Update Zephyr fork of MCUboot to revision:
736234caa5ee0b3090cf02e5af0c2dc798aa4beb
Brings following Zephyr relevant fixes:
- c7aa2c0 boot_serial: Fix issues with single slot mode/encrypted
images
- 6ba46c0 boot_serial: Fix issue with queued commands
- 274547c bootutil: PSA Crypto ECDSA enablement
- 8f8fbf9 zephyr: Fall back to minimal C library
- 5c5222f boot_serial: Fix include
- b847a33 espressif: use minimal libc as default for ESP32 boards
- 480b97f boot_serial: Fix missing point if using snprintf
- 3790f5f boot: zephyr: use indication LED also in timeout based
recovery
- 0035c33 zephyr: Provide third image cases for direct image
upload
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Synchronizes with the new upstream RX/TX timestamp definition in
OpenThread based on the standard's SFD.
This change is synchronized with the upstream OpenThread implementation
via west.yml.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
This commit:
* adds the `CONFIG_SOC_GECKO_SERIES0` Kconfig option for Gecko Series 0
SoCs
* selects the proper `CONFIG_SOC_GECKO_SERIESx` option where it's currently
missing
Fixes#62806.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
New nrfx revision fixes issue in the PWM driver causing build
errors due to invalid include when workaround for anomaly 109
is enabled.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Add a MBOX driver wrapper around the NXP MU, simular to
the existing wrapper around the NXP S32 MRU. This allows Zephyr IPC
to work based on the MU, on a number of NXP boards.
Also update the SHA of NXP HAL to enable the Kconfig for this driver.
Signed-off-by: Yicheng Li <yichengli@google.com>
The percepio module change removes unused kernel ports from the
zephyr version of the percepio module.
Signed-off-by: Aron Lander <aron.lander@percepio.com>
This commit adds the DFM (DevAlert target side code) module and
moves the TraceRecorder module into the percepio module, which
results in the TraceRecorder module definition being removed
from the west manufest and module definition within zephyr.
Signed-off-by: Aron Lander <aron.lander@percepio.com>
Make HCI driver compatible to the updated versions of the
EFR32 Bluetooth library BLOBs consisting of:
* libbluetooth_controller
* libbgcommon
* librail
Signed-off-by: Markus Fuchs <markus.fuchs@ch.sauter-bc.com>
Updates the TI hal modules to include the following fixes in Zephyr's
ClockP API implementation:
* The unused stubs.h header was removed.
* The ClockP implementation contained some cruft due to an incomplete
migration from the ms based to the tick based kernel timer API.
* The ClockP implementation assumed timeouts and periods to be given in
ms although TI's API always expected ticks.
* A fix for a major conversion bug in TI's own usage of the ClockP API
throughout the SimpleLink framework is included.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
update west to fetch acpica PR 882 for running CI job. This is a temp
commit to verify CI job and will update with latest commit once acpica
PR get merged into mainline.
Signed-off-by: Najumon B.A <najumon.ba@intel.com>
In this board, there are eight PWM channels from
EMIOS 0 CH0 --> EMIOS 0 CH7 that can be used to
generate PWM pulse to outside of the board.
Moreover, there are three RGB leds that can use
PWM pins for blinking, faded leds
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Update TF-M version with fix for build with shared boot data enabled,
i.e. CONFIG_TFM_MCUBOOT_DATA_SHARING=y.
Regression from: 485fa940aa
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
* In Zephyr: The HW models now include N interrupt controllers
The interrupt handling code needs to target one controller
specifically.
