an385 CONF_FILE="prj.conf overlay-smsc911x.conf"
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Split out the boards that utilize the FRDM-KW41Z as a seperate test
where we explicitly set the shield as an extra_args instead of having to
do it in the CMakeLists.txt file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rather than specifying SHIELD via Kconfig, we move it to being
specified via the command line, similar to board.
So we can do:
-DSHIELD=x_nucleo_iks01a1
or, for multiple shields:
-DSHIELD="x_nucleo_iks01a1 frdm_kw41z"
Following cmake change, update x_nucleo_iks01a1 sample in order
not to enable CONFIG option anymore but set SHIELD cmake option.
Last, update documentation to reflect this change.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a configuration structure to sht3xd that holds instance-specific
parameters, implemented in a immutable statically allocated object
initialized with material from device tree binding aliases.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
We have a new power management system and those samples have been
written for specific boards and using the application based power
management subsystem. We are getting new tests/samples that are generic
with the new subsystem, so remove those in favor of the new ones.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample is linking the 'app' with 'subsys__bluetooth', which will
add zephyr/subsys/bluetooth to the include path of the app. But this
is unnecessary as the app already has this path on it's include path.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Legacy shell removed in order to avoid maintaining two shells
systems.
All examples and tests have been migrated to the new shell.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Convert lsm303dlhc_accel & lsm303dlhc_magn sensor driver to use new
defines so we can remove the dts_fixup.h code for it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Driver for networking device Microchip ENC28J60 is used as SPI slave,
moved to DTS type definition. Samples echo_client and echo_server use
this device on Arduino 101 board.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update boards yaml file with arduino_i2c supported option
We exclude disco_l475_iot1 from the x_nucleo_iks01a1 sample since there
are duplicated sensors between the disco_l475_iot1 and shield. Until
Zephyr drivers can handle multiple sensors we need to have this exclude.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This board has headers for these buses so they should be made available
without requiring special overlays.
Also take advantage of the new Nordic auto-enable for peripherals,
which eliminates the need for special configuration.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
If Server receives re-transmitted message then it will not
transmit corresponding publish message for it.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Added app_gpio.c & no_transition_work_handler.c to reduce
burden on main.c. It will simplify & help to understand
overall architecture.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Simplified algorithm behind states binding & target values calculation.
This has improved code readability.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
