Added configuration of termination current and trickle voltage
Added option to bypass low voltage charge inhibit
Added option to disable automatic recharge
Signed-off-by: Andy Sinclair <andy.sinclair@nordicsemi.no>
Some log messages could be too noisy, especially if the sensor shell was
used which would call all attr and samples even though just a few are
supported.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
For now clock can be read and written.
Clock can be set in full iso8601 time format, like 2023-12-24T12:45:56
or by just providing either data or time
Alarms not accessible
Signed-off-by: Kim Bøndergaard <kim.bondergaard@prevas.dk>
It mirrors the functionality of the vl53l0x driver.
Also removes an assert not needed, as the channel is checked.
Signed-off-by: Daniel Stuart <daniel.stuart14@gmail.com>
CONFIG_COVERAGE has been incorrectly used to
change other kconfig options (stack sizes, etc)
code defaults, as well as some samples behaviour,
which should not have dependend on it.
Instead those should have depended on COVERAGE_GCOV,
which, being the one which adds special code and
temporary RAM storage for embedded targets,
require changes to many features.
When building for the native targets, all this was
unnecessary.
=> Fix the dependency.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
CONFIG_NOCACHE_MEMORY is a valid way of declaring buffers in
nocache regions. Consider them valid in the stm32 SPI driver
nocache check. Also, don't check NULL buffers as the SPI
interface states that such buffers will result in sending
zeroes.
Signed-off-by: Daniel Gaston Ochoa <dgastonochoa@gmail.com>
Increase the default init priority of nct38xx so that they work well
with the default I2C init priority (50).
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The CMSIS module glue code was part of arch/ directory. Move it to
modules/cmsis, and provide a single entry point for it: cmsis_core.h.
This entry header will include the right CMSIS header (M or A/R).
To make this change possible, CMSIS module Kconfig/CMake are declared as
external, allowing us to add a new Zephyr include directory.
All files including CMSIS have been updated.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This CL introduces new Flash Interface Unit (FIU) hardware in npcx4
series. The different operations of npcx9 and npcx4 FIU include:
1. 4-byte mode support for DRA mode move to SPI_DEV reg
2. To access the second flash in DRA mode, we need to configure
SPI_DEV_SEL field in BURST_CFG additionally.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
This CL introduces new clock architectures in npcx4 series and wraps
clock configurations of different series by device tree files.
For example, the PWDWN_CTLx reg initialization relies on `pwdwn-ctl-val`
prop of pcc DT node now.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
The return variable rc in sbs_gauge_do_battery_cutoff() needs to
be initialized, or else it would return random value if the for
loop is never entered.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
channel_get was doing using floating point constants with it's calculation.
The result is changed to be a float as this was generating a double
promotion warning.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
There are various call to z_soc_cached_ptr() which returns values
in the cached address space and are stored in temporary variables
that are not marked as in the cached address space. This results
in sparse complaining about discarding the cached address space
attribute. These temporary variables are then passed to other
internal memory management related functions which do not have
the concept of cached address space (as it is currently Xtensa
specific). Because of this, we cannot change the signature of
these functions. Instead, we force a change of address space
when those temporary variables are being assigned to suppress
sparse warnings.
Reported-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
With gcc from the zephyr sdk and -Wold-style-declaration is giving this
output:
zephyr/arch/arm/core/aarch32/cortex_a_r/fault.c:101:1: warning:
'inline' is not at beginning of declaration [-Wold-style-declaration]
101 | static void ALWAYS_INLINE
z_arm_fpu_caller_save(struct __fpu_sf *fpu)
| ^~~~~~
I searched to all of the source code to find these further occurances
where inline is not at the beginning of a function declaration.
Signed-off-by: Florian La Roche <Florian.LaRoche@gmail.com>
The `<zephyr/posix/time.h>` header was unused in `fpga_ice40.c`
so remove it.
This fixes an error about `pthread_attr_t` not being defined.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Refcounting is used to track ALH block usage and to
call alh_claim_ownership()/alh_release_ownership() accordingly.
This is however incorrectly done on ALH instance basis, which
means when one instance is released, ownership can be released
even though one ALH instance is still active.
Fix the logic by tracking ALH usage as a global property
which matches the alh_claim_ownership/alh_release_ownership
semantics.
