Use auto-generated device tree macros in LSM6DS0 driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
As example of echo_async_select added recently shows, we no longer
need to define a logger unconditionally in each source file. These
samples are intended to show Zephyr compatibility with POSIX sockets
API, so the less there're differences between Zephyr vs POSIX
ifdefs, the better.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The LwM2M library has moved from the network application library
APIs to BSD socket APIs. Let's make the needed changes in the
LwM2M sample to follow those changes.
Signed-off-by: Michael Scott <mike@foundries.io>
Now that the security data can be loaded into and used from the
security / server objects, we can add support for LwM2M bootstrap.
This is a mode where initially a connection can be made to a server
which can update several LwM2M (including security and server
data) and then trigger a "bootstrap complete". Once this happens
the client will start it's connection process over but now with
the new information.
Signed-off-by: Michael Scott <mike@foundries.io>
In order to support bootstrap mode, we need to store server data
in the security / server objects. Once the connection to the
bootstrap server is made, it will clear these objects and add
new server connection data.
Signed-off-by: Michael Scott <mike@foundries.io>
As part of the migration from net_app APIs to socket APIs, let's
stop referencing the net_pkt fragments throughout the LwM2M library.
Establish a msg_data flat buffer inside lwm2m_message and use that
instead.
NOTE: As a part of this change we remove the COAP_NET_PKT setting.
The COAP library reverts to COAP_SOCK behavior.
This doesn't mean we use sockets in LwM2M (yet), it only means we
use the socket-compatible COAP library which parses flat buffers
instead of net_pkt fragments.
Signed-off-by: Michael Scott <mike@foundries.io>
Currently, this will select the needed configs for LwM2M and net_pkt.
During the migration to socket APIs, the net_pkt selections will change
to socket-based selects.
Signed-off-by: Michael Scott <mike@foundries.io>
As the net-app based echo samples are being removed, there's no use
referencing them any longer in their socket counterparts.
Additionally, overlay configuration descriptions were added in the
same manner original samples did.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The removed test does the same thing and runs on the same platforms
as already existing samples/boards/nrf52/power_mgr.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit updates the README and sample.yaml in order to signal
that this demo works flawlessly on the nRF51 platform.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit updates the power management sample in order to use
new features introduced by recent changes in the Zehyr Power
Management subsystem. Now, it shows how to use power management
policies as well as how to implement custom power modes.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Since the lp3943 led driver still supports both DTS and non-DTS
configuration, we update the code to use DT_<COMPAT>_<INSTANCE>
defines for the CONFIG_HAS_DTS_I2C case.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since the pca9633 led driver still supports both DTS and non-DTS
configuration, we update the code to use DT_<COMPAT>_<INSTANCE>
defines for the CONFIG_HAS_DTS_I2C case.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since the lp5562 led driver still supports both DTS and non-DTS
configuration, we update the code to use DT_<COMPAT>_<INSTANCE>
defines for the CONFIG_HAS_DTS_I2C case.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds support in the sample to deal with the case when TLS
is offloaded and mbedtls is not necessary.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
This commit adds the necessary changes to allow the mqtt_publisher
sample to run on cc3220sf_launchxl.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The original SNTP client library was designed for the net-app API, for
which it makes sense to have a callback function, which is called
asynchronously when an answer is received.
For the socket based interface, the callback is called just before
sntp_request() returns. It gets the status and the epoch_time in
parameter, however the status is already returned by sntp_request(). It
therefore make sense to replace the callback function by a pointer to
epoch_time.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There are no longer per-partition initialization functions.
Instead, we iterate over all of them at boot to set up the
derived k_mem_partitions properly.
Some ARC-specific hacks that should never have been applied
have been removed from the userspace test.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Don't include net_app.h and net_buf.h, the first is deprecated, the
latter is low-level header, both shouldn't be used for socket apps.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Fixes the adt7420 sensor sample to fail gracefully if the sensor device
is not found and asserts are not enabled.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The public APIs for application shared memory are now
properly documented and conform to zephyr naming
conventions.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The v2018.10 release of OpenAMP reworks the API set and splits the
remoteproc vs rpmsg interfaces so one can use rpmsg without remoteproc.
This helps drastically reduce the code footprint utilized by OpenAMP.
The remote see around 4k reduction in code size.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If Client send transition time values as 0x40 or 0x80 or 0xC0 then
this was cause the behind divide by zero exception during calculation
of transition->counter. This PR will solve this bug.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Removed foreground command functionality from shell source files.
Removed associated example.
