Instead of CONFIG_COAP_MBEDTLS_SSL_MAX_CONTENT_LEN, use recently
introduced CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This value allows to set max payload length of a TLS protocol
message, and passed thru to mbedTLS as MBEDTLS_SSL_MAX_CONTENT_LEN
setting. The only safe value is 16384, which translates to 32KB
of RAM required just for mbedTLS input/output buffers. Any other
value can be configured *only* per a particular application
(e.g. knowing that it won't pass more than spefific amount of
data at once and/or won't connect to a server with a long cert
chain). Previosuly, we had quite an adhoc and inflexible config
with random values for that setting, based on protocol.
Note that while the safe value is 16384, "backward compatible"
default of 1500 is used (good for DTLS on the other hand).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
stm32l0xx_ll_spi.h causes compile warnings about aliasing.
Solution for F0 works here as well.
Tested on STM32L073RZ with 16-bit transfers.
Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
STM32Cube doesn't provide a USB LL API for STM32L0XX series.
This patch removes stm32l0xx_ll_usb.c from CMakeLists because
it doesn't exist.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
With the introduce of VFS the typedef for fs_file_t & fs_dir_t don't
exist anymore so we need to use 'struct fs_dir_t' or 'struct fs_file_t'.
Fix up some places that got missed in the VFS conversion.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This Kconfig 'source' statement had no effect as it was referencing a
non-existing Kconfig file. It is not clear if the intention is to
include-if-exists, but I presume not.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This adds the HAL code needed for the SoC in a later patch for
the stm32l0 series.
Origin: ST Microelectronics
License: BSD-3-Clause
URL: http://www.st.com/en/embedded-software/stm32cubel0.html
Commit: 1.10.0
Purpose: HAL layer for stm32l0
Maintained-by: External
Signed-off-by: Endre Karlson <endre.karlson@gmail.com>
To comply with Zephyr Contributing guidelines regarding
ext/ components, update README for STM32L4 series
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
To comply with Zephyr Contributing guidelines regarding
ext/ components, update README for STM32F7 series
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
To comply with Zephyr Contributing guidelines regarding
ext/ components, update README for STM32F4 series
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
To comply with Zephyr Contributing guidelines regarding
ext/ components, update README for STM32F3 series
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
To comply with Zephyr Contributing guidelines regarding
ext/ components, update README for STM32F1 series
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
To comply with Zephyr Contributing guidelines regarding
ext/ components, update README for STM32F0 series
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Reduce the code duplication in ext/hal/st/stm32cube/CMakeLists.txt by
using a foreach loop instead of copy-paste for each SoC.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
mbedTLS log level is obviously a mbedTLS config setting. It makes
sense to have it defined in mbedTLS Kconfig, and different parts
of Zephyr to reuse as needed (e.g. net-app vs upcoming TLS wrapper
for sockets).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The goal of mcumgr is to define a common management infrastructure with
pluggable transport and encoding components. In addition, mcumgr
provides definitions and handlers for some core commands: e.g., image
management, file system management, and OS managment.
Origin: mcumgr
License: Apache 2.0
URL: https://github.com/apache/mynewt-mcumgr
commit: 59210e372c927e26637696f2198ff2efe8ea6897
Purpose: Introduction of mcumgr
Maintained-by: External
Signed-off-by: Christopher Collins <ccollins@apache.org>
Fix Kconfig help sections and add spacing to be consistent across all
Kconfig file. In a previous run we missed a few.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The previous default, "config-threadnet.h", is more or less arbitrary
choice made in a commit 312def2c78 1.5 years ago. In particular,
it's not related to Thread support in Zephyr per se (there was no
such support at that time).
It doesn't make sense to have a default intended for a particular,
not widely used (yet) protocol. Instead, the default should work
out of the box with a contemporary widely deployed arrays of TLS
servers, which are HTTPS server. config-mini-tls1_2.h works with
https://google.com, and by extension, with many other servers on
the Internet.
So, have that as the default, and let applications with special
needs to override that to what they need.
Addresses: #6132
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This config enables TLS 1.2 (only), as its name suggests, and
contrary to the (copy-pasted) comments in the file header, so
update these comments.
Fixes: #6131
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Atmel SAMD21 series was classified too broadly as SAMD.