Link: https://github.com/thesofproject/sof/issues/7759
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Align all sensor drivers that are using stmemsc (STdC) HAL i/f
to new APIs of stmemsc v2.3
Requires https://github.com/zephyrproject-rtos/hal_st/pull/16
Signed-off-by: Armando Visconti <armando.visconti@st.com>
AXP192 is a small power management IC, that also
features 5 GPIOS.
Besides GPIO driver this commit also includes needed modifications
in axp192 regulator and mfd driver as LDOIO0 functioanlity
is multiplexed with GPIO0 pin.
Signed-off-by: Martin Kiepfer <mrmarteng@teleschirm.org>
Add Kconfig to set sleep timeout between empty read attempts in rx thread
for ethernet native posix driver.
Signed-off-by: Nicola Ochsenbein <Nicola.Ochsenbein@husqvarnagroup.com>
Many fuel gauge ICs offer a battery cutoff/shipping mode functionality that
cutoff charge from the battery. This is often useful for preserving battery
charge on devices while in storage.
Add battery cutoff support to the fuel gauge API with a generic default SBS
driver showing an example of support in tests.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Added support to connect to an HCI TCP Server. This
allows to do integration tests with other frameworks
that support a virtual hci interface.
Signed-off-by: Victor Chavez <chavez-bermudez@fh-aachen.de>
This code was added to CI after the `-Wshadow` stack was prepared, so it
was not fixed together with the rest.
Signed-off-by: Diego Elio Pettenò <flameeyes@meta.com>
RCX and RC32K oscillators are not precisely trimmed.
This code allows to measure actual frequency of those two
oscillators.
Device tree binding were extended to specify calibration
interval. This interval (in seconds) is used to periodically
call work that will perform oscillator frequency measurement.
For XTAL32K settle time can be provided in device tree.
After this time (depending on actual oscillator used)
XTAL32K is assumed to be stable and low power clock driven by
XTAL32K is considered OK for precise usage in bluetooth.
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
This enables -Wshadow to warn about shadow variables on
in tree code under arch/, boards/, drivers/, kernel/,
lib/, soc/, and subsys/.
Note that this does not enable it globally because
out-of-tree modules will probably take some time to fix
(or not at all depending on the project), and it would be
great to avoid introduction of any new shadow variables
in the meantime.
Also note that this tries to be done in a minimally
invasive way so it is easy to revert when we enable
-Wshadow globally. Source files under modules/, samples/
and tests/ are currently excluded because there does not
seem to be a trivial way to add -Wshadow there without
going through all CMakeLists.txt to add the option
(as there are 1000+ files to change).
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add shell commands to setup, disable, install timeout and feed a
watchdog device.
These commands reflect watchdog API.
Signed-off-by: Benjamin Lemouzy <blemouzy@centralp.fr>
There are situations in which the async API for uart can be provided
by another driver (case in point, uart_rtt), and thus there is no valid
DMA controller for the uart_sam0 driver to talk with.
By separating the configuration, there's no need to exclude samd20-based
boards (that have no DMA peripheral) from the uart_async_api tests.
Signed-off-by: Diego Elio Pettenò <flameeyes@meta.com>
Co-authored-by: Gerson Fernando Budke <nandojve@gmail.com>
Drop the data data structure and use the pin data one directly, also add
a missing const qualifier in the main conf data structure, both save few
bytes of RAM on some platforms.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add basic support of 'regulator-gpio'. For now, it is support
only controling voltage and driver presents only six functions:
* enable and disable the regulator;
* set and get voltage;
* count and list of voltage(s).
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
The prototype of `nrf_802154_energy_detected` callout has changed.
This commit adjusts to this change.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
Use the symbol iface_ctx in place of ictx. This was
introduced seemingly by mistake in PR #61510
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
Due to source data pointer having no alignment constraint,
extra care needs to be taken when reading source data
as dword
Signed-off-by: Tomislav Milkovic <tomislav.milkovic95@gmail.com>
This adds support for the max1125x (max11254, max11254)
family of spi adc devices.
Signed-off-by: Mustafa Abdullah Kus <mustafa.kus@sparsetechnology.com>
Ensure the driver enables the LTE radio during init unless boot
in airplane mode is specified.
To ensure the settings applied during init are used, the LTE radio
is turned off during config.
Fix issue where PDP and GPRS connection config could have a mismatched APN.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