Removed enter/exit command functions from the Bluetooth example
Updated project config files.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The WNC-M14A2A modem is supposed to use HW flow control on the UART
connected to the MCU. In the past, we were able to bypass this
requirement by using only the LTE-M firmware which supported pulling
the CTS line high via "send-ok" gpio.
This does NOT work for the LTE firmware.
Now that MCUX UART driver supports hw-flow-control setting, let's use
it in the modem overlay so that regardless of modem firmware
(LTE vs. LTE-M) the sample will "just work".
Signed-off-by: Michael Scott <mike@foundries.io>
CONFIG_NET_CONTEXT_NET_PKT_POOL is used by Zephyr's TCP stack as
a way of keeping the original packet data when compression and
other l2 specific actions make the data unusable for retries.
LwM2M uses UDP and this option was never used.
Signed-off-by: Michael Scott <mike@foundries.io>
Convert ssd1306 display driver to use new defines so we can remove
the dts_fixup.h code for it. Also dropped "-i2c" from compatible.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert ssd1673 display driver to use new defines so we can remove
the dts_fixup.h code for it. Also dropped "-spi" from compatible.
Fix up references in reel_board dts and sample.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The app shared memory macros for declaring domains provide
no value, despite the stated intentions.
Just declare memory domains using the standard APIs for it.
To support this, symbols declared for app shared memory
partitions now are struct k_mem_partition, which can be
passed to the k_mem_domain APIs as normal, instead of the
app_region structs which are of no interest to the end
user.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Convert the lpd880x driver to use device tree and new DT_<COMPAT>
defines. Support both LPD8803 & LPD8806 device tree compats.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
SNTP client sample requests time sync on IPv4 and IPv6 addresses
using socket based SNTP client library.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
As networking libraries and protocols are moving to socket
based implementation, reworked SNTP client library to use sockets.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
We have now two code samples available for ArgonKey board:
1. sensors sample, fetching data from accel/gyro/mag,
barometer, humidity and proximity sensors
2. microphone sample, acquiring 5s audio @16KHz from the
on-board microphone.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LIS3MDL driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LIS2MDL driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LSM6DSL driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The app is already sending period heart beat messages, and since it is
not designed to be used for such long times that would require IVI
Update, keep the secure network beacon sending disabled.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Suspend the mesh network after 30 minutes of inactivity. This should
help prolong the battery life of boards used at multi-day events, if
the user forgets to power off the device for the night.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Docs in the samples folder are a mixture of samples and sample indexes
of more samples, cluttering the index display. This change eliminates
the clutter, be we should reorganize the sample docs so we have a
consistent doc hierarchy (and improved organization).
Fixes: #12758
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add a project configuration for nrf52840_pca10090 that will
route the nRF9160 interface pins to the nRF52840, and use them
for HCI over UART.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
The old legacy APIs use net-app library and as that is being
removed, then the dependencies need to be removed also.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This sample is made to demonstrate use of x-nucleo-ik01a2 shield.
It requires a board with Arduino i2c where it can be plugged on.
The sample has been tested on Nucleo F401RE board.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Share lis2dh driver among few accelerometer sensors that has
same register interface: LIS2DH, LIS3DH, LSM303DLHC, LIS2DH12,
LSM303AGR.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Supported PWM at pins A0, D3, D5 and D6 which are also Arduino
compatible. Also the onboard red LED can be used with PWM.
The basic/{fade_led, blink_led} samples to apply to this board
seemlessly and operate on the onboard red LED.
Also supported RTC.
Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
This commit provides sample application for sensor lsm6dsl.
This sample has been tested on both 96b_argonkey board,
where lsm6dsl is connect to the micro thru SPI bus, and on
disco_l475_iot1 board, where instead it is connected to I2C bus.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
mbedTLS benchmark used 32-bit arithmetics for time calculations
(nanosecond resolution), which could overflow on slower platforms
on more time-consuming benchmark tests. In result, the benchmark
could give incorrect timing information. Using 64-bit arithmetics
prevents this issue.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add overlays for commonly used socket samples: big_http_download and
dumb_http_server. Can be used with:
make BOARD=mps2_an385 CONF_FILE="prj.conf overlay-smsc911x.conf"
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Split out the boards that utilize the FRDM-KW41Z as a seperate test
where we explicitly set the shield as an extra_args instead of having to
do it in the CMakeLists.txt file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rather than specifying SHIELD via Kconfig, we move it to being
specified via the command line, similar to board.
So we can do:
-DSHIELD=x_nucleo_iks01a1
or, for multiple shields:
-DSHIELD="x_nucleo_iks01a1 frdm_kw41z"
Following cmake change, update x_nucleo_iks01a1 sample in order
not to enable CONFIG option anymore but set SHIELD cmake option.
