Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Files including <zephyr/kernel.h> do not have to include
<zephyr/zephyr.h>, a shim to <zephyr/kernel.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
These drivers use stack buffers to hold AT command strings which are
generated at runtime using sprintk. The buffers are only sized for the
expected range of values, not the full possible range given the datatypes
involved. Values outside this expected range could cause a buffer overflow.
To mitigate this, increase the size of each buffef to hold the full range
of each parameter type.
Signed-off-by: Keith Packard <keithp@keithp.com>
Do not truncate outgoing datagrams if they do not fit in maximum handled
packet size. Set EMSGSIZE errno and return -1 instead.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Coverity reported unused value for a variable "ret" in the function
send_socket_data(). Indeed there were two subsequent assignments
to "ret", meaning that the first one was unused.
The root cause of the problem is not checking the value of "ret"
after correctly invoking a function within send_socket_data(). Fix
this by adding appropriate checks.
Coverity-CID: 215249
Signed-off-by: Aleksandar Markovic <aleksandar.markovic.sa@gmail.com>
Move away from 'modem_pin' abstraction as it has not obvious value compared
to generic 'gpio_dt_spec'.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a separate macro for registering offloaded sockets implementation,
along with information in the structure whether the implementation is
offloaded or not. This allows to differentiate between native and
offloaded socket implementations, which is critical for binding socket
API with an interface.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Instead of keeping a boolean informing whether a network interface is
offloaded at socket layer or not, keep a pointer to a function which
allows to create an offloaded socket. Native interfaces keep this as
NULL, while for offloaded interfaces it allows to connect an offloaded
socket implementation with an interface.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Check if requested socket family, type and protocol are all supported by
the driver, instead of blindly acknowledging every possible variant.
There is explicit support for UDP, TCP and TLS on top of IPv4 and IPv6.
TLS seems to be supported only in 1.2 version, so allow just that
version.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Use configurable NET_SOCKETS_OFFLOAD_PRIORITY instead of hardcoded value
in the driver itself. This allows to select relative priority of
offloaded TLS versus native TLS when used together with
NET_SOCKETS_TLS_PRIORITY.
Drop the build assert, as always prioritizing offloaded TLS over native
TLS should be application developer choice.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
The modem sockets poll implementation does not allow
a combination of poll on modem sockets and on other sockets
like eventfd. This blocks trivial application signalling. Current
users are using a poll timeout, which needs to check if other
work needs to be done in the thread (eg: lwm2m engine).
To allow proper signalling with eventfd, the non offload poll
methods needs to work for the modem sockets.
This commit is implementing this for POLLIN.
Signed-off-by: Wouter Cappelle <wouter.cappelle@crodeon.com>
The previous bf68b67 commit incorrectly passes minfo.mdm_rssi
value to the modem context data_rssi member during the driver
initialization which causes the `modem info` shell command
to return 0 as RSSI value. Fix that by changing data_rssi
modem ctx member to a pointer that is assigned to the RSSI
variable stored within the modem driver context structure.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Changes the modem_context_sprint_ip addr to write into a provided
buffer. This approach fixes a referencing to a non existing stack
variable, without using a lot of stack space.
Tested using the by building all used modems and tested on HW using
IPv4.
Fixes: #38459
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
When creating a socket, all of the registered socket implementation are
processed in a sequence, allowing to find appropriate socket
implementation for specified family/type/protocol. So far however,
the order of processing was not clearly defined, leaving ambiguity if
multiple implmentations supported the same set of parameters.
Fix this, by registering socket priority along with implementation. This
makes the processing order of particular socket implementations
explicit, giving more flexibility to the user, for example when it's
neeed to prioritze one implementation over another if they support the
same set of parameters.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Snprintf calls should be avoid when not necessary, instead snprintk
should be used as it offers the same functionnalities at a lower cost
in flash.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
It should be "u-blox,sara-r4", because the vendor prefix for this
company is "u-blox", not "ublox".
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
So far modem API used UART device names / labels. Change API to operate
on device pointers instead, so that we stop using device_get_binding()
in modem core and in some DT compatible modem drivers.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Query the numerical network operator id, location area code (LAC)
and cell id. Following AT commands are used:
AT+COPS?
AT+CEREG?
Functionality is enabled by CONFIG_MODEM_CELL_INFO=y.
Tested with uBlox SARA-R410M-02B.
Signed-off-by: Hans Wilmers <hans@wilmers.no>
If the modem drivers are built on a 64-bit platform we get errors with
the logging code due to use of size_t. Update to use %zX to handle this
correctly between 32-bit and 64-bit platforms.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove reset pin requirement from devicetree as this
is not required for modem functionality, and is not
used in the driver anyways.
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
Replace all existing deprecated API with the recommended alternative.