This patch names it correctly to make room,
for other members of SAMD series
Signed-off-by: Sean Nyekjaer <sean@nyekjaer.dk>
- Make half float encode/decode conditional
- src/cborpretty.c, src/cbortojson.c and src/cborvalidation.c
conditionally include math.h and half float type support
- Conditionally include math.h in src/compilersupport_p.h to avoid
newlib libc from getting compiled in
- Conditionally compile src/cborparser_dup_string.c if newlib libc is
compiled in
Signed-off-by: Vipul Rahane <vipulrahane@apache.org>
The TinyCBOR library is a small Concise Binary Object
Representation (CBOR) encoder and decoder library, optimized for
very fast operation with very small footprint.
Origin: TinyCBOR
License: MIT
URL: https://github.com/intel/tinycbor
Version: 0.5.0-beta1
commit: 497066ee87dd54341adaa1195bf15ad11ee33b20
Purpose: Introduction of TinyCBOR
Maintained-by: External
Signed-off-by: Vipul Rahane <vipulrahane@apache.org>
Disable compilation warnings for altera_avalon_i2c.c as it is not
maintained in Zephyr.
Cmake does not allow us to use set_source_files_properties on
source files directly, these files need to be linked to either
a target executable or a target library. Due to the above reason,
altera_avalon_i2c CMakeLists.txt creates a library and links the
source file to the zephyr library.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add wrapper or helper functions for Altera HAL runtime API's to
enable Altera HAL drivers on Zephyr.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Due to a security advisory released on February 1st 2018[1], it's
advisable to update mbedTLS to 2.7.0.
The vulnerability, identified as CVE-2018-0488 and CVE-2018-0487, risk
remote code execution when truncated HMAC is enabled or when verifying
RSASSA-PSS signatures.
[1] https://tls.mbed.org/tech-updates/security-advisories/mbedtls-security-advisory-2018-01Fixes: #6025
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add Altera Nios-II QSPI Controller HAL driver to Zephyr.
The sources are taken from the Altera SDK v17.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
The argument is a u32_t which limits the maximum disk size to 4 GiB.
Rather than fix this, delete the ioctl and switch the only use to
GET_SECTOR_COUNT instead.
Signed-off-by: Michael Hope <mlhx@google.com>
Kbuild supported CONFIG_MBEDTLS_LIBRARY and
CONFIG_MBEDTLS_INSTALL_PATH to allow users to link in an externally
built mbedtls. This was not ported over to CMake, causing build
failures when it was kconfig-enabled.
This patch implements this support. This support has been tested
as well as MBEDTLS_LIBRARY was tested in CI.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Signed-off-by: Ding Tao <miyatsu@qq.com>
CONFIG_MBEDTLS means you are using MBEDTLS
CONFIG_MBEDTLS_BUILTIN means you are using a built-in MDEDTLS
CONFIG_MBEDTLS_LIBRARY means you are using an external MBEDTLS
This patch ensures that you must select one or the other
implementation when MBEDTLS is enabled.
Tested by opening xconfig and observing that when MBEDTLS was enabled,
BUILTIN was automatically enabled, and a radio-button interface
existed to change the implementation.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Signed-off-by: Ding Tao <miyatsu@qq.com>
The old HAL and MDK have been removed from the source tree.
Since RADIO HAL is not yet present in nrfx, the "nrf_radio.h" file
was temporarily moved to "nrfx/hal" folder. It will be replaced with
the proper file from nrfx in its next update.
Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit adds a glue layer that adapts nrfx to be usable in Zephyr
as a host environment and files with static configuration of nrfx
drivers for several supported SoCs.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
nrfx is an extract from the nRF5 SDK that contains solely the drivers
for peripherals present in Nordic SoCs, for convenience complemented
with the MDK package containing required structures and bitfields
definitions, startup files etc.
Origin: nrfx
License: BSD 3-Clause
URL: https://github.com/NordicSemiconductor/nrfx/tree/v0.8.0
commit: b7cfe970b45ad7cc9c36b62ee620508e9e2c7fb5
Purpose: Provide peripheral drivers for Nordic SoCs
Maintained-by: External
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The generic library provided by ST in ext/hal/st/lib/sensor/vl53l0x
needs to be adapted to the platform. In this case, the main
modification is the way to use I2C. This is now using the Zephyr
I2C API.
Signed-off-by: Vincent Veron <vincent.veron@st.com>
In order to ease the usage of its sensors, STMicroelectronics provides
some generic libraries. The first sensor to use that is vl53l0x time of
flight sensor. I have made the implementation generic enough to add some
more libraries in the future.
All the libraries will be located in ext/hal/st/lib.
The vl53l0X library is made of 2 parts :
* the core, that is generic to all platforms
* the platform, contains the adaptation layer. This will be
implemented in driver as it is Zephyr specific.