Last, update documentation to reflect this change.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a configuration structure to sht3xd that holds instance-specific
parameters, implemented in a immutable statically allocated object
initialized with material from device tree binding aliases.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
We have a new power management system and those samples have been
written for specific boards and using the application based power
management subsystem. We are getting new tests/samples that are generic
with the new subsystem, so remove those in favor of the new ones.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample is linking the 'app' with 'subsys__bluetooth', which will
add zephyr/subsys/bluetooth to the include path of the app. But this
is unnecessary as the app already has this path on it's include path.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Legacy shell removed in order to avoid maintaining two shells
systems.
All examples and tests have been migrated to the new shell.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Convert lsm303dlhc_accel & lsm303dlhc_magn sensor driver to use new
defines so we can remove the dts_fixup.h code for it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Driver for networking device Microchip ENC28J60 is used as SPI slave,
moved to DTS type definition. Samples echo_client and echo_server use
this device on Arduino 101 board.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update boards yaml file with arduino_i2c supported option
We exclude disco_l475_iot1 from the x_nucleo_iks01a1 sample since there
are duplicated sensors between the disco_l475_iot1 and shield. Until
Zephyr drivers can handle multiple sensors we need to have this exclude.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This board has headers for these buses so they should be made available
without requiring special overlays.
Also take advantage of the new Nordic auto-enable for peripherals,
which eliminates the need for special configuration.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
If Server receives re-transmitted message then it will not
transmit corresponding publish message for it.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Added app_gpio.c & no_transition_work_handler.c to reduce
burden on main.c. It will simplify & help to understand
overall architecture.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Simplified algorithm behind states binding & target values calculation.
This has improved code readability.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Disabled the CONFIG_COVERAGE for benchmarks and other tests.
This is needed because it interferes with normal behavior of the
test case.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Previously there was just "min_ram: 32", which took care about
suitable flash size implicitly. But now we have interesting boards
(e.g. lpcxpresso54114_m0) which tout RAM of 32K and Flash of 64K.
So, become more explicit about Flash requirement for the sample.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
These two tests are hitting a stack overflow on x86_64 (not entirely
surprisingly), but can't just increase stack size because there is an
assert in the CMSIS compatibility layer that stacks be under 512
bytes. Just disable for now.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This builds with a host compiler, not one from the SDK, and so no
newlib library is available. There is work to enable newlib detection
at and above the cmake level. This patch can be reverted when that
lands.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
No MPU support there yet. This test should really be predicated on a
kconfig variable, not architecture.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This patch adds a x86_64 architecture and qemu_x86_64 board to Zephyr.
Only the basic architecture support needed to run 64 bit code is
added; no drivers are added, though a low-level console exists and is
wired to printk().
The support is built on top of a "X86 underkernel" layer, which can be
built in isolation as a unit test on a Linux host.
Limitations:
+ Right now the SDK lacks an x86_64 toolchain. The build will fall
back to a host toolchain if it finds no cross compiler defined,
which is tested to work on gcc 8.2.1 right now.
+ No x87/SSE/AVX usage is allowed. This is a stronger limitation than
other architectures where the instructions work from one thread even
if the context switch code doesn't support it. We are passing
-no-sse to prevent gcc from automatically generating SSE
instructions for non-floating-point purposes, which has the side
effect of changing the ABI. Future work to handle the FPU registers
will need to be combined with an "application" ABI distinct from the
kernel one (or just to require USERSPACE).
+ Paging is enabled (it has to be in long mode), but is a 1:1 mapping
of all memory. No MMU/USERSPACE support yet.
+ We are building with -mno-red-zone for stack size reasons, but this
is a valuable optimization. Enabling it requires automatic stack
switching, which requires a TSS, which means it has to happen after
MMU support.
+ The OS runs in 64 bit mode, but for compatibility reasons is
compiled to the 32 bit "X32" ABI. So while the full 64 bit
registers and instruction set are available, C pointers are 32 bits
long and Zephyr is constrained to run in the bottom 4G of memory.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add Accelerometer mouse by using fxos8700 accelerometer and using data
to control USB HID mouse.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
When used suitable config overlay, qemu_cortex_m3 with Ethernet
support can be started with just usual "make run".
An example of such overlay is included with samples/net/echo_server,
can be built and run with:
make BOARD=qemu_cortex_m3 \
CONF_FILE="prj.conf overlay-qemu_cortex_m3_eth.conf" run
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Added macro that generates simple report descriptor for mouse.