Be aware that this does not address architectural errors in the use
of the work API.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Convert ublox-sara-r4 driver:
NET_DEVICE_OFFLOAD_INIT -> NET_DEVICE_DT_INST_OFFLOAD_DEFINE
DT label is already required, so use it and drop
CONFIG_MODEM_UBLOX_SARA_R4_NAME option.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This wait on @ prompt was added in
fa3d586483.
The situation were the @ prompt is never received should not occurs,
however it's definitively safer to catch it instead of having a
deadlock.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
According to AT commands manual, no wait after prompt '@'
is required if using AT+USOST commmand (aka. sendto,
only used with UDP).
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
Previously, msghdr was handled by forwarding each msg_iov to
offload_sendto() one by one.
This is not optimal, as msg_iov payload might have been sent
simultaneously which would be faster.
With this commit, send_socket_data() expect payload to be formated as
struct msghdr which can be used directly by both offload_sendto() and
offload_sendmsg().
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
This comit introduce two new Kconfig which allow to configure RSSI
polling work.
One Kconfig allow to completely disable the polling.
The other one allow to sonfigure the polling period.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
Replace hard coded wait by real detection of '@'.
This make sure that datasheet timings are correctly followed.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
Reset of the sem_response semaphore should be done before sending data.
This prevent any potential race conditions between the rx thread and the
thread running send_socket_data().
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
Constifying global data allows to save lots of RAM. Defining data inside
function as 'static const' allows on the other hand to save stack usage
and reduced code size (because data doesn't have to be copied on stack
in runtime).
This improvement allows to save 448 bytes of RAM and 88 bytes of ROM
when compiled on ARM, with default configuration.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
All net_bufs allocated to modem_cmd_handler's data->rx_buf are consumed
synchronously in ublox-sara-r4.c in the same thread. This means that
allocating them with timeout makes no sense, because timeout
will *always* be hit when there are no more buffers in net_buf_pool.
Get rid of the unnecessary timeout, as it doesn't help and just slows
down processing of incoming data, increasing possibility of data
overrun.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
So far a dedicated buffer was used for data read from modem
interface. New net_bufs were allocated and filled later, which means
that data was lost when no more net_bufs were available in the pool.
Prevent data loss by allocating net_buf before attempting any read on
modem interface. Process incoming data in a loop as long as reading from
interface results in new data. Also remove dedicated buffer
(data->read_buf) and directly fill net_buf content instead. As a side
effect there are less memory copy operations and RAM usage is reduced.
Pre-allocated net_buf is now always appended to data->rx_buf. When there
was no (more) data read from interface to such net_buf, then this empty
net_buf will be on the end of data->rx_buf fragment list. Update
skipcrlf() and findcrlf() implementations to explicitly check for each
net_buf length, instead of blindly assuming them to have at least single
byte.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
If HW flow control is enabled, then modem_context framework won't drain
UART FIFO blindly, but will stop when there is no more space in RX
ring_buf. This prevents data loss by "pausing" incoming data on hardware
level.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This API allows to drop use of preallocated isr_buf. Most importantly as
a result RAM usage is reduced for each driver utilizing modem_context
framework. Additionally there is less copying done in ISR context, as
data is direcly read from UART FIFO to ring_buf.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
PR #27485 introduced new implementations for close() that do not build
correctly. This commit fixes the problem by re-implementing them.
Fixes#27587
Signed-off-by: Vincent Wan <vwan@ti.com>
Do not route close() calls via ioctl() as that is error prone
and quite pointless. Instead create a callback for close() in
fdtable and use it directly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
By using the Zephyr-native zsock_ family of types and functions, these
drivers will be decoupled from NET_SOCKETS_POSIX_NAMES.
Signed-off-by: Adam Porter <porter.adam@gmail.com>
The implementation of offload_getaddrinfo in this driver failed
when the node it was called with was an IP address. This condition
was never detected, and as a consequence a DNS query was done on
the IP address instead of returning it directly.
Also, the port was set first after running the DNS query.
As a consequence, if the IP address would have been returned directly,
this would have been done without a port been set.
Both errors are fixed in this patch.
Signed-off-by: Hans Wilmers <hans@wilmers.no>
During communication initialisation, the IMSI of the inserted SIM
card is evaluated to determine the APN. This is done by comparing
the first 5 characters of the IMSI to a list of known providers.
The list can be given in Kconfig.
To enable this functionality, set following bool in Kconfig:
MODEM_UBLOX_SARA_AUTODETECT_APN
To set a list of providers, set following string:
MODEM_UBLOX_SARA_AUTODETECT_APN_PROFILES
If the provider can not be found in the list, the APN given in
following entry is used as a fallback:
MODEM_UBLOX_SARA_R4_APN
Signed-off-by: Hans Wilmers <hans@wilmers.no>
