Add zephyr,memory-region compatible and attribute to SOC memory regions,
so that sections will be generated and MPU attributes can be applied.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Use the messaging unit to ensure that the RT11xx dual core mode will
wait for the second core to boot successfully during early init
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
RT11xx features CM4 core, which must be booted from CM7 core. Add
support for loading an image for the CM4 to RAM, and booting the CM4 core
from this image. Each image is built independently using sysbuild, and the
M4 image build produces built collateral with load address information the
M7 image can use to load it to RAM
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Allow linking code into OCRAM region when building for RT1xxx SOCs. This
can be used on the RT11xx dual core SOCs as a shared memory region, when
the M7 core needs to load code into a region accessible to the M4 core.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Low-power management is part of the RTC peripherals' domain
on ESP32C3. This dependency implies the need to bring some RTC
registers to a known state, during system initialization, to
achieve proper low-power handling.
The RTC slow memory region is also delimited and used during
power domain options selection.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
Low-power management is part of the RTC peripherals' domain
on ESP32S2. This dependency implies the need to bring some RTC
registers to a known state, during system initialization, to
achieve proper low-power handling.
The RTC slow memory region is also delimited and used during
power domain options selection.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
- Adds initial system power management support.
- Adds option to add extra delay when waking from
deep sleep.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
Low-power management is part of the RTC peripherals' domain
on ESP32. This dependency implies the need to bring some RTC
registers to a known state, during system initialization, to
achieve proper low-power handling.
The RTC slow memory region is also delimited and used during
power domain options selection.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
Expand ifdef by adding new Kconfig option UDC_KINETIS as
preparation for USBFSOTG UDC driver.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add new variant configuration of it81202cx and it81302cx.
This cx variant of it81xx2 changes are as follows:
1. SRAM size will increase from 60k to 128k.
2. Configurable ILM size is still 60k.
3. Support M extension of RISC-V.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
The cache operations must be quick, optimized and possibly inlined. The
current API is clunky, functions are not inlined and passing parameters
around that are basically always known at compile time.
In this patch we rework the cache functions to allow us to get rid of
useless parameters and make inlining easier.
In particular this changeset is doing three things:
1. `CONFIG_HAS_ARCH_CACHE` is now `CONFIG_ARCH_CACHE` and
`CONFIG_HAS_EXTERNAL_CACHE` is now `CONFIG_EXTERNAL_CACHE`
2. The cache API has been reworked.
3. Comments are added.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
When MCUBoot is enabled, IRAM region needs to be set
to a smaller value to avoid overlapping. This shall be re-worked
when MCUboot build for ESP32 is performed in Zephyr environment.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Add a hidden Kconfig option to select the index of the target RTU
(Real-Time Unit) subsystem. This index can be used by peripheral
drivers, for example, to know the peripheral instance index since the
HAL is index-based.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
Microchip XEC GPIO pins support inverting the output of
alternate pin functions. This feature may be useful for
those peripherals that do not implement output inversion
in the peripheral. GPIO control register pad input and
parallel input register values are not affected by the
function output invert feature. GPIO interrupt detection
of an output is inverted if the invert polarity is enabled.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
Added a missing SDK function POWER_PowerInit
to the clock_init function of the soc in lpc55S36.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
- Put L2C init level in pre_kernel_2 to wait for syscon driver
- Check if SMU exists when preprocessing
Signed-off-by: Wei-Tai Lee <wtlee@andestech.com>
Control shared interrupts enabling/disabling via IDU.
With that we can easily enable and disable them for all cores
in one place.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
EXTRA_IMGTOOL_ARGS is used to set additional options by the user.
Any user change will overwrite this option, which
is unintuitive.
Also option ROM_START_OFFSET will be overwritten which is also unintuitive.
Replace hardcoded config option MCUBOOT_EXTRA_IMGTOOL_ARGS
with proper config ROM_START_OFFSET.
Signed-off-by: Maciej Zagrabski <mzi@trackunit.com>
Be consistency with zephyr.strip
This will help with reproducibility issues like the one in
https://github.com/thesofproject/sof-bin/pull/106
Use the `strip_command` introduced by commit c060b075a6 ("cmake:
toolchain: bintools abstraction")
boot.mod is already deterministic because it has no debug symbols; no
need to strip it.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
SOF compilation is sensitive to compilation warnings
Some simple and neutral changes to avoid them
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
IMR save and restore context is a flow implemented for ACE
move boot specific procedures to ace subdir
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
In ACE architecture, only core 0 should receive IPC interrupts from host.
Unmasking secodnary core IPC interrupts was causing race condition in
ipc irq handler after enabling secondary core.
Signed-off-by: Przemyslaw Blaszkowski <przemyslaw.blaszkowski@intel.com>
The linker script for intel_adsp ace was missing the
snippets-sections.ld include, causing it to ignore any custom section
defined in with cmake zephyr_linker_sources().
Adding it in the same location as it's done in xtensa-cavs-linker.ld.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
HAL for NXP S32 is updated to a newer version, hence some headers and
macro definitions must be updated accordingly.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
Update rt5xx base address calculation to use the zephyr,chosen flash node
to determine flash base address. Note that due to the external flash
controller, the flexSPI base address must be used when the flash device
is on the flexSPI bus.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Update rt6xx base address calculation to use the zephyr,chosen flash node
to determine flash base address. Note that due to the external flash
controller, the flexSPI base address must be used when the flash device
is on the flexSPI bus.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Context save is saving whole memory to persistent
memory area, than turning off memory and CPU
Context restore is a modified boot flow, where
the previously saved context is restored
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
Updated the clock_init function to the latest sdk
and added a safe initialization for the flash setup
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Added a selecion on rt6xx that allows the loading of
the safe flash clock initialization to be inside SRAM
if the user code is being executed from flash.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Call CMSIS SystemInit at early platform boot, to ensure that registers
are configured correctly on RT10xx series.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This patch updates ipc response procedure in power down function. New
flow is only limited to the writs into two registers. We need to clear
the IPCxIDD register in case if its contains any leftovers from a
previous responce. And then write a response to the IPCxIDR.
To prepare response we need to copy incoming request and then mark it as
replay. New message with IPC Busy bit set is then send to host.
The reason for this is a change in the behavior of the IPC driver
compared to how it worked when this function was originaly implemented.
The biggest difference are enabled interrupts in register IPCxCTL.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Zephyr maps start/end of rodata section with variables
using __rodata_region namespace. The exception was Xtensa.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add XIP support with MWDT toolchain. To have it proper tested
add separate nsim platforms for XIP (flash + sram) and
non-XIP (sram) memory organization in addition to existing
nsim_hs platfor with CCMs (ICCM + DCCM) memory organization.
This PR also enables MPU for all nsim hs3x based platforms
(like we previously enabled it for qemu_arc_hs) to have proper
memory regions permissions.
Signed-off-by: Nikolay Agishev <agishev@synopsys.com>
Since DTS doesn't contain the BDF anymore (it's looked up at runtime),
hardcode the BDF value for the use of early serial.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