Origin: ST Microelectronics
License: BSD-3-Clause
URL: http://www.st.com/en/embedded-software/stsw-img005.html
Commit: 1.0.2
Purpose: API to ease the usage of vl53l0x sensor
Maintained-by: External
Signed-off-by: Vincent Veron <vincent.veron@st.com>
Add usart-yaml in dts.
Build fsl_lpc_usart and fsl_lpc_flexcomm in
ext/hal/nxp/mcux/drivers/Makefile.
Only polling mode is implemented in usart now. Interrupt can be added in
future.
Signed-off-by: Shiksha Patel <shiksha.patel@nxp.com>
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
By providing USE_STM32_HAL_* and USE_STM32_LL_* menuconfig
options drivers and user aplications can select parts of the HAL
without needing to change the Zephyr source code.
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
Current implementation of LL_SPI_TransmitData16 on F0 family
generates following warning:
"warning: dereferencing type-punned pointer will break strict-aliasing
rules [-Wstrict-aliasing]"
Besides being forbidden by rule, this cast is not needed, as register is
16 bits wide. Modification has been tested on F0 SoC.
stm32yyxx_ll_spi.h being included in soc.h file, warning is generated
at each compiled object, this commit allows a clean build.
This issue is referenced in ST and tracked under
reference 13359. Code will be updated on upcoming stm32cube updates.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Atmel Software Framework (ASF) provides a set of low-level header
files that give access to different hardware peripherals of Atmel's
ICs.
Origin: Atmel SAMD21 Series Device Support (1.2.276)
License: Apache-2.0
URL: http://packs.download.atmel.com/Atmel.SAMD21_DFP.1.2.276.atpack
Purpose: Introduction of ASF for the SAM0 series.
Maintained-by: External
Signed-off-by: Michael Hope <mlhx@google.com>
mbedTLS include directories will now default to be in the 'app'
include path when mbedTLS has been enabled.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The CoAP samples use an MBEDTLS config "config-coap.h" which could be
re-used by the LwM2M sample, except that most servers use a larger
maximum content length setting of 1500 bytes.
Let's add a CONFIG to set this for users of the CoAP lib and set the
CONFIG value for the samples to the 256 size currently used.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Add the basic infrastructure like driver <-> IRQ mapping table
and ZEPHYR_RTOS compile time flag which are neccessary to make
use the HAL drivers from Zephyr shim drivers.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add the Altera HAL sources from Altera Quartus Lite SDK
to Zephyr OS under 'ext/hal/altera' folder.
Origin: Altera Quartus Prime Lite SDK
URL: http://dl.altera.com/?edition=lite
Version: v17.0
Purpose: Provides HAL support to Altera's soft IP's
Maintained-by: External
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Adds a new gpio driver for the NXP i.MX family of SoCs. Read, write,
configure, and callback API functions are all implemented.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds mcux 2.3.0 drivers and device header files for the mimxrt1051 and
mimxrt1052. Updates several drivers that were already imported for other
SoCs but also apply to the mimxrt1051 and mimxrt1052.
Origin: NXP MCUXpresso SDK 2.3.0
URL: mcux.nxp.com
Maintained-by: External
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
After the cmake conversion, the SimpleLink WiFi host
driver would not build, and compiler flags like -Wno-strict-aliasing
were not being applied as they got spliced in before
-Wall rather than after.
This fixes those issues, using the set_source_files_properties()
method as suggeted in the CMakeLists.txt TODO comment.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Version 0.2.8 of this library has been released on Aug 29, and this
patch updates the library from version 0.2.7. A summary of changes
is available at the official repository at:
https://github.com/01org/tinycrypt/releases/tag/v0.2.8
A number of the changes we already had in tree, so the import to sync
with v0.2.8 is pretty minor.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Mysterious TLS errors are printed if we try to work with too
small crypto buffer when https is enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support for nrf52 series SOC. This patch Adds :-
1. Architecture specific Power Management APIs.
2. APIs for invoking various Power Management tasks into nrf52.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Set default MBEDTLS_HEAP_SIZE to 512 which fixes the driver Kconfig
dependency issues.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
This should clear up some of the confusion with random number
generators and drivers that obtain entropy from the hardware. Also,
many hardware number generators have limited bandwidth, so it's natural
for their output to be only used for seeding a random number generator.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The commit delivers HAL/LL static library source files for STM32F0 SoC.
Using STM32Cube provides generic access to all families, maximizes
code reuse across different STM32 families and helps taking benefits
of a mature SDK.
