Move esp_wifi_internal_reg_rxcb() after esp_wifi_init(), so that
wifi_connect() is successful.
Fixes: 690f65dbd9 ("drivers: wifi: esp32: fix possible interface null
pointer")
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
esp32_wifi_dev_init() currently starts Wi-Fi stack before
the interface is properly configured, which happens in function
esp32_wifi_init(). This can trigger a ESP32_WIFI_EVENT_STA_START event
before interface initialization, causing a crash.
Moving esp_wifi_start() to esp32_wifi_init() will guarantee that
this won't happen.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Do not set wifi optimizations by default in order
to free up IRAM room region. In case higher throutput
is necessary, one can enable this flags to optmize it.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
In order to allow proper softAP mode, wifi
libraries and wpa supplicant requires this kconfig
to be enable.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Align Ethernet/Wi-Fi drivers/L2 with interface state handling update.
For drivers, that did not support carrier detection, no changes are
needed.
Driver that did support carrier detection, are updated to set the
carrier state to OFF by default, instead of setting the
NET_IF_NO_AUTO_START flag. This allows to postopne the actual
NET_EVENT_IF_UP notification until driver detects that carrier is ready.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Instead of using "select" on certain EC configurations, which is
considered unsafe for various reasons, use a "depends on" and rely on
the user to set a proper configuration in the config file.
Update the respective project configurations to comply with the new
configuration scheme.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Those Kconfig options are no longer used after ESP32 WiFi driver was
converted to Zephyr WiFi mgmt and the removal of platform specific
`samples/boards/esp32/wifi`.
Fixes: d524015f82 ("samples: boards: remove esp32 wifi sample code")
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Driver is not ready to handle NET_REQUEST_WIFI_CONNECT wifi_mgmt events
before ESP32_WIFI_EVENT_STA_START event is received. Revert back to setting
NET_IF_NO_AUTO_START flag for interface and call net_eth_carrier_on() after
ESP32_WIFI_EVENT_STA_START event is received. This makes it possible for an
application to wait for network interface to be ready, e.g. with:
while (!net_if_is_up(iface)) {
k_sleep(K_MSEC(100));
}
before making a connect request with:
net_mgmt(NET_REQUEST_WIFI_CONNECT, iface ...).
Fixes: 7d9edc8bf0 ("wifi: esp32: add support to wifi api mgmt")
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
The return values of esp_wifi_set_mode(), and esp_wifi_set_config() were
overwritten once esp_wifi_start() is executed.
This commit fixes that by ORing the return value to the others.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Due to Zephyr's WiFi updates, common private
enums used in `hal_espressif` are now being used.
This updates private internal values to meet hal_espressif
changes.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
ESP32 wifi connection uses Zephyr's net stack. Once WiFi connects
in station mode, is requires the application to handle DHCPv4
negotiation. This PR adds support to automatic negotiation by
handling the dhcpv4 calls in driver layer.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Moved all MBEDTLS dependencies from prj.conf
to Kconfig as WiFi depends on it.
Update esp32 wifi driver to enable `samples/net/wifi`
to work. Commands as such as `wifi connect` and `wifi scan` are now
available.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Supplicant start call is part of esp_wifi_init, which
would become duplicated if kept in here.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Update Wifi drivers to use DT_HAS_<compat>_ENABLED Kconfig symbol
to expose the driver and enable it by default based on devicetree.
Signed-off-by: Kumar Gala <galak@kernel.org>
wifi drivers that depends on native ethernet stack cannot perform
wifi API calls missing availability. This changes adds the ethernet_api
interface in wifi_mgmt so that it becomes possible.
Naming "offload" in "struct net_wifi_mgmt_offload" is kept because
Zephyr still has no supplicant to handle a full non-offloaded driver.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This PR adds a KConfig option that allows moving
all .noinit content related to wifi a net stack into external
ram. This free dram space to application.
Linker script files are also modified so that the content
are mapped into external ram.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
PHY TX power configuration must be added into soc level.
It was previously hardcoded in hal_espressif, which was removed.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Stop using redundant DEV_DATA/DEV_CFG macros and use dev->data
and dev->config instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Size of data pointer for event revival must be at least sizeof
event queue item.
Update to send whole event (id + event)
Signed-off-by: Pavlo Hamov <p.hamov@venstar.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
hal_espressif repository was updated from esp-idf v4.2
to esp-idf v4.3 to allow latest Espressif chips integration.
As a consequence, it added a few changes in drivers
and peripherals. To maintain bisectability, changes in this
PR cannot be split. Here are some details:
wifi: update linker script by adding libphy and new attributes.
spi: update some APIs and fixed missing wait_idle check
west.yml: esp32: update hal to new version
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Commit 95b916d104 ("drivers: wifi: esp32: fix reconnect issue")
switched from thread created at runtime to statically defined thread.
The difference is mainly visible for simple applications that use
CONFIG_NET_CONFIG_AUTO_INIT=y, where networking setup code is executed
before main() and any statically defined threads. All ESP32 events are
just queued and never handled, so conditions enforced by
CONFIG_NET_CONFIG_NEED_IPV4=y are never met (e.g. Zephyr networking
layer is never informed about being connected).
Switch back to thread created at runtime, which starts at the moment
when k_thread_create() is invoked. This allows ESP32 event processing to
happen just after ESP32 WiFi driver gets initialized and before Zephyr
network auto initialization code (CONFIG_NET_CONFIG_AUTO_INIT=y).
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Device won't reconnect automatically even if
AP station is available. This fix adds the carrier event, indicating
that network is present again enabling DHCP bound event.
Also, internal wifi event callback was added into wifi
driver to enable proper event handling.
Update west.yml to bring exposed wifi event callback.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Fixes#33843
When BT and WiFi coexists, IRAM usage increases a lot.
Add configuration that allow wifi symbols
to be placed in flash, freeing space in IRAM.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