This improves the readability of hid-mouse sample.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
These were still running through Ethernet using generic
overlay-802154.conf thus creating a dedicated one.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Set BOARD variable in CMakeLists.txt for DMIC Sample App
Since this sample app is for intel_s1000_crb, setting BOARD
in CMakeLists.txt will eliminate the need to specify in
cmake command line every time during build.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Check should be done with & instead of | otherwise it will always be
evaluated as 1/true regardless of the flags.
Fixes#12308
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The current OpenThread integration wants to download (from github) and
configure the OpenThread source tree every time the app is build. We
don't want to be doing this in quadruplicate every time sanitycheck is
run.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These tests were defining a "test_kw41z" case, but that platform is
already whitelisted in the main ("test") case, and this one defines no
different behavior. It's just a dupe.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
With the new implementation we do not need a NULL terminated list
of kobjects. Therefore the list will only contain valid entries
of kobjects.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
nucleo_l476rg uses I2C_3 rather than I2C_0, and uses special magic to
synthesize a corresponding define from a device tree node label. Update
the sample to use the Arduino binding if that's present.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The Nordic TWIM driver uses DMA which requires that the source address
be located in RAM. If it isn't the transfer will rejected as invalid.
Provide a RAM address even though it's never dereferenced.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
0x77 is an available device address (and is the secondary address for
the BME280). 0x78 is a reserved address.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Exteneded shell sample with example how to use shell_fprintf from
any context with 'foreground' command.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The test 'samples/application_development/code_relocation' was failing
in master because it was not declaring that it was defining additional
sections.
The CI error is attached below.
This patch fixes the CI failure by declaring in 'sample.yaml' that
these additional sections are expected.
FAILED:
qemu_cortex_m3/samples/application_development/code_relocation/test
has unrecognized binary sections: ['_SRAM2_RODATA_SECTION_NAME',
'_SRAM_TEXT_SECTION_NAME', '_SRAM_RODATA_SECTION_NAME',
'_SRAM_DATA_SECTION_NAME', '_CUSTOM_SECTION_NAME2']
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Fix misspellings in documentation (.rst, Kconfig help text, and .h
doxygen API comments), missed during regular reviews.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
blinky/button and disco samples are now using definitions
generated from boards dts files.
Update samples README files accordingly.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The options selecting nRF drivers are now enabled by default when
an nRF SoC is selected as the build target.
The options selecting given hardware instances are now enabled at
the board level.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The sample application to demonstrate dining philosopher's problem
implementation using CMSIS RTOS V2 APIs with semaphores and mutexes
as resources (forks).
The application makes use of CMSIS_RTOS_V2 APIs on threads, semaphores
and mutexes.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
Increase rx stack size for OpenThread overlay, as updated revision of
OpenThread requires more stack to operate.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
After this fix each LED will blink 5 times. Previously
LED_0 has been blining 6 times while others 5 times.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Update zephyr integration of openthread to latest api as of 2018-12-17:
2a75d30684
Both echo_server and echo_client compile and are operational.
Signed-off-by: Martin Turon <mturon@google.com>
This application benchmarks the various cryptographic primitives
offered by mbed TLS.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
It is safe to assume that if X_GPIO_CONTROLLER is defined (hence
generated) X_GPIO_PIN should also be defined.
If this is not the case, this is an issue and letting the sample
build will reveal the issue.
Update the yaml filter to rely only on _GPIO_CONTROLLER #define's
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In disco basic sample, same GPIO controller was used for LED0
and LED1, which is actually a particular case.
This change implements the general case, where LED0 an LED1 might
not have the same gpio controller.
Tested on nucleo_f429zi and frdm_k64f.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In gpio driver sample, same GPIO controller was used for out pin
(LED0) and in pin (SW0), which is actually a particular case.
This change implements the general case, where button an led might
not have the same gpio controller.
Tested on nucleo_f429zi and frdm_k64f.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Removed get_report_cb as it was an incorrect implementation
of Get_Report request. Correct response would be returning
current report value, not report descriptor.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Currently there is a mixed approach in prefixes from mbedTLS
configuration (MBEDTLS_ and TLS_). The latter was used in generic config
file and could bring up confusion that it can only be used with TLS
subsystem. Hence unify the approach to MBEDTLS_ prefix to avoid such
confusion.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
STM32 uart Kconfig instance flags were not following
same naming scheme than other drivers (i2c, spi, ..)
Update driver to use UART_X instead of UART_STM32_PORT_X
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Added right button, X and Y axis movement to HID mouse example.
Enabled only if board has enough buttons.