* Update the HW models module to
57b61a9a2da75c860f15ca79522b24d57992df2c
Including the following:
* 57b61a9 INT CNTRL: Generalize to N controllers
* 1ea8194 nrf_bsim_redef.h: Add first definitions for nrf5340
* 5f81ee9 irq_ctrl: Lower a bit HW event priority
* 0986acc RNG: Add nrf53 variant in model
* 09345da RNG: Generate level interrupts instead of pulse ones
* f9b7c7a DPPI: Add first version
* 62dabd3 HW models: Initial peripheral adaptation for multi-int_cntr
* f54b59d HW models: Adding initial nrf5340 structure
* fb1edd9 HW models: Use HW types definitions only where neded
* 2744f4c Add basic support for variants
* a5f79cd nrf_bsim_redef.h: Remove unnecessary redefinitions
* 2c781dd HW_models: Improve includes
* bdb0a08 minor: Remove non-ASCII characters from source
* b5e95bd RADIO: Corrected note about MAXLEN and CRCINC behaviour
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update SNVS pin names in RT11xx DTSI files to align with new pin data
generated for the RT1176 and RT1166 processors. This pin data is stored
within the NXP HAL, so the SHA of the HAL is also updated by this
commit.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
- fix i2c hang issue
- switch hpet/i2c/uart/gpio to use osxml generated header files for
IP registers
- spi dma support
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
Update Zephyr fork of MCUboot to revision:
11ecbf639d826c084973beed709a63d51d9b684e
Brings following Zephyr relevant changes and fixes:
- 11ecbf63 zephyr: use cmsis_core.h header
- da65db00 zephyr: Provide slot definitions for three images
- 2c61caf6 bootutil: Move flash_area_id_to_image under ifdef
- 904d0c46 bootutil: Add DirectXIP version of boot_set_next
- 2a874b6e zephyr: Do not build in debug mode
- 258a6c7d bootutil: Fix support for more than 2 flash areas
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The Xtensa HAL has been updated with the following changes:
* Removed intel_s1000 overlay files as it is no longer needed.
* Fix uninitialized variable warning in xthal_v2p()
* Add config and overlay files for dc233c core so we can use
QEMU with this core to test MMU code.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Convert the nrf52_bsim board, to use the native simulator
as its engine.
This means some of the functionality the board included
before is now handled by the native simulator, including
the overall program main and CPU/HW scheduling.
Note that this board remains separate from the native_sim
board, even if both use the native simulator.
Also update the nRF HW models component to a new version
which has been converted into an extension for the
native simulator.
After this change, it becames also possible to build
the nrf52_bsim with an embedded C library, and to
use with it the Zephyr POSIX API shim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The CMSIS module glue code was part of arch/ directory. Move it to
modules/cmsis, and provide a single entry point for it: cmsis_core.h.
This entry header will include the right CMSIS header (M or A/R).
To make this change possible, CMSIS module Kconfig/CMake are declared as
external, allowing us to add a new Zephyr include directory.
All files including CMSIS have been updated.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The nRF HW models have been updated to include the following
fixes and improvements:
* RADIO: Handle MAXLEN and other related improvements
* PPI: Added 2 notes about status and shortcommings
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Align all sensor drivers that are using stmemsc (STdC) HAL i/f
to new APIs of stmemsc v2.3
Requires https://github.com/zephyrproject-rtos/hal_st/pull/16
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The existing heap starts at the beginning of SPIRAM which is also occupied
by the WiFi stack if CONFIG_ESP32_WIFI_NET_ALLOC_SPIRAM is enabled. This
results in memory corruption.
Update the linker description to add a _spiram_heap_start symbol and add a
KConfig size option to allow the SPIRAM stack to be correctly located and
sized. Requires matching commit in hal_espressif.
Fixes: 61359
Signed-off-by: Eric Holmberg <eric.holmberg@northriversystems.co.nz>
This enables the power management for Intel ISH. It supports D0i1,
D0i2, D0i3 power saving modes for ISH.
Signed-off-by: Leifu Zhao <leifu.zhao@intel.com>
The change is to update the location of the NXP HAL license file (BSD-3)
to the root of the NXP HAL repo.
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
Implement the sys_poweroff hook for all ESP32 SoCs based on the previous
SOFT_OFF implementation.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The nRF HW models have been updated to include the following
fixes and improvements:
* TIMER: Fix bogus events/interrupts if shorts where used
* PPI: Handle well an event triggering a task twice
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update trusted-firmware-m to 1.8.0, mbedtls to 3.4.0, and tf-m-tests to
1.8.0. Includes minor cmake changes due to file renames and such, as well
as adjusting the return type of a callback function that has changed since
the previous version of trusted-firmware-m.
Signed-off-by: David Brown <david.brown@linaro.org>