Origin: STM32Cube
URL: http://www.st.com/en/embedded-software/stm32cubef0.html
Purpose: Introduction of STM32F0xx STM32Cube definitions
and Abstraction Layers
Maintained-by: External
Original STM32Cube tree structure has been modified to a minimum
structure for a better fit into Zephyr. HAL is split into 2 parts:
-driver: initially Drivers/STM32F0xx_HAL_Driver, contains HAL and LL
-soc: initially Drivers/CMSIS/Device/ST/STM32F0xx, contains stm32f0xx
SoCs header files.
Fixes#3923
Signed-off-by: Maciej Debski <maciej.debski@rndity.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Adds a new clock control driver for Kinetis SoCs that have the system
integration (SIM) module. This will allow mcux shim drivers, such as
uart and i2c, to abstract the call to CLOCK_GetFreq() behind the
clock_control interface and thus be reused for SoCs with different clock
architectures.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This patch sets the correct LSI_VALUE, according to
STM32F3 reference manual's (RM0316) section 9.2.5 and
STM32F1 reference manual's (RM0008) section 7.2.5.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
This patch adds Kconfig/build support to MSP432P4XX
SDK. MSP432P4XX microcontrollers have driverlib flashed
onto the ROM, which will be used by default.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There are some minor conflicts or porting changes needed to get the
msp432p4xx SDK to work with Zephyr:
1. Remove definition of BIT, as it conflicts with Zephyr defined one
2. Set __SYSTEM_CLOCK define based on Zephyr Kconfig define
3. Fix a build warning that gets treated as an error.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
MSP432P4XX SDK is a CMSIS based SDK offered by Texas Instruments
for supporting their Simplelink MSP432P4XX microcontrollers. The
version included in Zephyr is V1.50.00.12 which is a stripped
down version containing only HAL and SoC header support.
Origin: SIMPLELINK-MSP432-SDK
License: BSD 3-Clause
URL: http://www.ti.com/tool/simplelink-msp432-sdk
Version: V1.50.00.12
Purpose: Provides HAL support to MSP432P4XX SoC
Maintained-by: External
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
This is a USB controller driver for STM32F4xx devices using
the STM32 Cube HAL_PCD framework. This has been tested with
the cdc_acm driver on a 96b_carbon board (STM32F401RE).
This is a refactoring of:
usb: usb_dc_stm: Add support for STM32Cube HAL_PCD USB driver
Signed-off-by: Christer Weinigel <christer@weinigel.se>
[daniel.thompson@linaro.org: Removed STM32F40(157) defconfig changes
together with STM32F4Discovery pinmux and defconfig changes, updated
clock settings and pad configuration to match latest mainline]
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
[giannis.damigos@gmail.com: Change uint*_t types to u*_t types,
change SYS_LOG_USB_DC_STM_LEVEL to SYS_LOG_USB_DRIVER_LEVEL and
update pinmux to match latest arm branch]
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
The Silicon Labs Gecko SDK provides a set of low-level
header files that give access to different hardware
peripherals of Silabs EXX32 SoCs.
This patch adds build infrastructure files like Makefile
and Kconfig to introduce the Gecko SDK into Zephyr.
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
This includes:
* the Gecko SDK files for the EFM32WG SoCs
* the emlib peripheral driver files
Origin: Silicon Labs Gecko SDK
URL: https://github.com/SiliconLabs/Gecko_SDK
Version: v5.1.2 (SHA: 938464c68e6c3b2237388a692f767bb0767ec010)
Purpose: Add support for Silicon Labs EXX32 SoCs
License: Zlib
Maintained-by: External
To update the Gecko SDK, download the current version from the given URL
and replace the following folders:
* Gecko_SDK/platform/Device/ should replace ext/hal/silabs/gecko/Device/
* Gecko_SDK/platform/emlib/ should replace ext/hal/silabs/gecko/emlib/
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
This patch adds files to build the SimpleLink host driver
and its DPL port to Zephyr.
It disables the host driver build by default.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
This ports the SimpleLink WiFi host driver via its OS adaptation
layer to Zephyr OS primitives.
This was validated using an out-of-tree SimpleLink shell
application including functions for:
* WLAN connect, disconnect and scan
* Socket: UDP server and client
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
This includes:
- peripheral drivers
- driverlib (HAL)
- WiFi host driver and porting layer interface headers
See README in this patch for details.
Origin: Texas Instruments cc32xx SimpleLink SDK
URL: http://www.ti.com/tool/download/SIMPLELINK-CC3220-SDK
Purpose: Provide driver libraries and HAL for TI CC32XX SoC
Maintained-by: External
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