Added LED toggling notification when report is sent.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Check result of fcntl() to catch any regressions in fcntl() handling
in Zephyr. To facilitate this, also merge block() and nonblock()
functions into single setblocking().
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Current application data size in echo_client sample does not fit into a
single datagram with DTLS enbled for default IPv6 MTU (1280 bytes). This
caused abrupt failure of the sample with DTLS enabled over 802.15.4 L2.
Decreasing the application data size allows it to fit into a single UDP
datagram after encapsulating it into DTLS record.
Additionally, finetune DTLS timeout on echo_server to match UDP
application timeout on echo_client (so that a single datagram loss
does not cauase DTLS session to end).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Now if Server receives re-transmitted messages from client then
it will not get completely ignored but respective GET & Publish
message will get release from Server side.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
As per Mesh Model Specification,
when a Server receives a Set message or a Set Unacknowledged message,
it shall set the state to the target field of the message,
unless the message has the same values for the SRC, DST, and TID
fields as the previous message received within the last 6 seconds.
This commit take care of this requirement.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
POSIX doesn't mandate such a header, only <fcntl.h>. <sys/fnctl.h>
is just an internal implementation detail of Newlib on which we should
not rely.
This makes it possible to build this sample against minimal libc.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Considering that IP can be set dynamically by DHCP
or statically before test previously, we could have
alternative way by supporting both setting IP and
existing IP.
Signed-off-by: Bub Wei <bub.wei@unisoc.com>
Since the Arduino 101 and the Quark SE C1000 are not actively developed
boards, default to other boards that are maintained and used.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit's implementation update Vendor Model dummy response
value in vnd_get() instead of vnd_set_unack().
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Removed bug which get introduced by PR:9521. Because of it
not able to save App's variable on SoC flash.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
The OpenAVNU gPTP daemon repository has changed so the compile
instructions were not working.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Do not limit to whitelisted boards, instead make it build/run for any
board that defines required DTS macros.
Simplified documentation and made it more generic. Remove HW setup and
made sample work with built-in LEDs and buttons.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not limit to whitelisted boards, instead make it build/run for any
board that defines required DTS macros.
Remove QMSI kconfigs and depend on DTS only.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not limit to whitelisted boards, instead make it build/run for any
board that defines required DTS macros.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not limit to whitelisted boards, instead make it build/run for any
board that defines required DTS macros.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
1. Modified fade_led PWM example to include
nRF HW PWM option.
2. Added fade_led nrf52_pca10040.overlay
in order to enable PWM node and choose
output PWM GPIO for channel 0. Channel 1
GPIO enable but not used in sample src.
Signed-off-by: Gaute Gamnes <gaute.gamnes@nordicsemi.no>
The Code need to be align after introduction of stream codec to
setting serialization subsystem.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Remove QEMU instructions as those do not work. Add native_posix
board instructions for running gPTP with linuxptp daemon.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This sample was creating objects from header file in the bss.
Fixed it by moving the objects to appropriate object files.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This sample provides an example for using the code relocation
feature. This example will place text,data,bss from 3 files to
various parts in the SRAM. For this a custom linker file is used
which is derived from include/arch/arm/cortex_m/scripts/linker.ld.
Signed-off-by: Varun Sharma <varun.sharma@intel.com>
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
We get an intermittent fail when running on qemu_xtensa. Disable this
sample for now on that platform to allow sanitycheck / CI to pass for
other PRs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Removed Console dependencies from shell uart backend.
Generated define: CONFIG_UART_SHELL_ON_DEV_NAME for each board.
Fixes#10191
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Use generic logging macros LOG_*() instead of NET_*() as the
latter are mostly meant for internal networking stack use.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove network specific default and max log level setting
and start to use the zephyr logging values for those.
Remove LOG_MODULE_REGISTER() from net_core.h and place the
calls into .c files. This is done in order to avoid weird
compiler errors in some cases and to make the code look similar
as other subsystems.
Fixes#11343Fixes#11659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add Bluetooth, 802.15.4 and OpenThread overlay configurations to socket
echo_client and echo_server samples.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Sample application to demonstrate usage of cmsis_rtos_v1 APIs
with dining philosopher's problem implementation.
This covers semaphores, mutex and thread APIs of CMSIS RTOS V1.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
Corrected state binding. With this commit Light Lightness
actual state would not cross its upper & lower limit.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Function names should have a verb as the last component.
As per this standard, rename some fuunctions names.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Due to recent changes some bugs had introduced in Gen. Level Move
GET & Publish functionalities. Now separatly introduced
gen_level_move_get() and gen_level_move_publisher() to resolved it.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
